Laserliner Gi7 Pro Laser Range Finder Instruction Manual

Laserliner Gi7 Pro Laser Range Finder

Laser Direction

Laser Projections

Completely read through the operating instructions, the Warranty and Additional Information“ booklet as well as the latest information under the internet link at the end of these instructions. Follow the instructions they contain. This document must be kept in a safe place and if the laser device is passed on, this document must be passed on with it.

Function/Application

Laser distance meter – with green DLD laser technology

• Functions: distances, area, volume, continuous measurement, angle function 1 + 2 + 3, digital bubble level and tilt sensor calibration, addition / subtraction of lengths, areas, volumes
• 360° inclination sensor for determining the horizontal and vertical distance
• Bluetooth®* interface to transfer the measured data

General safety instructions

• The device must only be used in accordance with its intended purpose and within the scope of the specifications.
• The following persons may use the device only when they are either supervised by a person who is responsible for their safety or have received instruction from this person on how to use the device:
• Persons with restricted physical, sensory or mental abilities
• Persons with no knowledge and/or experience in the use of the device
• Children (under the age of 14)
• The device and its accessories are not toys.
• Modifications or changes to the device are not permitted, this will otherwise invalidate the approval and safety specifications.
• Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
• The device must no longer be used if one or more of its functions fail or the battery charge is weak.
• Please ensure compliance with the safety regulations set out by local and national authorities with regard to the correct and proper use of the device.

Safety instructions

• Attention: Do not look into the direct or reflected beam.
• Do not point the laser beam towards persons.
• If a person‘s eyes are exposed to class 2 laser radiation, they should shut their eyes and immediately move away from the beam.
• Tampering with (making changes to) the laser device is not permitted.
• Under no circumstances should optical instruments (magnifying glass, microscope, binoculars)

Dealing with electromagnetic radiation

• The measuring device complies with electromagnetic compatibility regulations and limits in accordance with the EMC Directive 2014/30/EU which is covered by the Radio Equipment Directive 2014/53/EU.
• Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of people with pacemakers – may apply. Electronic devices can potentially cause hazards or interference or be subject to hazards or interference.
• The measuring accuracy may be affected when working close to high voltages or high electromagnetic alternating fields.

Dealing with RF radiation

• The measuring device is equipped with a wireless interface.
• The measuring device complies with electromagnetic compatibility and wireless radiation regulations and limits in accordance with the RED 2014/53/EU.
• Umarex GmbH & Co. KG hereby declares that the LaserRange-Master Gi7 Pro radio equipment complies with the essential requirements and other provisions of the European Radio Equipment Directive 2014/53/EU (RED). The EU Declaration of Conformity can be found in its entirety at the following address: http://laserliner.com/info?an=AHE

Green laser technology

• Laser modules in DLD design stand for high line quality as well as a clean and clear and therefore easily visible line image. Unlike previous generations, they are more temperature-stable and energy efficient.
• Furthermore, the human eye has a higher sensitivity to the wave range of the green laser than the red laser, for example. This makes the green laser diode appear much brighter than the red one.
• Green lasers, especially in the DLD design, thus offer advantages with regards to how visible the laser line is under unfavorable conditions.
• Approx. 6 times brighter than a typical red laser with 630 – 660 nm

DISPLAY

• a Function display
• b Measurement point (reference) rear / front
• c Display min./max. continuous measurement / area / volume / angle function 1 + 2 + 3
• d Min/max continuous measurement
• e Measurement values / measurement results / malfunction / service required
• f Slope angle device
• g Battery symbol
• h Bluetooth®* function activated i Intermediate values / min/max values
• j Addition / subtraction of lengths, areas, volumes
• k Unit m / inch / ft
• l. Length measurement
• m Min/max continuous measurement
• n Area measurement
• o. Volume measurement
• p Angle function 1
• q Angle function 2
• r Angle function 3
• s Digital bubble level
• t Tilt sensor calibration
• u Memory
• v Bluetooth®* function

KEYPAD:

1. ON / measure
2. Delete last measurement values / OFF
3. Addition of lengths, areas, volumes / view saved measurements
4. Measurement point (reference) rear / front; unit m / inch / ft
5. Length / min/max continuous measurement / area / volume / angle function 1 + 2 + 3 / digital bubble level / tilt sensor calibration / memory / Bluetooth®* function
6. Subtraction of lengths, areas, volumes/view saved measurements

• The Bluetooth® word mark and the logo are registered trademarks of Bluetooth SIG Inc.

Inserting batteries

Open the battery compartment and insert batteries (2 x typ AA) according to the symbols. Be sure to pay attention to polarity.

Switch on, measure and switch off:

To select functions:
Length / min/max continuous measurement / area / volume / angle function 1 + 2

• 3 / digital bubble level / tilt sensor calibration / memory / Bluetooth®* function

Addition and subtraction of lengths:

Min/max continuous measurement:

The LC display shows the max value, the min value and the current value.

