nVent HOFFMAN 87558910 JIC Swing-Out Panel Kit Instruction Manual
- June 13, 2024
- nVent HOFFMAN
Table of Contents
JIC Swing-Out Panel Kit
WARNING
To avoid electric shock and equipmentdamage, disconnect any power suppliesto
the enclosure before drilling mountingholes. Do not energize any circuits
beforeall internal and external electrical andmechanical clearances are
checked toassure that all assembled equipmentfunctions safely and properly.
This accessory maintains UL/CSA Type 12, 4, 4X when installed per these
instructions.
This accessory is covered by UL file E61991 and CSA file LR42186.
Installation Steps:
- Swing panel may be hinged on any side. Determine mounting position desired and drill (8) Ø.172 (4mm) holes as shown.
- Mount hinges (Item 7) and brackets (Item 8) using pan head screws (Item 11) with nylon washers (Item 12) under the screw heads.
- Mount swing panel to hinges (Item 7) with pan head screws (Item 3) and lockwashers (Item 4). Adjust panel until it swings freely through the door opening.
- Captivate thumb screws (Item 5) to panel using retaining rings (Item 6) provided.
©
2018 Hoffman Enclosures Inc.
PH 763 422 2211
nVent.com/HOFFMAN
87558910
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>