DENSO FN01230 Smart Key FOB Instructions
- June 6, 2024
- DENSO
Table of Contents
FN01230 Smart Key FOB
Instructions
Technical Document for Type Approval
For Smart Key FOB
TYPE: FN01230
DENSO KOREA ELECTRONICS CORPORATION
Mar. 16, 2021
Description of manufacturer
1.1 Trademark : N/A
1.2 Name and address of the manufacturer
-Name: DENSO KOREA CORPORATION
-Address: 3, Cheomdansaneop-ro, Masanhappo-gu, Chang-won-si,
Gyungsangnam-do, Korea, 51176
1.3 Name and address of the applicant
-Name: DENSO KOREA CORPORATION
-Address : 3, Cheomdansaneop-to, Masanhappo-gu, Chang-won-si,
Gyungsangnam-do, Korea, 51176
Technical description of Smart Key FOB
2.1. Type
– Model: ……………FN01200
2.2. Specifications of Electronic Key
– Nominal frequency: ………………………………….433.92MHz
– Oscillator frequency (IC clock) : …………………….16MHz
– Oscillator frequency (RF clock): ………………………………27.6MHz
– Type of modulation:……………………………… FSK/F1D
– Power Supply
– Nominal supply voltage: ……………………….3 VDC
– Type of Battery: ……………………………….One lithium battery
– Antenna:………………………………….. Built-in type (Fixed)
3. Outline of Smart Key FOB
Smart Key FOB is mainly used for locking or unlocking the doors of vehicles.
Smart Key FOB detects signals when it reaches the vicinity of vehicle, and
sends signals using radiofrequency. Also, Smart Key FOB sends a radio wave
signal while a button is pushed. When the button is released, the radio wave
signal is automatically off within 0.196 seconds. When the button is depressed
continuously, Smart Key FOB sends a signal for a predetermined constant time.
This product sends a signal when the following buttons are pushed.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that is
not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC and IC RF Radiation Exposure Statement:
This equipment complies with FCC and IC RF Radiation exposure limits set forth
for an uncontrolled environment. This device and its antenna must not be co-
located or operating in conjunction with any other antenna or transmitter.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>