EDIFIER EDF131 Gaming Speakers User Guide

EDIFIER EDF131 Gaming Speakers

Important safety instruction

1. Please read the instructions carefully. Keep it in safe place for future reference.
2. Use only accessories approved by the manufacturer.
3. Install the instrument properly by following the instructions in the device connection section.
4. Using the product in a 0-35℃ environment is recommended.
5. To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
6. Do not use this product near water. Do not immerse the product into any liquid or have it exposed to dripping or splashing.
7. Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).
8. Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product.
9. Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric shock.
10. Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended).
11. Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and is oriented to the right direction.
12. Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake.
13. Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately.
14. Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first.
15. Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning.

• Excessively loud music may lead to hearing loss. Please keep the volume in a safe range.
• Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Power warning:

1. Place the product near the power outlet for easy use.
2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can be found on the product plate.
3. For safety purposes, unplug the product during lightning storms or when unused for extended periods of time.
4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution.
5. Safety warning labels on the housing or bottom of the product or power adaptor.

• This symbol is to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable part inside. Take the product to an authorized service center for repair.
• This symbol indicates that the product is for indoor use only.
• This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement.

The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. For wireless products:

1. Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or medical equipment.
2. Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplanes, at gas stations, near-automatic gates, automatic fire alarm systems or other automated devices.
3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may affect the normal operation of the pacemaker or other medical devices.

Box contents

Note: Images are for illustrative purposes only and may differ from the actual product.

Illustration

1. Optical input port
2. Coaxial input port
3. Power switch
4. AUX input port
5. Connect to passive speaker port
6. USB port for type B connector (USB digital audio input)
7. Power cord interface
8. Connect to active speaker port
9. Sound/ LED effects modes switch Press: sound effect modes (Music – Game – Movie) Double press: switch to RGB mode/restart RGB light effects Press and hold: turn off RGB light effects/restart RGB light effects
10. Sound effect indicator (Red)
11. Volume control dial Slide upward: volume up Slide downward: volume down
12. Power/mode switch Press: mode switch(USB sound card-Bluetooth-AUX-Optical-Coaxial) Press and hold: power on/off Double press: disconnect Bluetooth
13. Functional indicator (Blue)

Connection

Audio input

AUX/USB sound card input

• Press the Power/mode switch “ ” on the active speaker to switch to “ ”/ “ ”, and enter into AUX or USB sound card input mode, the blue light will steady lit.
• Connect the audio cable to the AUX/USB input port on the rear panel of the active speaker, and the other end to the audio source (i.e. PC, mobile phones and etc.).
• Play music and adjust the volume to a comfortable level.

Optical input

• Press the Power/mode switch “ ” on the active speaker to switch to “ ”, and enter into optical input mode, the blue light will steady lit.
• Connect the Fiber optic audio cable to the optical input port on the rear panel of the active speaker, and the other end to the audio source (i.e. DVD, Set Top Box etc.).
• Play music and adjust the volume to a comfortable level.

Coaxial input

• Press the Power/mode switch “ ” on the active speaker to switch to “ ”, and enter into coaxial input mode, the blue light will steady lit.
• Connect the coaxial audio cable to the coaxial input port on the rear panel of the active speaker, and the other end to the audio source.
• Play music and adjust the volume to a comfortable level.

Bluetooth input

• Press the Power/mode switch “ ” on the active speaker to switch to “ ”, and enter into Bluetooth input mode.
• Set your mobile phone to search for and connect to “HECATE G5000”, after pairing is successful, the blue light will steady lit.
• Play music and adjust the volume to a comfortable level.

Note:

1. To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP and AVRCP (Bluetooth audio transmission Profiles).
2. Bluetooth connectivity and compatibility may be different between different source devices, depending on the software versions of source devices.
3. Only the standard PCM audio signals (44.1KHz/48KHz) function in optical/coaxial mode.

Specifications

Power output: R/L(Treble): 12 W + 12W R/L(Bass): 32 W + 32W
Frequency response: 70Hz – 40KHz (Hi-Res)
Noise level: ≤25dB(A)
Audio input: Bluetooth/optical/coaxial/AUX/USB sound card Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power output : ≤20 dBm (EIRP)
There is no restriction of use.

Troubleshooting

Only one of the speakers has sound

• Please check if the connections between the speakers are connected properly.
• Try to connect other audio source devices. If the speaker can sound normally, please check the previous audio source.
• If the speaker is still abnormal, please contact after-sales customer service.

No sound

• Check if the speaker is ON.
• Try to turn up the volume using the volume control.
• Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
• Check if there is a signal output from the audio source.

Noise coming from speakers

• EDIFIER speakers generate little noise, while the background noise of some audio devices are too high. Please unplug audio cables and turn the volume up, if no sound can be heard at 1 meter away from the speaker, then there is no problem with this product.

FCC Regulatory Compliance

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Regulatory compliance

This device contains license-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

References

• Headphones, Speakers | A Passion for Sound -【Edifier USA】
• HECATE- Discover The New Gaming World | Headphone, Speaker, Earbuds

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>