logitech VR0022 Scribe Whiteboard Camera User Guide
- June 6, 2024
- Logitech
Table of Contents
SCRIBE
Setup Guide
WHAT’S IN THE BOX
Camera Unit| Camera Mounting Bracket| Mounting Template| Share Button| Power Injector| Dongle Transceiver
CAT5e Cables| Cable Clips| Boundary Stickers| IEC C8 Power Cord Adapter| Molly Bolts| Wood Screws
CAMERA I/O
CONNECTIONS OVERVIEW
RECOMMENDED CAMERA PLACEMENT HEIGHT
If needed, apply boundary stickers to mark the max capture area.
STEP 1: ATTACH THE CAMERA MOUNTING BRACKET
Mark screw hole locutions using the mounting template.
STEP 2: PLUG IN THE CAT5E CABLE AND CHOOSE A ROUTING OPTION
STEP 3: ATTACH THE CAMERA ONTO THE CAMERA MOUNTING BRACKET
STEP 4: CONNECT THE CAT5E CABLE TO THE POWER INJECTOR
Insert cable connected to camera to “OUT”.
STEP 5: CONNECT THE POWER INJECTOR TO A POWER OUTLET
STEP 6: CONNECT SECOND CAT5E CABLE TO THE POWER INJECTOR
Insert cable connected to camera to “IN”.
STEP 7: CONNECT THE OTHER END TO THE DONGLE TRANSCEIVER.
PLUG THE DONGLE TRANSCEIVER INTO THE MEETING ROOM PC.
RECOMMENDED BUTTON PLACEMENT HEIGHT
Install the button 30″- 48″ from the floor.
STEP 8: INSTALL SHARE BUTTON
Remove the battery pull tabs only after you have mounted Shore Button to the wall.
STEP 9: START WHITEBOARD SHARING FROM MEETING ROOM TOUCH CONTROLLER
STEP 10: CONFIRM CALIBRATION TO FINISH SETUP
If calibration is correct, press the Share button to confirm. If calibration is incorrect, download Logitech Sync to adjust boundaries. Iogitech.com/sync.
STEP 11: READY TO GO!
Press Shore Button to eosily start/stop whiteboard shoring into meetings.
© 2021 Logitech, Logi, and the Logitech Logo are trademarks or registered
trademarks of Logitech Europe S.A. and/or its affiliates in the U.S. and other
countries. All other trademarks are the property of their respective owners.
Logitech assumes no responsibility for any errors that may appear in this
manual. Information contained herein is subject to change without notice.
620-010125 003