MIXX UltraDot In Ear True Wireless Earbuds User Guide
- May 15, 2024
- MIXX
Table of Contents
StreamBuds® Ultra
TRUE WIRELESS EARBUDS
QUICK START GUIDE
IMPORTANT!
LET’S STAY CHARGED
Note: If your earbuds and charge case do not have any power when you first
unpack them, place the earbuds into the charge case and plug the charge case
into a USB port using the USB C cable 8provided.
The Earbuds
A voice prompt “Battery low” allows for 2 minutes play time before the
earbud(s) powers down stating “Battery low, power off”. The Earbuds LED Light
[2] will flash WHITE once and will then switch off. Charge the earbuds using
the Portable Charging Case [5] .
Each LEFT and RIGHT earbud has 4-line LED Charge Indicators L and R on the
case.
Place the earbuds in the case and close the lid to charge.
The 4 LED indicators L and R will flash to show that the earbuds are charging
for 15 seconds and then will turn off.
The Portable Charging Case
To check the battery status of the case, open the lid of the Portable
Charging Case [5] . The LED Digital Display [6] will show the percentage of
the battery remaining for 15 seconds.
With a Type C charging cable
Always connect the case to a suitable USB wall charger, computer USB port
or a power bank using the USB Type C charging cable [7] supplied. Plug the
supplied cable into the USB C port [8] on the charge case.
When the LED Digital Display number reaches 100 (i.e., 100%) the case is fully
charged, and the display will switch off.
Charging the case may take up to 2 hours.
TIP: 15 MINUTE QUICK CHARGE
If you’re running low on power, charge your earbuds in the case for 15 minutes
and get 2 hours extra play time while on the go
LET’S CONNECT
First time pairing
When you open the Portable Charging Case [5] both earbuds will turn on and
connect together. A voice prompt will confirm with ‘Power on, pairing’. One
Earbud LED Light [2] will flash WHITE to indicate pairing mode.
Go to the Bluetooth settings on your audio device to select ‘MIXX StreamBuds
Ultra’ from the list. Once paired successfully you will hear ‘Connected’ and
the Earbud LED Lights [2] will turn off.
You can now enjoy your music, watch a video or take a call hands free. The
earbuds will automatically reconnect to the last device they were paired with,
confirming ‘Connected’.
FACTORY RESET
When in pairing mode, independently ‘tap’ 4 times until power off is
announced, return bud to case. repeat with other bud. This will complete the
Factory Reset process.
LET’S PLAY
Power on
Remove both earbuds from the case. They will automatically turn on and dual
pair together. A voice prompt will state “Connected” as confirmation. To
manually turn on, long press each Touch Sensor [1] and [3] for 3 seconds.
Power off
Place both earbuds in the case. This will automatically turn off the earbuds
and the Bluetooth.
Play / Pause
Tap and hold either Touch Sensor [1] or [3] Increase Volume
Single tap RIGHT Touch Sensor [3] Decrease Volume
Single tap LEFT Touch Sensor [1] Previous Track
Double tap LEFT Touch Sensor [1] Skip Track
Double tap RIGHT Touch Sensor [3] Answer / End Call
Tap and hold either Touch Sensor [1] or [3] (Audio is picked up via the
microphones [4] .
You can customise your earbuds using the MIXX control app, see page 4 for
further details
LET’S ASK GOOGLE ASSISTANT / SIRI
To activate Siri or Google Assistant, please use the MIXX Control app.
Your Voice Assist familiar ‘Beep’ will sound to confirm connection.
You can now ask Siri or Google Assistant a question or state a command.
LET’S INSTALL THE APP
Scan the QR code here to download the free MIXX Control app
Follow the on-screen instructions to create an account
Follow the on-screen instructions to connect to your earphones
HOW TO CUSTOMISE YOUR EARBUDS USING THE APP
Scan the QR code here to view our online tutorials (www.mixx- audio.com/pages/XXX) for instructions on how to customise your earbud settings.
LET’S BE SAFE
IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.
For your protection
Check with your doctor before use if you are fitted with a medical device such
as a pacemaker or a programmable shunt.
Ensure the product is correctly connected using the manufacturer’s original
accessories included with the product.
Do NOT make unauthorized alterations to this product.
Product may contain small parts which can be a choking hazard.
Please keep the product out of reach from children under 6 and animals.
Whilst this product has been made using hypo-allergenic materials, you may
suffer some skin irritation after prolonged use.
Do NOT listen to loud music for a long duration of time. We recommend turning
the volume down before placing the device in your ears to avoid hearing
damage.
Do NOT use the product while operating machinery, including cars, trucks or
other vehicles.
Do NOT use noise cancelling mode or use your device in areas where the use of
hearing is required for safety. e.g., while riding a bicycle, at a
construction site or railroad etc.
Clean only with a dry cloth – Wipe off sweat from the earbuds and the charging
case before charging.
IMPORTANT!
Do NOT use a non-certified PD or QC3 wall charger as this may damage the
product. Only use the cable supplied to charge your device.
If your product has become damaged in any way, does not operate normally or
has been dropped, please refer to a qualified person to have the product
checked before continuing to use it.
WARNING:
This product contains a Lithium battery. Incorrect disposal of this battery
may result in an explosion.
The operating temperature range for this product is 5º – 40º celsius.
Please avoid exposing the product, charging case and cable connectors to
prolonged rain, moisture, or liquid spills/splashing.
Please remove your device from your ears immediately if they emit any loud
unusual noise or you experience a warming sensation.
If you experience any of the issues listed above, please turn off your device
and contact MIXX Ltd on support@mixx-io.com
LET’S RECYCLE
This product can be recycled. Products bearing this symbol must NOT be thrown
away with normal household waste.
Take the product to a collection point designated for recycling of electronic
devices. Find out more about return and collection points through your local
authority.
THANKS!
Thanks for choosing our MIXX StreamBuds Ultra. All of our products come with a 2 year warranty for peace of mind. Feedback is welcome, email us on support @mixx-io.com for any comments or queries.
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this product not authorized by Mixx could void the
electromagnetic compatibility (EMC) and wireless compliance and negate your
authority to operate the product.
This product has demonstrated EMC compliance under conditions that included
the use of compliant peripheral devices and shielded cables between system
components. It is important that you use compliant peripheral devices and
shielded cables between system components to reduce the possibility of causing
interference to radios, televisions, and other electronic devices. Responsible
Party (contact for matters relating to FCC only):
FCC US Agent LLC
3722 Illinois Avenue
Saint Charles, IL
60174
USA.
FCC ID: 2AXJ7-ULTRADOTS
FCC ID: 2AXJ7-ULTRAHYBRID
FCC ID: 2AXJ7-ULTRAMINI
When first taking your earbuds out of the packaging, please remove protective film covering the charge points.
| |
---|---|---
support@mixx-io.com
mixxaudio.com
MIXX Limited
5 The Pavilions, Brighton Road, Pease Pottage,
West Sussex, RH11 9BJ. United Kingdom
Documents / Resources
| MIXX
UltraDot In Ear True Wireless
Earbuds
[pdf] User Guide
UltraDot, UltraDot In Ear True Wireless Earbuds, In Ear True Wireless Earbuds,
True Wireless Earbuds, Wireless Earbuds, Earbuds
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>