TAOTRONICS TT-SK025 Soundbar User Guide
- June 6, 2024
- TaoTronics
Table of Contents
TAOTRONICS TT-SK025 Soundbar
Product Diagram
Front
-
Speaker
-
LED Indicator Rear Panel
-
Power Port
-
AUX Input
-
Mount Holes
Note: The mounting screws are not provided.
Side -
Volume –
-
Mode Button
-
Volume +
-
Power Button
-
Play / Pause
Package Contents
- 1 x TaoTronics Sound Bar (Model: TT-SK025)
- 1 x Power Adapter*
- 1 x AUX Cable
- 1 x User Guide
- 1 x Thank You Card
Note: Power adapter types varied by region
Button Control
Function | Operation |
---|---|
Power On / Off | Press and hold the Power Button until a beep |
is heard.
Volume +| Press the Volume + button
Next Track| Press and hold the Volume + button under the
Bluetooth mode
Volume –| Press the Volume – button
Previous Track| Press and hold the Volume – button under the
Bluetooth mode
Switch to Bluetooth
/ AUX Mode
| Press the Mode Button to switch between the
Bluetooth and AUX mode.
Play / Pause| Press the Play / Pause button
Mute
(only under AUX mode)
| Press the Play / Pause button to mute /
unmute
LED Indication
Operations | LED Status |
---|---|
Power on | Light up blue / green. |
Bluetooth Connection | Pairing |
Connected
| Stays solid blue during playing;
Blinks blue slowly when no audio input
AUX Connection| Stays solid green during playing;
Blinks green slowly when no audio input
How to Use
Bluetooth Connection
- Plug the soundbar to power, press and hold the Power Button until a beep is heard. The device is in Bluetooth mode initially.
- When the indicator starts to flash fast, activate the Bluetooth function on your device and search for devices nearby.
- Find “TaoTronics TT-SK025” in the search results and tap to connect.
- A beep will be heard and the indicator will turn solid blue upon a successful connection.
Notes:
- When it’s powered on, the soundbar will automatically connect to the device last paired if any. Otherwise, it’ll enter the pairing mode with the LED indicator blinking fast.
- To change the connection, press and hold the Play / Pause button to enter the pairing mode and connect to another device.
AUX Cable Connection
- Press the Mode Button to switch to AUX mode.
- Plug in the AUX cable into the AUX Input port at the back.
- Connect to an AUX device via the cable.
Note: Buttons on the sound bar do not work under the AUX mode, except that pressing the Play / Pause button can mute/unmute.
FCC Rules
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and(2) this device must
accept any interference received, including interference that may cause
undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to
promote the sustainable reuse of material resources. Household users should
contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes
for disposal.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>