My PowerGlide® Lift-Off® Upright Pet Vacuum has No Suction | Support
- June 7, 2024
- Bissell
Table of Contents
If your vacuum is not suctioning like it used to it is likely due to an
obstruction in the air pathway
Follow these steps to resolve:
-
Test for suction at end of the Hose (dirt tank must be attached to machine)
- Lift the Hose from the base
- Turn on, hold hand over end of end of Hose
-
Is there suction at the end of the Hose?
- Yes > Go to Lower Hose/Foot
- No > Remove the Hose completely by disconnecting from the top the machine
-
Inspect the Hose, is it cracked or damaged?
- Yes > Replace the Hose > Go to Parts & Supplies
- No > Push a broomstick through Hose to clear clogs & debris
-
Reconnect Hose to the back of the machine
-
Turn on > Check for suction at the end of the Hose
- Is there suction?
- Yes > If you’re still having suction issues at the Foot > Go to Lower Hose/Foot
- No > Go to Filters/Tank
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>