Contours ZY064 BRITAX V2 Infant Car Seat Adapter Instruction Manual
- October 27, 2023
- Contours
Table of Contents
Contours ZY064 BRITAX V2 Infant Car Seat Adapter
IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING
Your child’s safety depends on you. Proper product use cannot be assured
unless you follow these instructions.
How to Keep Your Child Safe While Using this Stroller Infant
Car Seat Adapter
- Adult assembly required.
- Never leave the child unattended. Accidents can happen quickly while your back is turned. You must always keep your child in view while your child is in the stroller, even when sleeping. Do not use this product as a bed. Your child may become tangled in straps or pads and suffocate.
- Ensure that all locking devices are engaged before use. This prevents injuries caused by stroller collapsing before allowing your child in or near the product.
- Parking brake shall be engaged when placing and removing the children from the product.
- Always set the wheel brakes when stroller is not moving, especially on an incline. This prevents the product from rolling away.
- Only use accessories and/or replacement parts supplied or recommended by the manufacturer.
- When using this product, to avoid serious injury from falling or sliding out, infant must always be secured in the infant car seat with the car seat harness. Refer to infant car seat instructions for proper adjustment.
- Make sure the stroller is fully unfolded and the car seat adapter is securely latched before attaching your infant car seat. This prevents finger pinching and injuries caused by stroller collapsing.
How to Use this Adapter with your Infant Car Seat
- To ensure your infant car seat is properly installed on the stroller, make sure it is:
- Tightly secured to the stroller.
- Only transport infants that are within the size and weight limitations of your infant car seat, as described in the instruction manual provided by the infant car seat manufacturer.
- If at any time your infant car seat does not secure properly to the stroller, or if you have questions about assembly or use of the stroller, DO NOT use this product. Call Contours at 1-888-226-4469 (US) or +31 548 659096 (EU).
- For a list of compatible infant car seats, visit ContoursBaby.com
PARTS LIST
ASSEMBLING ADAPTER
ATTACHING ADAPTER TO STROLLER
PREVIOUS MODELS
NEWER MODELS
ATTACHING INFANT CAR SEAT TO STROLLER
Models
- ZL033
Handle must be in lowest position when car seat is facing the caregiver.
REMOVE INFANT CAR SEAT FROM STROLLER 
REMOVE ADAPTER FROM STROLLER
CARE & MAINTENANCE
- Clean plastic and metal parts with a damp cloth and mild soap. Wipe dry.
- If adapter becomes wet, wipe with a soft cloth to prevent rusting on metal frame.
- When storing stroller, never stack other items on top of or in it; this may damage the stroller.
- Periodically check for worn parts, loose screws, or torn materials and stitching.
- Replace any damaged parts immediately.
Contours® – North America
1100 W Monroe St
Chicago, IL 60607
1-888-226-4469
[email protected]
Contours® – Europe
Windmolen 22
7609 NN Almelo
The Netherlands
+31 548 659096
[email protected]
References
Read User Manual Online (PDF format)
Loading......