CAT 272D3 Skid Steer Loader With Bucket Instruction Manual
- June 6, 2024
- CAT
Table of Contents
CAT® Radio Control 1:16 Scale 28007
Diecast Cat 272D3 Skid Steer Loader With Bucket, Auger, Forks, and Broom
OPERATING INSTRUCTIONS
- Power (On/Off)
- Stick
- Sound
- Bucket
- Reserved for future use
- forward/backward
- forward
- backward
Install batteries in machine
ITEM NUMBER:
28007
SCALE 1:16
Package includes: Skid Steer Loader, include 4 interchangeable work tools – bucket, auger, forks, and broom, Controller, USB cable, Two AAA batteries, Lithium battery, plastic fixed package window box
Product Information
| Frequency | 2.4 GHz |
|---|---|
| Maximum number of users/machines without interference | 12 |
| Controller Working Range | 15m/82ft |
| Max. speed (km/h) | 0.8 |
| Scale | 1/16 |
| Max. play time | 60 min. |
| Charging time | 180 min. |
| Charger | 1A, USB cable |
| Rechargeable Battery | 1 x 7.4V 600mAh 2S |
| Controller Battery | AAA size x2(not included) |
| Product Weight | 1.13 kg |
CAT official licensed product realistic full working functions (individual operability functions of bucket, screw, fork, broom), high qualty steel gears for durable life.
The wheelie bin symbol indicates the product and batteries must not be disposed of in domestic waste as they contain substances damaging to the environment and health. Please use collection points or recycling facilities.
Diecast Masters scale models are adult collectibles, not toys. Not intended for children under 14.
www.cat.com / www.caterpillar.com
©2021 Caterpillar. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Diecast Masters Company Limited, a licensee of Caterpillar Inc.
©2021Diecast Masters Company Limited
Room 1801-5,18/F
King Palace Plaza
52A Sha Tsui Road
Tsuen Wan, N.T., Hong Kong
www.diecastmastersamerica.com
BATTERY CHARGING INSTRUCTIONS
CHARGING METHODS
Connect the white port of Li-Po to USB charging port, as shown in the Figure, and ensure port can be connected tightly and correctly, then insert the USB charging plug into power adapter, and perform charging.
- Intelligent USB charger lead (Enclosed)
- (Charging permitted)
- (Charging forbidden) 7.4V 600mAh Li-Po
INDICATOR LIGHT STATUS AT THE TIME OF CHARGING:
Uncharged state: red light always lit
Charged state: Red light always lit + Green light flashes
Full charging state: Red and green light always lit
Charging period 2-3 hours
When the battery is fully charged, please remove the USB charger lead promptly
BATTERY/USB PARAMETERS
Battery specifications: 14500 7.4V 600mAh Li Po
Intelligent USB balance charger with overcharge protection
Input: 5.0V 1-2A
Output: 7.4V 1000mAh x2
Precautions Of Li-Po Batteries
- Battery can be charged only by originally configured USB charger lead.
- Be sure to charge with the white Big socket port, not the yellow socket.
- 7.4V Li-Po must be equipped with 5V USB charging plug.
- Any Li-Po battery with a damaged appearance should NOT be charged to avoid fire hazards from spontaneous combustion.
- The battery should be charged according to the specified charging time period.
Safe Usage Instructions for Li-Po Batteries
- Li-Po batteries pose a higher danger compared with other batteries.
- This company does not bear any responsibility resulting from improper usage.
- DO NOT attempt to charge the Li-Po battery with any charger other than the included original charger. Failure to do so may result in an explosion or fire. DO NOT dismantle, subject to impact, incinerate or reverse the connections of the battery. Avoid metal objects impacting the positive and negative polarities of the battery. Please prevent sharp objects from penetrating the battery to avoid the potential of fire.
- Please use caution when charging the battery and ensure charging occurs in a visible area. DO NOT leave battery unattended while charging.
- Battery should be kept out of reach of children to avoid any injury.
- A degraded battery should not be attempted to be recharged. Battery expansion, deformation, explosion or fire may occur.
- Degraded batteries should be disposed of properly following regional or national disposal guidelines to ensure protection of the environment.
WARNING
- This product contains small parts and is not intended for children under the age of 14.
