FIRST DEGREE FITNESS QB8D90 Pacific Challenge AR Rower User Manual
- June 6, 2024
- FIRST DEGREE FITNESS
Table of Contents
FIRST DEGREE FITNESS QB8D90 Pacific Challenge AR Rower
Sensor Troubleshooting
- Check the gap between sensor and magnetic ring should be 2-3mm
- Visually check all 6 magnets in the magnetic ring are present and flush (no need to remove the ring)
- Check sensor head – the internal sensor should be no more than a few millimeters inside the hole
- If the above checks fail to resolve the issue continue to the next section
Sensor Removal
| Remove the Frame Plug
---|---
| Pull the Speed Sensor out of the frame
| Disconnect the sensor cables
| Remove the washer from the Speed Sensor
Sensor Re-Installation
| Fit washer onto the new Sensor
---|---
| Connect the cables.
| Install the Speed Sensor as
shown.
| Replace the Frame Plug.
Documents / Resources
|
FIRST DEGREE FITNESS QB8D90 Pacific Challenge AR
Rower
[pdf] User Manual
QB8D90, Pacific Challenge AR Rower
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>