MIXX HTG01 StreamBuds Colour Chroma 3 User Guide
- October 30, 2023
- MIXX
Table of Contents
QUICK START GUIDE
LET’S STAY CHARGED
Note: If your earbuds and charge case do not have any power when you first unpack them, place the earbuds into the charge case and plug the charge case into a USB port using the USB C cable [8] provided.
The Earbuds
A voice prompt “Battery low” allows for 2 minutes play time before the
earbud(2) powers down stating “Battery low, power off”. The Earbuds LED Light
[5] will flash WHITE once and will then switch off. Charge the earbuds using
the Portable Charging Case [5].
While charging, each Earbud LED Light [2] will be WHITE and once fully charged
the LED Lights will turn off. Secure the earbuds by closing the lid. When the
earbuds are placed inside the case and the lid is closed, the charge indicator
light (7) will glow green for 4 seconds to show it is charging and then turn
off.
TIP: 15 MINUTE QUICK CHARGE
If you’re running low on power, charge your earbuds in the case for 15 minutes
and get 2 hours extra play time while on the go
The Portable Charging Case
Always connect the case via the USB C port [6] , to a suitable USB wall
charger, computer USB port or a power bank using the USB C charging cable (8)
supplied. Plug the supplied cable into the USB C port [6] on the charge case.
The charge light indicator (7) will blink RED, on and off, to show the case is
charging.
LET’S CONNECT
First time pairing
Remove both earbuds from the Portable Charging Case [5] .
They will automatically dual pair together; a voice will prompt “Power on,
pairing” and a ‘Beep’ will sound. One of the Earbud LED Lights [2] will flash
WHITE to indicate pairing mode. If the earbuds do not automatically dual pair
together, tap each earbud
4 times to power off and then place them both back into the case. Remove the
earbuds and they should automatically dual pair together.
Go to the Bluetooth settings on your audio device and select ‘MIXX Color
Chroma 3’ from the list. Once paired successfully you will hear “Connected”
and the Earbud LED Light [2] will turn off.
You can now enjoy your music, watch a video or take a call hands free.
The earbuds will automatically reconnect to the last device they were paired
with, confirming “Connected”.
Placing both earbuds back in the Portable Charging Case (5) and closing the
lid will power them off. (note – if the earbuds do not turn off, the battery
in your charging case needs to be recharged – see ‘Let’s Stay Charged.’
LET’S PLA
Power on
Remove both earbuds from the case. They will automatically turn on and dual
pair together. A voice prompt will state “Connected” as confirmation. To
manually turn on, long press each Touch Sensor for 3 seconds.
Power off
Place both earbuds in the case and close the lid. This will automatically turn
off the earbuds and the Bluetooth.
Play / Pause
Double tap either Touch Sensor [1] or [3] Increase Volume
Single tap RIGHT Touch Sensor [3] Decrease Volume
Single tap LEFT Touch Sensor [1] Previous Track
Tap and hold LEFT Touch Sensor [1] Skip Track
Tap and hold RIGHT Touch Sensor [3] Answer / End Call
Double tap either Touch Sensor [1] or [3] .
(Audio is picked up via the microphones [4] .)
LET’S ASK GOOGLE ASSISTANT / SIRI
Triple tap either Touch Sensor [1] or [3] to activate Siri or Google
Assistant.
Your Voice Assist familiar ‘Beep’ will sound to confirm connection. You can
now ask Siri or Google Assistant a question or state a command.
LET’S RECYCLE
This product can be recycled.
Products bearing this symbol **** must NOT be thrown away with normal
household waste.
Take the product to a collection point designated for recycling of electronic
devices.
Find out more about return and collection points through your local authority.
LET’S BE SAFE
IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.
For your protection
Check with your doctor before use if you are fitted with a medical device
such as a pacemaker or a programmable shunt.
Ensure the product is correctly connected using the manufacturer’s original
accessories included with the product.
Do NOT make unauthorized alterations to this product.
Product may contain small parts which can be a choking hazard.
Please keep the product out of reach from children under 6 and animals.
Whilst this product has been made using hypo-allergenic materials, you may
suffer some skin irritation after prolonged use.
Do NOT listen to loud music for a long duration of time. We recommend turning
the volume down before placing the device in your ears to avoid hearing
damage.
Do NOT use the product while operating machinery, including cars, trucks or
other vehicles.
Do NOT use noise cancelling mode or use your device in areas where the use of
hearing is required for safety. e.g., while riding a bicycle, at a
construction site or railroad etc.
Clean only with a dry cloth – Wipe off sweat from the earbuds and the charging
case before charging.
IMPORTANT!
Do NOT use a non-certified PD or QC3 wall charger as this may damage the
product. Only use the cable supplied to charge your device.
If your product has become damaged in any way, does not operate normally or
has been dropped, please refer to a qualified person to have the product
checked before continuing to use it.
WARNING:
This product contains a Lithium battery. Incorrect disposal of this battery
may result in an explosion. The operating temperature range for this product
is 5º – 40º Celsius.
Please avoid exposing the product, charging case and cable connectors to
prolonged rain, moisture, or liquid spills/splashing.
Please remove your device from your ears immediately if they emit any loud
unusual noise or you experience a warming sensation.
If you experience any of the issues listed above, please turn off your device
and contact MIXX Ltd on support@mixx-io.com
SCATOLA RACCOLTA CARTA
Documents / Resources
| MIXX
HTG01 StreamBuds Colour Chroma
3
[pdf] User Guide
HTG01 StreamBuds Colour Chroma 3, HTG01, StreamBuds Colour Chroma 3, Colour
Chroma 3, Chroma 3
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>