maxell EB-BTONE Quick Response TWS Earbuds User Manual

June 8, 2024
Maxell

maxell EB-BTONE Quick Response TWS Earbuds

Unboxing

maxell-EB-BTONE-Quick-Response-TWS-Earbuds- \(2\)

Device Overview

maxell-EB-BTONE-Quick-Response-TWS-Earbuds- \(3\)

  1. Tap area
  2. Indicator (red)
  3. Status LED (red)
  4. Charging interface
  5. Charging port

Charging

Please fully charge the ONE after unboxing. Use a Type-C cable to charge the charging case.

Charging Indicator Status

  • Charging Case Indicator light ON (By Type C charging)
    • Charging by Type C: Charging Case indicator flashes red 1 time/ 2 seconds
    • Fully Charged by Type C: Charging Case indicators always ON white
  • Charging Case Indicator light ON (Without Type C charging)
    • Red Indicator lights ON: while charging the earbuds (automatically light off after 5 seconds)
    • Charging cas battery low: Red indicator blinking Indicator lights OFF while charging case runs out of energy

Earbuds Indicator

  • Charging: Earbuds indicator light ON RED
  • Fully Charged: Earbuds RED indicators light OFF
  • Battery Low: Red indicator flashes 1 time / 5 seconds

Auto On & PAiring & Auto Off

  • A: Ensure both buds are inside the charging case and take out both buds. The buds indicator will flash for a while, which means the earbuds were Power On.
  • B: Press ONE form the smartphones Bluetooth menu. There’s a voice prompt “Your Device is Connected” after succeed connection with smartphone.
  • C: Both buds will be AUTO OFF after into case around 5 seconds or disconnected with smartphone over 5 minutes.

Manual ON/OFF

  • Long press L and R earbuds for 5 seconds until indicator flashes 3 times and Power OFF.
  • Quick press L&R 1-2 times until indicators light up to Power ON.

Manual Pairing
After Manual On, Double press L/R buds (not recommend)

Reset

  • Make sure the ONE were disconnected with phone or other Bluetooth devices.
  • Put both earbuds into changing case for 5 seconds until indicator lights off and then take them out, QUICKLY TAP L or R earbuds 5 times to enter into paring mode, both earbuds indicators will flash until pairing, which means the ONE had been reset successfully.
  • Put them back into charge case, and the Hifuture ONE ready to Use on AUTO ON & AUTO Pairing.

Voice Prompt

  1. Disconnected
  2. Gaming Mode ON
  3. Gaming Mode OFF
  4. Connected
  5. Pairing
  6. Low Battery
  7. Power ON
  8. Power OFF
  9. Min. Volume
  10. Max. Volume
  11. Reset Successful
  12. Incoming Call

MFB Instructions

  • Not all device support this functionalitymaxell-EB-BTONE-Quick-Response-TWS-Earbuds- \(12\)

Maxell Corporation of America,
3 Garret Mountain Plaza, 3rd
Floor, Suite #300, Woodland
Park, NJ 07424.
www.maxell-usa.com.

Maxell Latin America,
PH Oceanía Plaza
Torre 2000, Panama City,
Rep. of Panama.
www.maxell-latin.com

Maxell Canada,
8500 Leslie Street,
Suite 101, Markham Ontario,
Canada L3T 7M8.
www.maxellcanada.com

Maxell Europe Limited
Ground Floor, Block E
Sefton Park, Bells Hill
Stoke Poges
Buckinghamshire SL2 4HD
Email: hq@maxell.eu

Termék: fejhallgató
Maxell Europe Ltd
Hungary Branch Oce,
H-1095 Budapest,
Máriássy Utca 7.Hungary
Email: mhb@maxell.eu
www.maxell.eu

www.maxell.com

SCAN FOR MORE INFORMATION:

maxell-EB-BTONE-Quick-Response-TWS-Earbuds- \(1\)

Documents / Resources

| maxell EB-BTONE Quick Response TWS Earbuds [pdf] User Manual
EB-BTONE Quick Response TWS Earbuds, EB-BTONE, Quick Response TWS Earbuds, Response TWS Earbuds, TWS Earbuds, Earbuds
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals