MIXX AX1 On-Ear Noise Cancelling Wireless Headphones User Guide
- June 6, 2024
- MIXX
Table of Contents
MIXX AX1 On-Ear Noise Cancelling Wireless Headphones
What’s in the box?
MIXX AX1 On-Ear Noise Cancelling Wireless Headphones
Travel Friendly
For ease of storage while travelling, swing the MIXX AX1 ear pads up
towards the headband. Then you can just pop them in your bag.
LET’S START
- ANC LED Indicator Light
- ANC Switch
- Multi-function Button
- Volume Up / Previous Track Button
- Volume Down / Skip Track Button
- Micro USB Charging Port
- LED Indicator Light
- 3.5mm Audio Port
- Microphone
- Tilt Arm
LET’S CONNECT
First time pairing
- Press and hold the Multi-function Button 3 to power on your MIXX AX1 wireless headphones until you hear ‘Power on’.
- The headphones will enter pairing mode this will be confirmed with ‘Pairing’ and the LED Indicator Light will flash WHITE.
- Go to the Bluetooth settings on your audio device to select ‘MIXX AX1’ from the list.
- The headphones have paired successfully once you hear the word ‘Connected’ and the LED Indicator Light remains a solid WHITE.
- You can now enjoy your music, watch a video or take a call hands free.
- Once the initial pairing is complete, your AX1 headphones will automatically reconnect to the last audio device it was paired to and will confirm with ‘Power on, connected’.
- If there is no Bluetooth connection after 5 minutes the headphones will automatically turn off and then confirms with ‘Power off’.
LET’S USE ACTIVE NOISE CANCELLING (ANC)
How ANC works?
The innovative technology inside these noise cancelling wireless headphones
monitors the ambient background noise around you and reverses the sound wave
to cancel out that surrounding noise. This creates a much quieter listening
environment.
Using ANC
Slide up the ANC Switch 2 to tune out any unwanted sounds or ambient noise
while making your music or video sound better.
The ANC LED Indicator Light 1 will glow GREEN when the ANC is on.
You can use ANC to reduce the sound of an engine on a plane, train or in a
noisy office or home environment.
The ANC LED Indicator Light 1 will turn off when you slide down the ANC Switch
2 to power it off. Remember, to switch off the ANC when you are no longer
using your headphones.
LET’S STAY CHARGED
Connect the headphones to a suitable USB wall charger, a computer USB port or
a power bank using the micro USB charging cable supplied.
The Micro USB Charging Port 6 can be found at the bottom of the right ear pad.
Connect the micro USB charging cable to this port and the other cable end to a
suitable power source.
While charging, the LED Indicator Light 7 will shine RED.
Once the headphones are fully charged, the LED Indicator Light 7 will turn
BLUE. This can take between 1 and 2 hours.
LET’S GO WIRED
The MIXX AX1 headphones are suitable for devices with a 3.5mm audio socket.
The 3.5mm audio cable supplied provides the flexibility to convert from
wireless headphones to wired use. Convenient when watching movies on a plane
or when there is no Bluetooth connection.
Insert the 3.5mm audio cable into the 3.5mm Audio Port 8 of your AX1 headphones and the other end into your phone or plane’s 3.5mm audio socket to start listening to your music or movie.
LET’S PLAY
First Time Pairing
Press and hold the START Button until you hear the words ‘Power on’ and
‘Pairing’.
Go to the Bluetooth settings on your phone and select ‘MIXX AX1’ from the list. Once paired successfully with your device, you will hear ‘Connected’.
NEED EXTRA HELP?
Common solutions
If you are experiencing problems with your headphones:
- Power on the headphones (see Let’s play section).
- Check the status on the LED Indicator Light (see Let’s stay charged section).
- Charge the headphones (see Let’s stay charged section).
- Move your device closer to the headphones and away from any obstructions or interference.
- Unpair or “forget” the headphones from your current device and pair to another Bluetooth audio device.
Questions and Answers
Q. How do I know if the ANC is working?
A. Ensure the ANC Switch is on (see Let’s play section) and the ANC LED
Indicator Light is GREEN. You should notice more emphasis and clarity in your
sound and less background noise.
CONTACT MIXX
Feedback is welcome simply email us on support@mixx-io.com or visit mixxaudio.com for more
information.
LET’S VIEW TECHNICAL SPECS
Bluetooth: 5.0
Wireless range: 10m
Dynamic driver: 40mm
Frequency: 20Hz – 20KHz
Battery capacity: 600mAh
Charging time: Approx. 3 hours
Play time (via Bluetooth): Up to 20 hours
Play time (via Bluetooth & ANC): Up to 15 hours
Weight: 241g
Compatibility
Suitable for most smartphones, tablets, notebooks or laptops with Bluetooth
audio support or a 3.5mm socket.
LET’S BE SAFE
It’s important that you read this section completely, especially the ‘Warning and Safe Usage’ instructions.
For your protection
- Please keep the product out of reach from children and animals.
- Do not listen to loud music for a long duration of time.
- Adjust the volume to a comfortable level before listening.
- Do not use headphones while operating machinery, including cars.
- Do not use in areas where the use of hearing is required for safety.
- Do not drop, short circuit, disassemble or continue to use this product if damaged.
We recommend
To refer all servicing to qualified persons. Servicing may be required when
the product has been damaged in any way, does not operate normally or has been
dropped.
The operating temperature range for this product is 5º – 40º Celsius.
WARNING: The headphones and the micro USB charging cable connectors are
not water resistant and should not be exposed to rain, moisture, any splashing
or liquid spills.
This may cause excessive heat and may lead to fire damage or personal injury.
CAUTION: This product contains a Lithium battery. Incorrect disposal of this battery may result in an explosion.
LET’S RECYCLE
This product can be recycled.
Products bearing this symbol must NOT be thrown away with normal household
waste.
Take the product to a collection point designated for recycling of electronic
devices.
Find out more about return and collection points through your local authority.
SAFE USAGE INFORMATION
Do not crush, puncture or incinerate the headphones. Only use certified or
device manufacturer’s cable.
support@mixx-io.com
mixxaudio.com