nolon 45654 Eef Dining Room Chair Instruction Manual
- June 17, 2024
- nolon
Table of Contents
nolon 45654 Eef Dining Room Chair
Product Information
Specifications:
- Product Name: Nora
- Model Number: NOL.NORA-MANUAL
- Concept: Nolon offers individual parts for chairs and bar stools
- Compatibility: All nolon chairs fit to all nolon bases
Product Usage Instructions
Assembly Instructions:
To assemble the Nora chair, follow these steps:
- Start with the Nora base.
- Choose the appropriate mounting set (B, D, or G) based on your desired seat.
- Follow the provided instructions to assemble the Nora base.
- Once the base is assembled, proceed to mount the seat on the base.
Mounting the Seat on the Base:
To mount the seat on the Nora base:
- Tighten the screws provided with the mounting set to 80%.
- Ensure that the arrow on the base is pointing towards the front of the seat.
Floor Protection:
Please note that the chair comes with plastic floor protectors. However, if
necessary, you may need to fit or replace protective caps on the chair legs to
prevent damage to the floor.
FAQ
-
Do I need floor protection?
If you are concerned about floor damage, you can scan the QR code provided to get more information about floor protection options. -
Need Help with Assembly?
If you need assistance with the assembly process, you can scan the QR code provided to access helpful installation videos. If you still have questions, feel free to contact our customer service for further assistance.
THANK YOU FOR CHOOSING NOLON
nolon is a unique concept: we do not offer ready-made chairs and bar stools,
but supply individual parts, so you can put together your ideal piece of
furniture!
- To summarize: all our nolon chairs fit to all our nolon bases. That is why we provide detailed assembly instructions.
- Method: We start with the base and add one of our seats. Not all chairs require the same mounting parts to assemble to the base. If you have opted for a Nora base, we will first explain how to assemble the Nora base. An overview of the seats and the matching mounting sets, which may vary (sets B, D or G). Additionally followed by a clear explanation of how to mount the seat on the base.
- If you need help, watch our online installation videos. If not clear, do not hesitate to contact our customer service. We are happy to help you.
NORA BASE
- The Nora base is supplied in one piece.
- To install the seat on the base, go to the assembly instructions.
- Caution! Please note that it may be necessary to fit or replace protective caps on the chair legs to prevent damage to the floor.
ASSEMBLY INSTRUCTION WITH ASSEMBLY KIT
Install the base on the seat as shown in the image above. Tighten the screws to 80%.
Important:
Make sure the arrow on the base points towards the front of the seat.
Install the base on the seat as shown in the image above. Note! The washer F needs to be assembled between the base and the seat. Tighten the screws to 80%.
Important:
Make sure the arrow on the base points towards the front of the seat.
Install the base on the seat as shown in the image above. Note! The washer I needs to be assembled between the base and the seat. Tighten the screws to 80%.
Important:
Make sure the arrow on the base points towards the front of the seat.
LAST STEP OF THE ASSEMBLY
Finally, turn the chair over and place the entire chair on a flat surface. Place approximately 60 kg of weight on the seat so that all legs are on the ground and then tighten all screws to 100%.
CARE INSTRUCTIONS
Below you will find some maintenance tips and tricks so you can enjoy your new chair to the fullest.
-
Metal
Over time, metal tent to rust if it has come into contact with water and moisture. The metal frames of nolon chairs have a special coating that prevents rust formation. Therefore, it is very important not to damage or scratch this coating (outer layer of the frame). The metal frames can be cleaned with a soft cloth and soapy water. Do not use too much water and always dry the surface afterwards. -
Wood
Wood is a natural material that changes color under the influence of UV radiation. To avoid major colour differences, all furniture must be exposed to the same amount of sunlight. Temperature and humidity can also damage wood. For daily maintenance, you can use a dry microfiber cloth to dust wood. Stains can be removed with a soft cloth and soapy water. Do not use too much water and always dry the surface afterwards. -
Fabric upholstery
All fabrics can discolour due to UV radiation, so make sure that the chairs are not exposed to direct sunlight. Treat the fabric with a protective spray before use to prevent stains. Test the spray in advance on an invisible surface. Remove moisture or stains immediately using only a damp or special textile cleaner. Avoid harsh rubbing and the use of chemicals and alcohol should be avoided. Lint from the textile may appear on the surface, but this is completely normal and will not return after a few removals. When fabric seats are removed from the box, pressure points may be visible in the fabric. These should disappear within a few days. -
Plastic
Plastic material is easy to clean and maintain. A plastic seat does not need to be treated before use. Stains can be removed with a soft cloth and mild detergent. -
Floor protection
nolon hairs are equipped with standard floor caps, but these do not provide sufficient protection for all types of floors. That is why nolon has designed special floor caps for each chair frame so that each floor is properly protected. Scan the QR code for more information and additional products on the nolon website.- Vloerbescherming nodig? Scan de QR-code
- Do you need floor protection? Scan the QR-code
- Scan de QR-code voor onderhoudsinstructies
- Scan the QR code for the care instructions
Contact Information
- Vlotbrugweg 9 1332 AE Almere NL
- www.nolon.nl
- [email protected]
- 036 799 80 25