- The remote control requires 2 X 1.5V AAA non – rechargeable batteries and the RC excavator requires a 7.4V 600mAh Li – Po battery (included)
- The RC excavator motor can generate heat and should not be touched to avoid possible burns.
- Periodically check the wire, plug, shell and other parts of the charger for wear or damage and discontinue use if detected until repaired or replaced.
- The RC excavator should only be charged using the recommended guidelines.
- The LEDs ( Light Emitting Diodes ) can emit radiation and should not be pointed directly at the eyes.
- Aviation restrictions forbid the use of Radio Control devices within a radius of ISED Warning(statement):
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science and Economic
Development Canada’s licence-exempt Rss(s). Operation is subject to the
following two Conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
For RF exposure：
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with unrestricted.
IMPROPER USE OF THIS PRODUCT
Do not dismantle, modify or otherwise alter the operation of this product in any manner. Do not operate this product in an unlawful or illegal manner or as to jeopardize the safety of the operator or others.
IMPORTANT NOTICES
Please note: This product has been manufactured under strict performance guidelines and tested to meet safety standards and requirements. This product is not intended for operators under the age of 14. The manufacturer bears no responsibility for injury or accidents resulting from the use of abnormal parts, excessive wear, improper assembly or operation. Please operate this product in a safe and responsible manner.
FUNCTION INTRODUCTION OF REMOTE CONTROL
Track Movements
- Reserved for future use
- Sound
- Bucket ascending
- Auger/Broom ascending
- Bucket descending
- Auger/ Broom descending
- Power switch
- Stick (Front arm) ascending
- Stick (Front arm) descending
- Right forward
- Left forward
- Left backward
- Right backward
INSTALLATION OF REMOTE-CONTROL MODEL BATTERY
Model is equipped with a 7.4V 600mAh Li-Po battery (included)First, twist the
buckle to open the battery cover, then correctly connect the battery following
the diagram.
Place the battery into the compartment. Close the battery cover and twist the
buckle to lock the cover.
- Power connection port
- 7.4 V 600mAh Li-Po Battery
- Battery compartment
- Battery cover
INSTALLATION OF REMOTE CONTROL BATTERY
The remote control requires 2 X 1.5V AAA non-rechargeable batteries.
Open the battery cover by loosening the cover screw. Place the batteries into
the compartment observing the correct polarity.
Replace the battery cover and tighten the cover screw.
Battery Installation Instructions:
- Remove rechargeable battery from package and install correctly in machine following included guidelines.
- The rechargeable battery should be removed from the machine before recharging.
- Recharge battery only under adult supervision.
- Do not use rechargeable AAA batteries in the remote control
- Do not combine old and new AAA batteries in the remote control
- Use the same type or brand of new AAA batteries in the remote control
- Place AAA batteries in the remote control observing the correct polarity
- Use caution to avoid short-circuit of the battery terminals in the remote control
DIGGING ARM AND PLATFORM CONTROL
Bucket descending
Bucket ascending
Front arm ascending
Front arm descending
MODEL DRIVING CONTROL
Forward (press and hold)
Backward (press and hold)
Left turn (press and hold the left forward rotation)
Right back (press and hold right back rotation)
Right turn (press and hold the right forward rotation)
Left back (press and hold left back rotation)
Infinite rotation to the left (press and hold at the same time)
Infinite rotation to the right (press and hold at the same time)
REPLACEMENT PARTS
1. First remove the bucket fixing screws (Image 1), detach the bucket (Image 2)
(Image 1) (Image 2)
2. Install the accessory on the forearm, insert the bolt on the nut and lock it. (The installation method of the two accessories is the same)
auger forks broom
3. Function
UP/Down Revolve Revolve
REMOTE CONTROL FREQUENCY PAIRING AND POWER ON
This product is equipped with a remote control with a frequency of 2.4GHz. When a user operates the product for the first time, please install batteries into the model and the remote control. Then power on the unit, then the remote control. A series of beeps will indicate that the frequency pairing has been completed and the model is ready to operate.
Model Power switch Remote control Power switch
LIGHT AND SOUND CONTROL
The operating model can generate lights and sounds.
Press the sound switch to turn on the lights and sounds, press the switch
again to turn them off.
We reserve the right to make technical and design-related changes
FCC statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may
cause undesired operation of the device.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.