XVX M84 Wireless Mechanical Keyboard User Manual
- June 11, 2024
- xvx
Table of Contents
Theme Series M84
Wireless Mechanical Keyboard
User Manual
Introduction
Thank you for choosing Mechanical Rechargeable Keyboard. For the best results,
please read the user manual carefully before using this product.
RGB Backlit Modes
FN+PrtSc : Adjust 19 LED backlit modes
FN+Pause: Adjust lighting color, 9 levels
FN+ ↑ : Increase brightness
FN+ ↓ : Decrease brightness
FN+ → : Increase speed
FN+ ← : Decrease speed
XVX Gaming Interaction mode
| FN+DEL | First mode: FPS — WASD R ←→↑↓ ESC up blocks light up |
|---|
Second mode: COD — QWERTASDFGCV 1-7 Ctrl Shift blocks light up
Third mode: Car — WASDR Ctrl Shift Alt ←→↑↓ At 1 blocks light up
Fourth mode: LOL — 1 QWER DGFBV Ctrl Alt Tab ∼ 1-6 Esc blocks light up
Note: The lighting of the 4 preset game modes can be recorded.
- Recording steps:
Set the individual keys first, then adjust to the color (red, orange, yellow, green, blue, purple, white, pink).
After entering any game mode, press FN+HOME to start recording, the key has no output function at this time, the indicator light flashes, click the key to be recorded, adjust the light color. To finish recording, press FN+HOME to finish recording .
Multimedia Funtion
FN+F1: Home
FN+F2: My Computer
FN+F3: Mail
FN+F4: Music
FN+F5: Previous Playlist
FN+F6: Next Playlist
FN+F7: Play/Pause
FN+F8: Stop
FN+F9: Mute
FN+F10: Volume down
FN+F11: Volume up
FN+Fl 2: Lock/Unlock the keyboard
Multimedia Function
FN-+ Esc : Hold for 3 seconds to restore factory settings
FN+WIN : WIN lock/unlock
FN+W: WSADis interchanged with ↑↓←→, click FN+W again to restore to normal
Package Contents
- 1x Mechanical Rechargeable Keyboard
- 1x USB Nano Receiver
- 1x Type-C Cable
- 1x User Manual
- 1x Keycap Puller
- 1x Switch Puller
Features:
- Mechanical 84K keyboard
- 2.4G Wireless + Wired dual modes
- Rechargeable battery:1850mA
- RGB backlit, 19 kinds of lighting modes
- USB Full Speed 2.0 (12Mbps)
- N-key rollover
Installation, Connection and Use
-
Wired mode
Toggle the switch to the right (the color card shows red) for wired mode Connect the USB charging cable to your computer. -
2.4G Wireless mode
Charge the battery. Toggle the switch to the left (the color card shows green) for wireless mode
Plug the USB nano receiver into the USB port of your computer.
Once the computer recognize the keyboard, you’re ready to use.
In 2.4G Wireless mode, If not use for more than 60 seconds, the RGB backlit
will turn off automatically and keyboard enter power-saving mode. It is better
turn off the keyboard when not use for long time.
Bulld the connection between the USE recelver and keyboard
Toggle the power switch to the left (the color card shows green), preess FN+P
for 5 seconds, now the key”P”is flashing. Plug the USB nano receiver into the
USB port of your computer. Key “P” stop flashing after building connection
successfully.
Charge the keyboard
The battery should be charged for at least 6-8 hours before being used for the
first time.
When the battery is low, the FN key red light flashes. Connect the USB
charging cable to your computer or adapter.
The charging indicator is located on the left side of the space bar, the
charging status lights up, and it turns off when fully charged. (charging
time: around 6-8 hours).
NOTE: If you want to use the keyboard when charging, you should choose
wired mode, the power switch must be toggled to the right position.
Troubleshooting Tips
If you experience problems while using the keyboard, here are some helpful
troubleshooting tips:
Check the power switch is on the left
Check the battery is charged
Check the receiver is properly connected to the USB port
Try reducing the distance between the keyboard and the computer
Remove any large metal objects located between the keyboard and the computer
that could interrupt the signal
Product picture are for reference only.
Pro software download link
https://www.xvxchannel.com
- Please note the macro software is only available for Windows PC at this time.
- The software can only be used in wire mode adjust the power switch to the OFF position.
Standard layer 
https://www.xvxchannel.com
instagram.com/xvx__keyboard
focebook.com/xvrkeyboard
http://www.XVXCHANNEL.COM