chewy 253037 Pet Fountain Replacement Filters Instruction Manual

chewy 253037 Pet Fountain Replacement Filters

GET SET TO HYDRATE!

Before assembling, check out all the parts included:

INTENDED USE

• Intended to be used as a water source for your pets. For household use only.
• For pet use only.
• Use only in dry indoor areas.
• Not for outdoor use.
• Do not use with the power adapter close to a tub or sink.
• Improper use can result in damages or injuries.

BEFORE FIRST USE

• Remove all packaging materials.
• Check product for any damages before assembling and using.
• Clean the product with warm soapy water. Do not clean the power adapter.
• Soak filter in water for 2 minutes and rinse for 30 seconds.

CLEANING AND MAINTENANCE

Giving the fountain parts a quick rinse and dry at least every 2 weeks To clean the pump, disassemble the parts and clean each separately. Dry all parts thoroughly after cleaning.

GETTING YOUR PET TO USE THE FOUNTAIN
Some pets may need extra time to CO’ZY up to their new watering spot. If your pal doesn’t take to this hydrating oasis right away, place it next to their bowl to help encourage them to use it

STORAGE

• Keep in a cool, dry place away from children and pets.
• Avoid any shocks or vibrations.

WARNINGS
Risk of injury, fire or electric shock!

• For pet use only.
• Never wash the power adapter.
• Never immerse the power adapter in water or other liquids.
• Do not hold power adapter under running water.
• Pet fountain should always be unplugged when: not in use. before and during deaning. and before putting on or taking off any parts.
• Regular1ycheckwater level and never let it drop below the MIN level. The submersible pump should never run without adequate water, as it can overheat.
• Never let your pet chew on the cable as there is a risk of an electric shock. If your pet is known to chew cables, a gravity waterer may be a better option. Discontinue use if the cable is chewed.
• Only the pump is waterproof. Do not submerse the power adapter.
• Do not use any harsh detergents, wire brushes or any utensils to clean.
• Use close supervision when using near children.
• Do not pull on the cable to unplug. Only grasp the power adapter to unplug.
• Do not use if cable is damaged or if the product is dropped.

PUTTING IT TOGETHER

Save these instructions for future reference. Use all parts included for assembly and follow all instructions carefully .

• Step 1
  Soak the filter in water for 2 minutes and rinse for 30 seconds before insert the filter into the filter holder.

• Step 2
  Locate the slider – Move the pump’s slider up/down to adjust the water flow. The recommended starting default location of this product is the highest one.
  HINT: Fill with clean water to the MAX level.

• Step 3
  Insert the stainless steel cover into the filter holder, make sure insert it into the slot on the plastic holder.

• Step 4
  Put the installed stainless steel cover and filter holder into the opening on the rim of the base

• Step 5
  Fill the clean water to the water level between MIN and MAX on the water level indicator. Pump only operates when water level is above the MIN water level, if not it will stop to operate.

• Step 6
  Connect to the power up supply.

CAUTION

RISK OF ELECTRIC SHOCK! When not in use, always leave unplugged.

• Do not turn the Pet fountain on without filling with water .
• Only use the Pet Fountain on a dry, flat, water-resistant surface.
• TURN IT ON: Connect the pump cable to the power adapter, then plug into a main socket. Always make sure there is enough water in the container before turning on.
• TURN IT OFF: Unplug the power adapter. Never pull on the cable to unplug.
• TIP: To adjust the water flow, use the built-in slider on the pump.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>