dji OM 5 Mobile Phone Gimbal User Guide

DJI OM 5 Quick Start Guide
DJI OM 5 Overview

1. Magnetic Phone Clamp

2. Shutter/Record Button
   Press once to take photos or start/stop recording. Press and hold for burst shot.

3. Frame Adjustment Button
   Press once to switch between front and back cameras. Press twice to switch between landscape and portrait mode.

4. Battery Level Indicators
   Indicates the battery level of the gimbal.

5. 1/4”-20 UNC Screw Hole
   For mounting accessories such as a tripod.

6. System Status Indicator
   Indicates the status of the gimbal.

7.  Joystick
   Move vertically to tilt the mobile phone. Move horizontally to pan the mobile phone. Scroll the options when in quick menu.

8. Lanyard Hole

9. Zoom Slider
   Move the slider to the T position to enlarge the subject and move the slider to the W position to shrink.

10. Trigger
    Press and hold to enter lock mode, release to exit lock mode. Press once to start or stop ActiveTrack (requires enable ActiveTrack in DJI Mimo). Press twice to recenter the gimbal.
    When using ActiveTrack 3.0, the gimbal will recenter to the center of the camera view. Press once, and then press and hold to enter Sport mode, release to exit.

11. Power/M Button
    When Powered Off: Press once to check battery level. Press and hold until it beeps once to power on.
    When Powered On: Press once to switch between photo and video mode, or to bring out the quick menu. Press twice to enter/exit standby mode. Press four times to enter FPV mode. Press and hold to power off.

12. Pan Motor

13. Roll Motor

14. Tilt Motor

15. Charging Port (USB-C)

16. M3×0.5 Screw Hole

Charging

Charge the DJI OM 5 through the charging port (USB-C).

Attaching the Phone

1. Attach the magnetic phone clamp in the center of the phone.
2. Align the marks on the phone clamp and the mounting plate.
3. Attach the mobile phone to DJI OM 5.

DJI Mimo App

Mobile phone camera can be controlled by DJI OM 5 after connecting the mobile phone and DJI OM 5 via DJI Mimo, and more features can be used in DJI Mimo. Download the DJI Mimo app and make full use of the DJI OM 5.

https://m.dji.net/mimo

Specifications

Folded: 174.7 x 74.6 x 37 mm
Weight| 290 g (gimbal)
30 g (Magnetic phone clamp)
Power Consumption| 1.2 W (Steady and balanced status)
Max Controllable Speed| 120°/s
Wireless Mode| Bluetooth Low Energy 5.0
Transmission Power (EIRP)| ≤5 dbm
Operating Frequency| 2.400-2.4835 GHz
Battery Type| Li-Polymer
Capacity| 1000 mAh
Energy| 7.74 Wh
Voltage| 6-8.8 V
Charging Temperature| 5° to 40° C
Operating Temperature| 0° to 40° C
Charging Time| 1.5 hours
Operating Time| 6 hours (Under ideal conditions with the gimbal fully balanced)

CAUTION

• Risk of explosion if the battery is replaced by an incorrect type
• disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
• a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

FCC Compliance Notice
Supplier’s Declaration of Conformity
Product name: DJI OM 5
Model Number: OE100
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Compliance Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED.

EU Compliance Statement: SZ DJI OSMO TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive
2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com /euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

GB Compliance Statement: SZ DJI OSMO TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment
Regulations 2017.
A copy of the GB Declaration of Conformity is available online at www.dji.com /euro-compliance

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

References

• Anatel — Agência Nacional de Telecomunicações
• DJI - Official Website

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>