Onvian KS-SF31 Smart Bike Tail Light with Turn Signals Instructions
- June 9, 2024
- ONVIAN
Table of Contents
KS-SF31 Smart Bike Tail Light with Turn
Signals Instructions
Troubleshooting
Q1:The remote control can’t control bike tail light. Please follow the
order of ①②③ in A1 below to troubleshoot.
A1： ①:Make sure you have full charge the alarm taillight for activation before
first use.(Note: Before first use, you have to charge and it will be activated
,better to full charge, the 1~4 grids flashing on right turn signal correspond
to the battery level 1~4. When the right turn signal full stay on, the battery
is fully charged.
②：Check whether the remote control can light up. If not, please replace remote
control battery. If light up, try to repair the remote and the turn signal
light again.(repair method: turn off tail light and enter disarm mode, press
and hold the [light mode button/pair button]about 3s,the turn signal light
will make a“Bi”sound and turn signal circulate flow, it enters the pairing
program. →→→ press any button on remote control ,the taillight will make
“BiBi” sound. The alarm taillight and the remote have paired
successfully.→→→Press [light mode button/pair button]again to exit pairing
program and now you can use remote control.
③ ： When press remote control ,the indicator light flashes quickly to indicate
that the key have entered the ANTI-ACCIDENTAL KEY LOCK FUNCTION, please unlock
and use again.(unlock method: first press and hold remote control [electric
bell button] and [right turn light] key for 3s ,the indicator light of the
remote control is continuous on once, Done.
Q1:Cannot be charged.
A2:Some fast charger plugs are not compatible. Please change plugs and try
again.
Q3:How to change sensitivity level for alarm?(NOTE: VOLUME CAN NOT BE
ADJUSTED)
A3:https://www.amazon.com/ask/questions/TxOZOL98U7N6T7/ref=ask_ql_ql_al_hza
Q4:How to adjust the horn type?
A4:https://www.amazon.com/ask/questions/Tx3P7SGHNOHIKSI/ref=ask_ql_ql_al_hza
Q5:If the remote control is lost, can I buy a new remote control to re-pair
it?
A5:If your remote control is lost when the host is in alarm state, it can’t
match the new remote control, at this time you need to wait for the power of
the taillight host to run out before the alarm sound will stop, or open the
back cover of the host, pull out the battery and reinstall then pair the new
remote control.
If you encounter more usage problems, please contact
[email protected], we will reply
to your email at the first time.
This troubleshooting document is being updated.
Documents / Resources
|
Onvian KS-SF31 Smart Bike Tail Light with Turn
Signals
[pdf] Instructions
KS-SF31 Smart Bike Tail Light with Turn Signals, KS-SF31, Smart Bike Tail
Light with Turn Signals, Light with Turn Signals, Turn Signals
---|---