SENA Latitude SX Smart Snow Helmet User Guide
- June 6, 2024
- Sena
Table of Contents
SENA Latitude SX Smart Snow Helmet
RIDE CONNECTED
Blast your favorite tunes, talk over the intercom with your buddies, all
through your helmet. With built-in Bluetooth® capabilities, HD speakers and a
microphone using Advanced Noise Control™, technology has never felt so minimal
or freeing.
GETTING STARTED
- This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT SENA.COM.
- Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit sena.com to see how to update your product.
- Users can follow Sena on Facebook, YouTube, Twitter and Instagram to receive the most up to date information on products, helpful tips and all other announcements regarding Sena products.
SENA Technologies, Inc.sena.com
Customer Support: support.sena.com
How to Use This Guide
The legend and callouts are here to help you read the illustrations. New
technology can be confusing, but we’ve created a simple way to perform actions
using illustrations.
Buttons
Product Details
How To
Fit the Helmet
For proper use, the helmet must sit level on the head and low on the forehead.
The helmet uses a simple, quick-release buckle system that, once adjusted, can
be buckled and unbuckled without changing the adjustment. For proper use, the
straps must be tight and evenly tensioned.
To properly wear your helmet:
- Position the helmet on your head with the front covering your forehead. If the helmet is tipped back and is not covering your forehead then the helmet is not in the proper position.
- Position the strap adjuster centered, just below your ears.
WARNING: Always wear the helmet in the proper position on your head with the front of the helmet covering your forehead for maximum protection. Never wear the helmet tipped back as the helmet will be in the improper position causing your forehead to be exposed. All fitment adjustments need to be made with the helmet in the proper position.
-
Position the helmet low on your forehead with the buckle under the chin and back against the throat. The straps should fit comfortably around both ears.
-
With the strap adjuster in the proper position, adjust the chinstrap tension at the buckle. Adjust the tension so the chinstrap is tight and comfortable by pulling the chinstrap end through the buckle to either tighten or loosen as needed.
-
After removing the “Chinstrap Pad”, secure the excess strap with “O-Ring” and then attach the “Chinstrap Pad” again.
-
Always wear the helmet with the chinstrap buckle fastened and the chinstrap pulled tight and positioned back against the throat. With the strap buckled and the helmet positioned, you should feel the chinstrap pull firmly against your chin as you open your mouth. When properly adjusted the helmet will wrap around your head and cradle it with firm, but comfortable pressure.
-
Try strapping your goggles on. If the helmet is on correctly you won’t be able to scratch your forehead.
WARNING: For maximum protection, this helmet must be fitted and attached properly to the wearer’s head in accordance with the following instructions. If after adjustment the helmet does not fit properly, do not use the helmet. Return it to the retailer or Sena.
Sena Outdoor App
By simply pairing your phone with your Bluetooth system, you can use the Sena Outdoor App for quicker and easier set up and management.
- App Features: Intercom, Music, FM Radio, Device settings, Quick Start Guide, and User’s Guide.
- Download
- Android: Google Play Store> ‘Sena Outdoor’
- iOS: App Store > ‘Sena Outdoor’
Sena Device Manager
The Sena Device Manager allows you to upgrade the firmware and configure its
settings directly from your PC or Apple computer. Download the Sena Device
Manager from sena.com.
Basic Operations
Checking the Battery Level
Visual Method is for when powering the Bluetooth system on.
Phone Pairing
There are two ways to pair the phone.
Pairing When the Latitude SX is Turned Off
Press and hold the (+) Button and (-) Button for 5 seconds when the Latitude
SX is turned off.
Pairing When the Latitude SX is Turned On
Press and hold the Sena Button for 10 seconds when the Latitude SX is turned
on.
Mobile Phone
Music Controls
Bluetooth Intercom
Up to three other people can be paired with the helmet for Bluetooth intercom conversations.
Intercom Pairing
There are two ways to pair the Bluetooth system.
Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom communication by
scanning the QR code on the Sena Outdoor App without remembering the button
operation.
-
Pair the mobile phone with the Bluetooth system.
-
Open the Sena Outdoor App.
-
Click the Smart Intercom Pairing Menu.
-
Click the Add Button to open the QR scanning screen.
-
Scan the QR code displayed on your friend (B)’s mobile phone.
Your friend (B) can display the QR code on the mobile phone by opening the Sena Outdoor App and clicking the Smart Intercom Pairing Menu. -
Click the Confirm Button and check that your friend (B) is paired with you (A) correctly.
-
Repeat steps 4-6 to pair with Intercom Friends (C) and (D).
Note: The Smart Intercom Pairing (SIP) is not compatible with Sena products that use Bluetooth 3.0 or below.
Using the Button
Note: Repeat the step above to pair with Intercom Friends C & D.
Two-Way Intercom
Radio
Troubleshooting
QUICK REFERENCE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>