anslut 012894 Pipe Fan 100 mm Instruction Manual

Item no. 012894 ****

FIE FAN

0PEATING INTUCTI0NS

Important! Read the user instructions carefully before use. Save them for future reference.
[Translation of the original instructions)

|
---|---
|
|
|

SAFETY INSTRUCTIONS

• Disconnect the product from the mains before connecting, maintenance, and/or
• Installation, maintenance, and/or repairs should be carried out by an authorized electrician and in accordance with these
• The product is intended to be connected to 230 V 1-phase installations that comply with local regulations.
• The product must be connected via a permanently installed automatic fuse with a minimum contact gap of 3 mm on all
• Check before installation that the impeller and casing are undamaged.
• There must be no foreign objects in the casing that could damage the fan blades.
• The product must only be used for its intended purpose and in accordance with these instructions. Do not make any modifications to the
• The product is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it unless they have received instructions concerning the use of the product from someone who is responsible for their safety.
• Keep children under supervision to make sure they do not play with the product.
• Take the necessary precautions to prevent smoke, carbon monoxide, and other flammable products from penetrating into the room through open flues or other fire safety
• Make sure that the air supply is sufficient for correct combustion and adequate chimney draught, to prevent backward
• The transported medium must not contain dust or other solid particles, sticky substances, or fibers.
• Do not use the product in explosive environments,g. in the vicinity of flammable liquids, gas, or dust, or in environments that contain toxic or harmful substances.
• Do not block the openings on the product to attempt to direct or adjust the airflow.
• The product is intended for permanent connection to the mains.

SYMBOLS

| Read the instructions.
---|---
| Safety class II.
| Approved in accordance with the relevant directives.
| Recycle discarded products in accordance with local regulations.

ELECTRICAL SAFETY

New installations and extensions to existing systems should always be carried out by an authorized electrician. If you have the necessary experience and knowledge (otherwise contact an electrician), you can replace power switches and wall sockets, fit plugs, extension cords, and light sockets.

Incorrect installation can result in fatal injury and the risk of fire.

TECHNICAL DATA

DESCRIPTION

• Axial fan made of plastic for supply and exhaust air ventilation of small and medium-size homes heated during The product is intended to be connected to a Ø100 mm air duct.
• The product is intended for continuous operation and permanent connection to the mains. The airflow in the system must correspond to the arrow on the fan casing.

INSTALLATION

1. Switch off the power supply.
   FIG. 1

2. Remove the cover and clip on the junction
   FIG. 2

3. Connect the fan to the mains, replace the clip, and set a delay, if necessary.
   FIG. 3

4. Replace the cover on the junction box.
   FIG. 4

5. Connect the air ducts on each side of the fan.
   FIG. 5
   

6. Connect the power supply.

DESIGNATIONS IN WIRING DIAGRAM

L Live wire

N Neutral wire

QF Automatic fuse

S External power switch

MAINTENANCE

1. Switch off the power supply.

2. Release the air ducts.
   FIG. 6

3. Clean the product with a cloth moistened with water and a mild detergent. Wipe the surface dry.
   FIG. 7

4. Use a small brush or paintbrush to clean the fan vanes and the inside of the fan.
   FIG. 8

5. Connect the air ducts to the fan.
   FIG. 9

6. Connect the power supply.

NOTE:

• Make sure no water gets into the electrical components.
• Maintenance should be carried out at least once every 6 months.

Model: 012894|
---|---
Specific energy consumption| Cold| Medium| Hot
-31 kWh/m2| -15 kWh/m2| -5 kWh/m2
Type of ventilation unit| Unidirectional
Type of drive unit| Variable speed
Type of heating system| N/A
Thermal efficiency for recycling heat| N/A
Maximum airflow| 107 rn3/h
Noise level| 56 dB(A)
Maximum output| 14 W
Reference flow| 0.021 m3/s
Reference pressure difference| N/A
Specific supplied output| 0.084 W/(m3/h)
Type of control| Manual
Maximum inner leakage| N/A
Maximum outer leakage| 2.7%
Annual power consumption| Cold| Medium| Hot
1 kWh| 1 kWh| 1 kWh
Annual savings of primary energy| Cold| Medium| Hot
34 kWh| 17 kWh| 8 kWh
Contact: www.jula.com

Care for the environment!
Recycle discarded products in accordance with local regulations.

Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

JULA AB, BOX 363, SE-532 24 SKARA
2022-01-27
© Jula AB

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>