imoo E2001AO Kids Wireless Headphones with Microphone User Manual

imoo E2001AO Kids Wireless Headphones with Microphone

Wearing Instructions

Please wear the headset as shown in the picture below.

• Remark: please do not put the sound-producing unit into your ears.

Device Layout

1. On/Off
2. Indicator Light
3. Micro USB

Package Contents

1. Ear-care Headset ×1
2. Manual & Warranty Card ×1
3. Charging Cable ×1
4. Certification Related Information ×1

Connection & Use

Bluetooth Connection

1. When pairing with the device for the first time, press the On/ Off button for 7 seconds on the headset, the blue light will light up and flash, and the headset enters the pairing state.
2. Turn on your device’s Bluetooth, find and pair with the discoverable device “imoo Headset”. When the pairing succeeds, the blue light of the headset will flash for every 3 seconds.

Automatic Reconnection

1. Press the On/Off button for 2 seconds to power on and the headset will automatically connect to the last connected Bluetooth device (If fails, the headset will enter the pairing state).
2. If your device is within the headset’s Bluetooth working scope, it will automatically reconnect. (When your device is out of the headset’s Bluetooth working scope:
3. The connection will fail, and it will reconnect automatically only after your device is within its working scope;
4. When your device is out of the headset’s Bluetooth working scope for too long, the headset will power off automatically and the automatic reconnection fails.)

Disconnection

• Turn off your device’s Bluetooth to disconnect, and the headset will automatically enter the pairing mode.

Use of On/Off Button

Power On

• Press the On/Off button for 2 seconds until the blue light is on.

Power Off

• Press the On/Off button for 2 seconds in the power-on state, and the red light will light up for 1 second and then goes off, and the headset is powered off.

Answer Calls

• When there is a call, press the On/Off button to answer the call.

Hang Up

• Press the On/Off button to hang up during the call.

Reject Calls

• When there is a call, press the On/Off button for 2 seconds to reject the call.

Play/Pause

• Press the On/Off button to start playing music when the music is paused.
• When playing music, press the On/Off button to pause.

Specifications

Model: E2001AO

Bluetooth: Bluetooth 5.0

Bluetooth Working Frequency: 2400-2483.5MHz

Effective Range of Bluetooth: 10m

Audio Distribution: SBC/AAC coding

Battery: 3.8V/185mAh

Frequency Response Range: 20Hz-20KHz

Available for: About 8 hours (It varies slightly based on the

volume of the songs being played)

Rated Output Power: ＜8dBm

Time Required for Charging: About 1 hour (At room temperature)

Profiles: A2DP V1.3/AVRCP V1.6/HFP V1.7

• The above data is the test results under the standard laboratory environment. The actual situation of data and parameters will vary slightly depending on the test environment, test software and other factors.

Charging & Reminder

Low Battery Alarm

• In the working state, when the battery level is less than 20%, the red light flashes every 3 seconds until the headset is automatically turned off. When the battery level is less than 10%, the headset will give a low battery alert sound.

Charging

• Use the charging cable in the package to connect the headset and the power source for charging. While charging, the red light flashes every 1 second. When fully charged, the blue light keeps lighting up.

Wearing Detection

• Music pauses automatically when detected that the headset has been taken off; play music automatically when the headset is worn.

Attentions

• Please read the following contents and attention carefully before using this product, and abide by them when using it. We bear no liabilities for the consequences caused by the failure to use the product correctly or abide by the relevant instructions of this product.
  Electronic Devices

• Do not use the headset in places where wireless devices are expressly prohibited, otherwise, it will interfere with other electronic devices or cause other risks.
  Impacts on Medical Devices

• Please observe the relevant regulations and turn off the device in medical and healthcare facilities where wireless devices are prohibited.

• The radio waves generated by the device may affect the normal operation of an implanted medical device or personal medical devices, such as pacemakers, cochlear implants, hearing aids, etc. If you use these medical devices, please consult their manufacturers about the attention.
  Hearing Protection

• When you use the headset to listen to music or make phone calls, it’s recommended to use the minimum volume required for listening to music or making phone calls, so as not to cause hearing damage. Long-term exposure to high volume may lead to permanent hearing damage.

