JPL Agora 4K Ultra HD All-In-One Video Sound Bar User Manual

Agora 4K Ultra HD All-In-One
Video Sound Bar
User Manual

Packaging Contents

Please check the packaging contents carefully after receiving the products.

Appearance Display

Setting up your conferencing camera

Place your camera
Designed for the way you like to make a video call, Live, conference, etc. Place the Camera where you want it like on a computer monitor, desktop, wall, ceiling.
a. Put on top of the desk
b. Wall Mount
Drill holes on the wall that match the reserved position of the prod­uct bracket, and install the correspo­nding screws (note: the screws need to be purchased separately)
c. For placement on a monitor Unfold the stand of this product place it on your monitor, adjust the angle of the stand, close to the back of the monitor

Connect your camera
Connect the display screen to the product with a US B cable, plug, and play.

How to check the conferencing camera is connected

In the process of running the application, if you change the connector or settings, it may not be recognized immediately, please end the application once and start again.

Win 10

1. Start button, find the camera icon, and click it. If the screen normally plays back the images captured by the camera, the camera is successfully connected.
   

2. You can set the camera.
   

3. If there are multiple cameras or the camera is not displayed, please click to switch the camera.

Win 8

1. Start button, find the camera icon, and click it. If the screen normally plays back the images captured by the camera, the camera is successfully connected.

2. You can set the camera.

3. If there are multiple cameras or the camera is not displayed, please click to Mitch the camera.

Mac

1. Open the ‘photo booth’ and select the camera.
   

The preview screen will play the image taken by the camera.
If confirm the product connection is successful, you can make video calls, Live, conference, and video education on the popular video applications.

External Bluetooth Device Connection

1. To connect an external Bluetooth speaker/microphone, first, make sure the external Bluetooth is in the pairing status and at the same time, plug the MC2000S camera into PC, and then follow the below instruction(we take the Win10 system as an example): Switch on the Bluetooth button of the PC, then click to add the external speaker/microphone from the list till it is connected.
2. f the Bluetooth speaker cannot play PC audio (no sound) after connection, please follow the steps below: Place the mouse cursor on the speaker icon in the bottom right comer of the PC, then right-click to select “Sound”, and then in the “Play” list, Select the corresponding playback device, and then ‘Confirm”. When playing music normally, you can set “the Bluetooth speaker Model Name with a suffix as Setembro” as the default device, so that the sound quality of the music can be improved. But during the voice call, please set “the Bluetooth speaker Model Name with a suffix as Setembro” as the default communication device, otherwise it is possible that voice of the other party can not be heard.
3. If the Bluetooth microphone fails to record after connection (or the other party cannot hear the sound), please follow the steps below: Place the mouse cursor on the speaker icon in the bottom right corner of the PC, then right-click and select “Sound”, then select “Record”, in the playlist, select the connected Bluetooth microphone as the default device, and then “Confirm”.

Technical Information

• 4K Ultra HD Output
  Using a new generation 8 million effective pixels 1/2.8 inch high-quality FHD CMOS sensor can achieve the ma>imum 3840×2160 high-resolution quality image.

• Ultra-High Frame Rate
  MJ PEG and YUY2 output frame rate 4K/3Dfps 1920x1080P/30fps

• 4 MIC Array System
  4 Digital MIC Array, pickup voice up to 10 meters

• Auto Control Technology
  Automatic Echo Noise Reduction Control(AEC)
  Automatic Gain Control(AGC)
  Automatic Noise Reduction Control(ANC)

• Auto Light Correction
  Automatic Exposure (AE) Auto White Balance (AWB) Dynamic Black Level Calibration (ABLC)

• Multi Interfaces
  USB2.0, LINE IN, LINE OU1, Bluetooth

• Various application scenarios
  Business conference, video call, video recording, live streaming, teaching video, distance education, telemedicine system, etc.

Product Specification

Camera Parameters

Imaging Sensor| 4K 1/2.8 inch CMOS Sensor
Total Pixels| 8.3 million
Output Image Format| MJPEG and YUY2
Focal Length| f=2.52mm
Minimum illumination| 0.5Lux
Focus Mode| Fixed Focus
Image Color| 24Bit
Picture Adjustment| Brightness, chroma, saturation, contrast, sharpness
Field of view (Veitical)| 74′ (W)
Field of view (Horizontal)| 107° (W)
Field of view (Diagonal)| 116° (W)
Pan:
Tilt:
Zoom:| 0°
±15°
3X Digital zoom
AIC| Automatic Exposure (AE)
Aub White Balance (AWB)
Dynamic Black Level Calibration (ABEL)
Resolution| 3840/2160@30fps 19201 080@30(ps 280’720©30fps 640″480©30(ps
Interface| USB20, LINE IN, LINE OU1,13ketooth
Microphone Parameters
MIC Array Quantity| 4
MIC Array Form| linear
Microphone Spacing| 80 rnm
MIC Specification| Digital Microphone
SNR| 655dB
Sampling Rate| 16KHz/48KHz
Sensitivity| -26 dE3Fs
Far-field Pick Lc Voice Distance| 0-1 Orneters
Horizontal Voice Fick up Angle| Horizontal 180°
Conirrtinkation Mode| Full duplex
Speaker Parameters
Speaker Quantity| 2
Speaker Size| g40.0mm 28.0Hmm
Speaker Power| 3W2
Speaker Impedance| 40
Frequency Range| 20Hz-20KHz
Distortion| 5%Max
Storage Temperature| -25°C – +60`C
Bluetooth Parameters
Bluetooth Standard| Bluetooth ED R
Frequency| 2400 – 2480MHz
TX power| 4±1.5dBm(typical)
RX Sensitivity| -85dBrn (typical) Tr/4 DQPSK
Operating Systems| Windows; Linux; Andriol
Operating Distance| 10 meters
Other Parameters
DC| 12V
Working Current| c 2000rnA
Storage Temperature and Humidity| -10°C – +60°C/ 20% -95%
Working Temperature and Humidity| -10°C – +50°C/ 20% – 80%
Operating Environment| Indoor
System Requirements| Win2000/X P,Nista/Win7/Win8/Wi n10 Linux with UVC (above linux – 2.6.26)
MAC – OS X 10.4.8 or later Win CE with UVC
Android 4.0 or above with UVC
Site| L4005 x W92.8 x H81.2mm
Weight| 960g

