QFX BTR345 Multi-Functional Bluetooth Radio Instruction Manual

: June 6, 2024
: QFX

Table of Contents

Product Overview
Controls
USB or TF Playback
Bluetooth Play Instructions
Charge your Mobile Device
FCC Statement
Check out These other Models
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QFX BTR345 Multi-Functional Bluetooth Radio Instruction Manual

Product Overview

TELESCOPIC ANTENNA
BAND SWITCH
TUNING KNOB
VOLUME CONTROL
LIGHT ON/OFF BUTTON
BATTERY COMPARTMENT
HEADPHONES JACK
SOLAR PANEL
DC 5V INPU T/ CHARGE
CHARGE INDICATOR LIGHT
POWER INDICATOR LIGHT
USB SLOT
TF SLOT
PREV/REW BUTTON
NEXT/F.F BUTTON
PLAY/PAUSE BUTTON
REPEAT BUTTON
LED LIGHT
SPEAKER
HAND STRAP
USB 5V OUTPUT JACK
DC 5V INPUT/ CHARGE

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN

To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store operate this product near any liquids, heat sources such as radiators, heat registers or under extreme weather conditions. Clean only with a dry cloth.
Users should exhibit extra safety when the WARNING or CAUTION symbol appears in this instruction manual and follow all precautions as they are stated.

Controls

Slide the function switch (2), and then turn the tuning knob (3) to receive different stations from AM/FM/SW 1-4.
When listening to the FM stations, please pull out the antenna and change the length to make the listening clear.
When listening to the AM stations, please change the radio’s position until you receive the best signal.

USB or TF Playback

Set the function selector to “MP3/BT” (2)
Insert a USB flash drive or a TF card with MP3 format music, the unit will play automatically.
Press PAUSE/PLAY button (16) to hold the playback, press it again to continue the playback. Press the REPEAT button (17) to repeat the song playing, press again to cancel repeat function. Press the REWIND button (14) to select the previous song. Press the FORWARD button (15) to play the next song.

Bluetooth Play Instructions

Slide the function switch to MP3/BT (2) position
After listening to the bluetooth “beep” sound;
Open the mobile device’s Bluetooth settings to search and connect “R-37”, when successfully connected a “ding dong” sound will play.
After the success of the mobile device pairing, open and play the music directly from your mobile device.

Charge your Mobile Device

The charge time varies based on the mobile device variety.

If using USB 5V Output Jack (21), to charge your mobile device, you must switch to Output (5).
Charging can also be properly done with the DC 5V Output Jack (21).

Note

This model includes built in rechargeable battery.
In order to prolong battery life and product normal use, charging time please charge for 6-8 hours.
Put 18650 battery into battery compartment (6) paying careful attention to the polarity.

Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Attention should be drawn to environmental aspects of battery disposal. CURRENT 1600mA POWER 6W.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.