Area measurement:

Area calculation:

Volume measurement:

Volume calculation:

Angle function 1: The measurement results are determined automatically by the 360° inclination sensor.
The back of the device can be used as a reference surface for measuring angles.

Angle function 2: The measurement results are determined automatically by the 360° inclination sensor.
The back of the device can be used as a reference surface for measuring angles.

Angle function 3: The measurement results are determined automatically by the 360° inclination sensor.
The back of the device can be used as a reference surface for measuring angles.

Digital bubble level:
The digital bubble level is used to horizontally align the measuring device.

Tilt sensor calibration:
To calibrate the tilt sensor follow the instructions on the display.

Memory function:
The device has 50 storage locations.

Data transfer

• The laser distance meter features a Bluetooth® function that enables wireless data transfer to mobile devices with a Bluetooth® interface (e.g. smartphone, tablet).

• The system prerequisites for a Bluetooth®* connection are specified at http://laserliner.com/info?an=ble

• The device can set up a Bluetooth®* connection with Bluetooth 4.0 compatible devices.

• The range is set to a maximum distance of 10 m from the terminal device and greatly depends on the ambient conditions such as the thickness and composition of walls, sources of interference as well as the transmit / receive properties of the terminal device.

• The Bluetooth® word mark and the logo are registered trademarks of Bluetooth SIG Inc.

Enable/disable Bluetooth®

When enabled the Bluetooth®* symbol appears on the display (h). When the function is active, a mobile device can connect by means of an app to the measuring device.

• The Bluetooth® word mark and the logo are registered trademarks of Bluetooth SIG Inc.

Application (app)

An app is required to use the Bluetooth® function. You can download the app from the corresponding stores for the specific type of terminal device : Make sure that the Bluetooth® interface of the mobile device is activated.
After starting the app and activating the Bluetooth®* function, a connection can be set up between a mobile device and the laser distance meter. If the app detects several active measuring devices, select the matching device. This measuring device can be connected automatically the next time it is switched on.

• The Bluetooth® word mark and the logo are registered trademarks of Bluetooth SIG Inc.

Important notices

• The laser points to the location that will be measured. No objects may get into the laser‘s line of measurement.
• The device compensates the measurement for different room temperatures. Therefore allow the device a brief adaptation period when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot be used in strong sunlight.
• The measurement results of outdoor measurements may be influenced or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the maximum deviation may be greater than 3 mm.
• Carpeting, upholstery or curtains will not reflect the laser optimally. Measure to flat surfaces.
• Measurements made through glass (window panes) can falsify measurement results.
• An energy-saving function switches the device off automatically.
• Clean with a soft cloth. Water may not be allowed to penetrate the housing.

Error codes

• Er101: Replace the battery
• Er108: Pythagorean measurement error
• Er118: Tilt sensor calibration error
• Er155: Received signal too weak or outside the measuring range
• Er181: Data transfer error
• Er194: Nil

Information on maintenance and care

Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents. Remove the battery(ies) before storing for longer periods. Store the device in a clean and dry place.

Calibration
The meter needs to be calibrated and tested on a regular basis to ensure it produces accurate measurement results. We recommend carrying out calibration once a year.

Technical Data

Technical Data (Subject to technical changes without notice. 21W08)

Distance measurement
Precision (typical)*| ± 2 mm
Measurement range (inside)| 0.05 m – 70 m
Angle measurement**
Measuring range| ± 90°
Resolution| 0.1°
Precision| 0.1°
Laser class| 2 < 1 mW
Laser wavelength| 515 nm

Operating conditions

| -10°C … 40°C, max. humidity 20 … 85% rH, no condensation, max. working altitude 2000 m above sea level
Storage conditions| -20°C … 70°C,

max. humidity 80% rH

Radio module operating data

| Bluetooth LE 4.x interface; Frequency band: ISM band 2400–2483.5 MHz, 40 channels; Transmission power: max. 10 mW; Bandwidth: 2 MHz;

Bit rate: 1 Mbit/s; Modulation: GFSK/FHSS

Automatic switch-off| 30 sec laser / 3 min device
Power supply| 2 x 1.5V LR6 (AA)
Dimensions (W x H x D)| 50 x 122 x 27 mm
Weight| 140 g (incl. batteries)

• measuring distance up to 10 m with strongly reflective target surface and at room temperature. The measurement deviation may increase by ± 0.2 mm/m for greater distances and under unfavorable measuring conditions such as strong sunlight or weakly reflective target surfaces. ** at max. 5000 lux

EU directives and disposal
This device complies with all necessary standards for the free movement of goods within the EU.
This product is an electric device and must be collected separately for disposal according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: http://laserliner.com/info?an=AHE

References

• Info - Laserliner
• Info - Laserliner
• Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>