Bluetooth Remote Controller User Manual

1. Turn off [ ]
   Single press to turn the video picture off/on (see picture l-1, 1-2)
   Long 3s press to turn on/off

2. Mute MIC
   Single Press to mute/open camera Mic

3. **Direction button

** Control direction movement of video picture

4. Microphone
   Long press without release to switch to the built-in MIC of the remote controller, release to switch to camera MIC

5. Menu
   Menu/Single press to turn on/off Al function

6. VOL+
   Single long press to increase the volume (Synchronize volume control on the PC side)

7. VOL-
   Single long-press to decrease volume (Synchronize volume control on the PC side)

8. Zoom+
   Single/long press to zoom+

9. Zoom-
   Single/long press to zoom-

10. Flymouse
    Single-click to open/close Airmouse
    [▲] Move up
    [▼] Move down
    [◀] Left-click
    [▶] Right-click

11. Page Up [ ] Page up

12. Page Down [ ] Page down

13. OK button [OK]
    Long press [OK] button to confirm or enter Reset

Buttons Combination(Press Step-by-Step)

• Long Press (S)Menu [ ] 5-second release. secondly press single/long-press any following button to set video picture effect thiralty press (13)[mq to  confirm and exit (6)VOL+ (7)VOL – : Archive brightness+/brightness- of camera (8)Zoom+ / (9)Zoom : Acheive conirast+/contrast of camera
  (1 1)Page Up [ ] (1 2) Page Down [ ] Acheive satuation +/ saturation of camera Press(3) ** :** to adjust mirror image in vertical arid horizontal.
  

• Press Page down [u ] first, and then press the direction button ****to move the image accordingly after magnifying the image. Buttons Combination(Press at Same Time)

• Long press (7) [VOL-] +(9)[Zoom-] at the same time (about 3s): Enter Pair Bluetooth

• Long press (13)[ OK ] +(11)Page Up[ ] lalat same time (about 3s): Clear Dongle Info

Camera signal Light Instruction

Long press menu button on the remote control to enter into setin§ Mule, piss OK button the flashlight will disappear| RA mil bite lightsfiash alternately
Long puss OK button 3s to Sesto enter RESET| Purple kilt flashes 3 tines

Some Suggestions

There are a few things we suggest for best performance

1. Do not sit in front of a window or other bright light source.
2. Having an uncluttered background will have your viewers concentrating on you.
3. The mounting system allows for tilting and aiming the camera. While sitting in your normal position, your entire face should be just above the middle of the picture. Tilt and move the camera to frame p a good view.
4. Visit your preferred video calling provider’s website for exact information on system and performance requirements.
5. To get a smoother video, especially at high resolution, we recommended a network speed above 2M/s.

Solution for Common Problems

• No reaction of Bluetooth remote controller
  1. Check if the remote controller is filled with battery or filled the battery correctly if there is no red led light appears when pressing any button on the remote  controller
  2. Repower MC2000 Camera and then press the VOL- and ZOOM- at the same time for 3s.

• Blue LED light flashes slowly on camera
  1. Cut off the power 3s and reconnect it.
  2. Press the” OK “+”Ei “button same time for 3s until the red lead on the remote controller turns off.
  3. Press Vol- + Zoom- together for 3s.

• Picture shows abnormal
  Press the “OK” button for 3-5s to enter Reset

• Pictures look vague
  Check if the lens is dirty

• Difficult connection with external Bluetooth speaker
  This often happens under the Bluetooth is abnormally unconnected or under windows 10 system which a driver is required.

• Microphone fails to record
  1. Check if MC2000 is the default recorder device by PC.
  2. Check if the mic was muted by the remote controller.

• PC fails to read this Camera
  1. Check if the ad pater is fully connected.
  2. Check if the USB cable is correctly connected.

• No image displayed
  1. Check if the USB port and USB cable of the terminal device is connected correctly.
  2. Check if the USB cable is stable.
  3. Check if the USB port can work normally.

• The image breaks frequently
  1. Check if the USB cable is stable.
  2. Check if the USB port and USB cable of the terminal device is connected correctly.

• The definition is not good after accessing software
  Check the software video input settings to see if the camera video input is set correctly.

Warranty and Service Information

This product is guaranteed for a period of one year from the date of purchase. Only product defects caused by its quality can be returned for repair or replacement. The returned product package shall be in its original package or package with an equal degree of protection. The following information must be presented to obtain Warranty Service:

a. the product
b. proof of purchase clearly indicates the date of purchase & product model;
c. reason for return.

This Warranty does not cover defects or damages that result from:
a. improper storage, misuse or abuse, accident or neglect such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse;
b. contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, hit or the like, extreme heat or food;
c. use of the product or accessories for commercial purposes or subjecting the product or accessories to abnormal usage or conditions;
d. other acts which are not the fault of the seller;
e. damage due to improper operation; products battery which has not been charged over six months.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>