EDIFIER TO-U2 Mini TWS Wireless Bluetooth Waterproof Earbuds User Manual

EDIFIER TO-U2 Mini TWS Wireless Bluetooth Waterproof Earbuds

For more information, please visit our website: www.edifier.com

@Edifierglobal
@Edifier_Global
@Edifier_Global

Model: EDF280004
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different from actual product.
If any difference is found, the actual product prevails.

Power ON/OFF

1. Power ON when the case is opened.
2. Power OFF when placed in the case and the case is closed.

Pairing

1. Power ON when the case is opened.
2. Press and hold the button on the case for 3s. The display will show ” ” icon.
3. Select “TO-U2 mini” in your device setting to connect.

1st Pairing

1. Power ON when the case is opened. The display will show ” ” icon.
2. Select “TO-U2 mini” in your device setting to connect.

Note: For subsequent use, the earbuds will auto-connect to device used last time.

Left & Right connection/Reset

1. Power ON when the case is opened.
2. Press 3 times the button on the case. The display will show ” ” icon.
3. After the earbuds are connected, The display will show ” ” icon.
4. Enter pairing mode.

Controls

Battery status & charging

Battery Status

1. Power ON when the case is opened.
2. Tap 1 time the button on the case. The display will first show the battery level of the charging case then the earbuds.

Charging Earbuds

1. Place the earbuds in the case for charging.

Charging case

1. Plug the charging case into a USB-C power supply.
2. The display will show the charging status for 5s.

Input: 5V 200mA(Earbuds)
5V 1A(Charging case)

Note:

1. Please do not charge the product when there is sweat or other liquids inside the charging port, which may damage the product.
2. Images are for illustrative purposes only and may differ from the actual product.

Icons Description

Open the case

|

Close the case

|

Place earbuds in the case

|

Bluetooth pairing

|

Left & Right connecting

|

Pairing successful

|

Pairing failed

|

Charging case battery

|

Earbuds battery

|

Low battery

|

Charging

|

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   IC statement: CAN ICES-3(B)/NMB-3(B).
   FCC ID: Z9G-EDF165
   IC: 10004A-EDF165

Declaration for EU

• Frequency Band: 2400Mhz – 2483.5Mhz
• RF Power Output: ≤12 dBm (EIRP)
• There is no restriction of use.
• 210-173819
• Input: 5V 200mA(Earbuds)
• 5V 1A(Charging case)

Hereby, Edifier International Limited declares that the radio equipment type
EDF280004 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address: https://www.edifier.com/int/eu-doc.html

FCC Regulatory Compliance
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISED Regulatory compliance
This device contains license-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

References

• Headphones, Speakers | A Passion for Sound -【Edifier】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>