• Exposure to high volume while driving may lead to distraction, which may lead to accidents.
  Traffic Safety

• Please comply with the relevant regulations of the country or region where you are. Do not use this headset while driving.

• Remember that driving safety is your primary responsibility and do not engage in any activities which will distract you.

• The electronic equipment of your car may fail due to radio interference of the headset. Please contact the electronic equipment’s manufacturer for more information.

• The wireless devices may interfere with the flight system of the airplane, please abide by the relevant regulations of the airline and do not use the headset in places where wireless devices are prohibited.
  Operation Environment

• Do not use the headest in damp places or places close to magnetic fields, so as to avoid causing its internal circuit fault.

• It is strictly prohibited to use the headset in thunderstorm weather, which may cause failure in it or risk of being struck by lightning.

• Please use and store the headset and its accessories within the temperature of 5℃~35℃. Exposure to over-high or over-low temperature may cause headset failure.

• Do not allow the headset and its accessories to be exposed to rain or moisture, which may cause fire or electric shock hazard.

• Do not expose the headset to direct sunlight, such as placing it on the car dashboard or window sill.

• Never put the headset close to the heat sources or fire, such as placing it near the electric heater, microwave oven, oven, water heater, stove, candle or any other places that may produce high temperature.

• Do not place sharp metal objects such as pins near the receiver and speaker of the headset so as to avoid injuries caused by the adhesion of metal objects.

• Never allow children or pets to swallow or bite the headset or its accessories to avoid injury or resulting in failure or explosion of the headset.
  Children Security

• The headset and its accessories may contain some small parts. Please place the headset and its accessories out of the reach of children so that children may not inadvertently damage the headset and its accessories and avoid the risk aused by small parts such as suffocation on children.

• This headset is not a toy. Children should use it under the guidance of their guardians.
  Attentions for Charging and Battery Use

• Due to the consideration of environmental protection, this product is not equipped with a power adapter. You can use the USB interface on your computer or the power adapter with CE certificate to charge. And the output voltage and current of the power adapter should conform to the following specifications: output DC voltage: 5V; output DC current: No less than 1200mA.

• Please buy the power adapter through official channels.

• Poor-quality or counterfeit power adapters may cause an explosion or fire.

• The power adapter is a disconnecting device; the power outlet should be installed nearby for convenient disconn- ection. When repairing or disassembling the headset, please unplug the power adapter from the outlet.

• Please ensure that the Micro USB is dry and without dirt before charging.

• Never throw the battery into fire or expose it to an over- heated environment such as sun, roasting with fire or similar conditions to avoid leakage, explosion or fire disaster.

• Please charge the headset at 5℃-35℃ to avoid degradation in battery performance.

• To prevent children from getting an electric shock, please charge the headset under the guidance of parents or other guardians.

• Keep small cells and batteries which are considered swallow- able out of the reach of children:

  • Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2h of ingestion;
  • In case of ingestion of a cell or battery, seek medical assistance promptly.

Maintenance

• Non-professionals are not allowed to disassemble the headset without authorization. For any faults with the headset, please contact our local after-sales service center.
• Prevent the headset from falling and avoid knocking, vibrating or roughly treating it, which may lead to damage to its internal circuit board and precise structure.
• Keep the headset and its accessories dry and do not use heating tools (e.g. microwave oven, hair dryer, etc.) to dry it.
• Do not place the headset and its accessories in areas where the temperature is too high or too low, otherwise, it may cause device faults, fire or explosion.
• Before cleaning and maintenance, please stop using the headset, and disconnect all connections or charging cables from other devices.
• Do not use strong chemicals, detergents or strong detergents to clean the headset or its accessories. Use a clean, dry and soft cloth to wipe the headset or its accessories.
• Never keep the magnetic stripe card (e.g. bank card, SIM card, etc.) in contact with the headset for a long time. Otherwise, the magnetic stripe card may be damaged by the headset’s magnetic field.

Warranty Descriptions Service Terms

Thank you for choosing the imoo Ear-care Headset. Our company will provide comprehensive service assurance in accordance with local rules and regulations. In case of any inconsistency or omission with local policies, the local policies shall prevail.

