ecler VEO-AXS4 HDMI 2.0 Audio Extractor User Manual

ecler VEO-AXS4 HDMI 2.0 Audio Extractor User Manual

IMPORTANT REMARK

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING: SHOCK HAZARD – DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance

WARNING (If applicable): The terminals marked with symbol of “ ” may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the use of ready-made leads or cords

WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

WARNING: An apparatus with Class I construction shall be connected to a mains socket-outlet with a protective earthing connection.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightening sorts or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Disconnecting from mains: Switching off the POWER switch all the functions and light indicators of the amplifier will be stopped, but fully disconnecting the device from mains is done unplugging the power cord from the mains input socket. For this reason, it always shall remain readily operable.
15. Equipment is connected to a socket-outlet with earthing connection by means of a power cord.
16. The marking information is located at the bottom of apparatus.
17. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING: This product must not be discarded, under any circumstance, as unsorted urban waste. Take to the nearest electrical and electronic waste treatment centre.

NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused to people, animal or objects due to failure to comply with the warnings above.

IMPORTANT NOTE

Thank you for choosing our VEO-AXS4 audio de-embedder. It is very important to carefully read this manual and to fully understand its contents before making any connection in order to maximize your use and get the best performance from this equipment.

To ensure optimal operation of this device, we strongly recommend that its maintenance be carried out by our authorised Technical Services.

All ECLER products are covered by warranty, please refer to[

www.ecler.com](http://www.ecler.com) or the warranty card included with this product for the period of validity and conditions.

INTRODUCTION

Ecler VEO-AXS4 is a professional HDMI audio de-embedder that allows to extract audio from the HDMI signal, including audio from 4K sources. VEO-AXS4 provides uncompressed LPCM analog stereo signal through RCA output as well as Dolby Digital and DTS multichannel signals through the S/PDIF digital output. The VEO-AXS4 is HDCP 2.2 and HDMI 2.0 compliant, supporting data rates up to 18 Gbps and video resolution up to 4K/60Hz with 4:4:4 chroma sample and HDR content.

Features

• Audio EDID Settings: Auto/2.0 CH/5.1CH
• Extracts digital HDMI audio signal from HDMI input to 2 channels
• Analog stereo and 5.1 S/PDIF output
• Signal amplifier and equalizer for extending HDMI input and output ports for up to 10 meters (33 feet)
• Supports LPCM, Dolby Digital and DTS
• Supports resolution up to 4K@60Hz YUV 4:4:4
• Supports deep color up to 36bit
• Supports sample rate up to 192 KHz and resolution up to 24 bit
• HDCP 2.2/1.4 Compliant
• Supports CEC

PACKAGE CONTENTS

• 1 x Main Unit: 4K HDMI Audio De-Embedder
• 1 x International DC 5V Power Supply

PANEL DESCRIPTION

Front Panel

1. HDMI Pass-through Output
2. HDMI Link Indicator
3. S/PDIF Audio Output
4. Stereo Analog Audio Output

Rear Pane

1. Power LED Indicator
2. DC 5V Connector
3. Micro USB Port (Reserved)
4. HDMI Input
5. 2.0CH Audio
6. Auto mode (pass-through)
7. 5.1CH Audio

CONNECTION AND INSTALLATION

1. Connect HDMI signal source (such as PC, Blu-ray player, etc) to HDMI input of VEO-AXS4.
2. Connect HDMI display device (such as 4K or Full HD display) to HDMI output of VEO-AXS4.
3. Connect an Optical audio cable or RCA audio cable to amplifier or any other audio device input.
4. Connect 5V DC power supply to VEO-AXS4 4K HDMI Audio De-Embedder.

APPLICATION DIAGRAM

TECHNICAL SPECIFICATIONS

Supported Resolutions: 4Kx2K/1080P/1080i/720p/576p/576i/480p/480i
Colorspace: RGB, YCbCr
Colour depth: 8-bit, 10-bit, 12-bit
Signal Bandwidth : 18 Gbps
CEC: Pass-Through
HDCP: 2.2/1.4 Compliant
HDR: HDR10
Audio Formats: LPCM 2.0, LPCM 5.1, Dolby Digital, DTS-HD Master
Audio, Dolby true-HD
Bitrate Supports: 24-bit
Sample Rate : 32KHz, 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz,
192KHz
HDMI Distance: up to 10 meters (33 feet) with Ecler VEO cables
Operating Temperature: 5°C to 35°C (41°F to 95°F)
Humidity: 5 to 90% non-condensing
Power Consumption: 2W Maximum
Power Supply: AC 100V ~ 240V 50/60Hz Output: DC5V 1A
Dimensions: L x W x H 105mm x 65mm x 29mm (4.13“ x 2.56” x 1.14”)
Weight: 175g (0.386 lbs)

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.

Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403
information@ecler.com
www.ecler.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>