MIXX 2AXJ7-CHROMA3 StreamBuds Colour Chroma 2 True Wireless Earbuds User Guide

MIXX 2AXJ7-CHROMA3 StreamBuds Color Chroma 2 True Wireless Earbuds

Product Information

Specifications

• Model: MIXX ColourChroma 3
• Charging Port: USB C
• Quick Charge Feature: Yes
• Voice Assistant Compatibility: Siri, Google Assistant
• Recycling Information: Product can be recycled
• FCC Compliance: Part 15

Product Usage Instructions

Charging the Earbuds and Case

To charge the earbuds and case:

1. Place the earbuds into the charging case.
2. Connect the charging case to a power source using the provided USB-C cable.
3. The charge light indicator will blink RED when the case is charging.
4. For a quick charge, 15 minutes of charging provides 2 hours of additional playtime.

Pairing the Earbuds

To pair the earbuds:

1. Remove both earbuds from the Portable Charging Case.
2. They should automatically pair together; If not, tap each earbud 4 times to reset and try again.
3. Select ‘MIXX ColourChroma 3’ from your device’s Bluetooth settings to complete pairing.

Using Voice Assistants

To use Siri or Google Assistant:

1. Triple tap either Touch Sensor to activate Siri or Google Assistant.
2. You will hear a confirmation sound, then you can ask questions or give commands.

Safety Precautions

It is important to read and follow these safety guidelines:

1. Consult with your doctor before using the earbuds if you have a pacemaker or medical device.

FAQ

• Q: How do I know if the earbuds are fully charged?
• A: The charge light indicator on the case will turn solid green when the earbuds are fully charged.
• Q: Can I use only one earbud at a time?
• A: Yes, you can use either earbud independently by removing just one from the charging case.
• Q: How do I reset the earbuds?
• A: Tap each earbud four times to reset them if they are not pairing correctly.

LET’S STAY CHARGED

Note: If your earbuds and charge case do not have any power when you first unpack them, place the earbuds into the charge case and plug the charge case into a USB port using the USB C cable [8] provided.

The Earbuds

• A voice prompt “Battery low” allows for 2 minutes of playtime before the earbud(s) powers down stating “Battery low, power off”. The Earbuds LED Light [2] wil flash WHITE once and will then switch off. Charge the earbuds using the Portable Charging Case [5].
• While charging, each Earbud LED Light [2] wil be WHITE and once fully charged the LED Lights will turn off. Secure the earbuds by closing the lid.
• When the earbuds are placed inside the case and the lid is closed, the charge indicator light [7] will glow green for 4 seconds to show it is charging and then turn off.

TIP: 15 MINUTE QUICK CHARGE
If you’re running low on power, charge your earbuds in the case for 15 minutes and get 2 hours of extra playtime while on the go.

The Portable Charging Case

• Always connect the case via the USB C port [6] , to a suitable USB wall charger, computer USB port or a power bank using the USB C charging cable [8] supplied. Plug the supplied cable into the USB C port [6] on the charge case.
• The charge light indicator [7] will blink RED, on and off, to show the case is charging.

LET’S CONNECT

First time pairing

• Remove both earbuds from the Portable Charging Case [5]. They will automatically dual pair together; a voice will prompt
• “Power on, pairing” and a ‘Beep’ will sound. One of the Earbud LED Lights [2] will flash WHITE to indicate pairing mode. If the earbuds do not automatically dual pair together, tap each earbud 4 times to power off and then place them both back into the case. Remove the earbuds and they should automatically dual pair together. Go to the Bluetooth settings on your audio device and select ‘MIXX
• ColourChroma 3’ from the list. Once paired successfully you will hear “Connected” and the Earbud LED Light [2] will turn off. You can now enjoy your music, watch a video or take a call hands-free.
• The earbuds will automatically reconnect to the last device they were paired with, confirming “Connected”.
• Placing both earbuds back in the Portable Charging Case [5] and closing the lid will power them off. (note – if the earbuds do not turn off, the battery in your charging case needs to be recharged – see ‘Let’s Stay Charged.’

LET’S PLAY

Power on

• Remove both earbuds from the case. They will automatically turn on and dual pair together. A voice prompt will state “Connected” as confirmation. To manually turn on, long press each Touch Sensor for 3 seconds.

Power off

• Place both earbuds in the case and close the lid. This will automatically turn off the earbuds and the Bluetooth.

Play / Pause

• Double tap either Touch Sensor [1] or [3]

Increase Volume

• Single tap RIGHT Touch Sensor [3]

Decrease Volume

• Single tap LEFT Touch Sensor [1]

Previous Track

• Tap and hold LEFT Touch Sensor [1]

Skip Track

• Tap and hold the RIGHT Touch Sensor [3]

Answer / End Call

• Double tap either Touch Sensor [1] or [3] . (Audio is picked up via the microphones [4].

LET’S ASK GOOGLE

ASSISTANT / SIRI

• Triple tap either Touch Sensor [1] or [3] to activate Siri or Google Assistant. Your Voice Assist familiar ‘Beep’ will sound to confirm a connection. You can now ask Siri or Google Assistant a question or state a command.

LET’S RECYCLE

• This product can be recycled.
• Products bearing this symbol must NOT be thrown away with normal household waste.
• Take the product to a collection point designated for recycling of electronic devices.
• Find out more about return and collection points through your local authority.

FCC STATEMENT

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

LET’S BE SAFE
IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.

For your protection

• Check with your doctor before use if you are fitted with a medical device such as a pacemaker or a programmable shunt.
• Ensure the product is correctly connected using the manufacturer’s original accessories included with the product.
• Do NOT make unauthorized alterations to this product.
• Product may contain small parts which can be a choking hazard. Please keep the product out of reach of children under 6 and animals.
• Whilst this product has been made using hypo-allergenic materials, you may suffer some skin irritation after prolonged use.
• Do NOT listen to loud music for a long duration of time. We recommend turning the volume down before placing the device in your ears to avoid hearing damage.
• Do NOT use the product while operating machinery, including cars, trucks or other vehicles.
• Do NOT use noise cancelling mode or use your device in areas where the use of hearing is required for safety. e.g., while riding a bicycle, at a construction site or railroad etc.
• Clean only with a dry cloth – Wipe off sweat from the earbuds and the charging case before charging.

IMPORTANT!
Do NOT use a non-certified PD or QC3 wall charger as this may damage the product. Only use the cable supplied to charge your device.
If your product has become damaged in any way, does not operate normally or has been dropped, please refer to a qualified person to have the product checked before continuing to use it.

WARNING

• This product contains a Lithium battery. Incorrect disposal of this battery may result in an explosion.
• The operating temperature range for this product is 5º – 40º Celsius.
• Please avoid exposing the product, charging case and cable connectors to prolonged rain, moisture, or liquid spills/splashing.
• Please remove your device from your ears immediately if they emit any loud unusual noise or you experience a warming sensation.
• If you experience any of the issues listed above, please turn off your device and contact MIXX Ltd at support@mixx-io.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>