• Within 30 days from the date of sale, users can choose product replacement or return for performance fault (not caused by human factors).
• Within 24 months from the date of sale, users can enjoy warranty service for performance fault under normal use.
• The information filled in the warranty card should be complete, accurate and convincing. Customer should ask for a valid purchase invoice and keep it properly.
• The premise of requesting warranty service is to have a valid warranty card and purchase invoice (The information filled in the valid warranty card and purchase invoice should be complete, accurate and without alterations). If the valid warranty card and purchase invoice are lost and a copy of the valid invoice cannot be provided, a 24-month warranty service will be provided since the 90th day after the date of production of the headset.
• We provide a 6-month (from the date of sale) replacement service for the charging cable. Other accessories (such as gift boxes, manuals, etc.) do not enjoy the warranty service.

Warranty Descriptions and Attentions

• The warranty service is only valid under normal use of the headset. For the cases as below, we do not provide warranty service but provide repair requiring an extra charge.

1. Exceeded the warranty period;
2. Damage caused by human factors, including damage caused by the use’s failure in using, operating or keeping the product as required by the manual;
3. Damage caused by unauthorized dismantling, mainten- ance, repair and modifications;
4. Damage caused by natural disasters (e.g. flood, fire, earthquake, etc.);
5. No valid warranty card or purchase invoice (except those that can prove the product is under warranty);
6. Unauthorized alterations of the warranty card; or the product model or code on the warranty certificate is inconsistent with the actual product;
7. Natural wear and tear during use (e.g. shell, charging cable, etc.);
8. Errors, damages and defects that are not caused by the quality of the product itself (e.g. liquid penetration, being affected with damp, dropped, extrused by external pressure, out of shape, being improperly used, etc.).

• Any oral agreement made by the dealer regarding the warranty contents, which is beyond the scope of this warranty agreement, shall not be included in the scope of warranty.
• If the product meets the requirements for replacement, you can go to the nearest imoo official center for replacement. During replacement, if the main machine is damaged, you can replace it with a new one of the same model; if the accessory is damaged, you can replace it. Both the replacement of the main machine and accessories are for free.
• All parts, components and accessories replaced within the warranty are owned by the company.

EU Declaration of Conformity (DoC)

• Hereby, Guangdong Genius Technology Co., Ltd., declares that this type of equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
• The declaration of conformity may be consulted at: https://www.imoo.com/en/pc/certification/index.html.

Waste Electrical & Electronic Equipment (WEEE)

• This symbol means that according to local laws and regulations, your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, the user has the choice to give his/her product to a competent recycling organization. Proper recycling of your product will protect human health and the environment.
• Our company will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products.
• Our company will comply with all the applicable laws related to WEEE management.

FCC Regulatory Conformance

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  • This device may not cause harmful interference;
  • This device must accept any interference received, including interference that may cause undesired operation.

NOTE:

1. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2. (2) This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communic occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
3. Reorient or relocate the receiving antenna.
4. Increase the separation between the equipment and receiver.
5. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
6. Consult the dealer or an experienced radio/TV technician for help.

NOTE:

The manufacturer is not responsible for any radio/TV interference caused by unauthorized modifications to this equipment. Such modification could void the user’s authority to operate the equipment.

RF Exposure

• The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device has also been tested against this SAR limit. Use 0mm away from the head.
  EU Regulatory Conformance

• Excessive sound pressure from earphones and headphones can cause hearing loss, hearing damage risk, high sound high sound pressure.

• For health reasons, avoid listening on high volume for extended periods.

• RF exposure information: The EIRP power of the device at maximum case is below the exempt condition, 20mW specification in EN62479: 2010. RF exposure assessment has been performed to prove that this unit will not generate the harmful EM emission above the reference level as specified in EC Council Recommendation (1999/519/EC).

Our company is committed to continuously improving the quality of our products, the descriptions stated in the manual may be slightly different from the actual product. Please read this manual carefully before using the product and keep it properly.
Images are for illustrative purposes only. The actual product may vary.

References

• imoo.com/en/pc/certification/index.html

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>