BRYDGE BRY801K Bluetooth Wireless keyboard User Manual
- June 6, 2024
- Brydge
Table of Contents
BRYDGE BRY801K Bluetooth Wireless keyboard
POWER
-
TO TURN ON: Press the power key for one second until the LED flashes green.
-
TO TURN OFF: Press and hold the power key for three seconds until the LED flashes red.
-
NOTE: To conserve battery, your Brydge will enter sleep mode after 20 minutes of non-use. Press any key to turn back on. Your Brydge will enter sleep mode when both devices are closed like a laptop.
PAIR
TO PAIR: Press and hold the BluetoothTM key for three seconds until the LED flashes blue. On your iPad, under Settings > BluetoothTM select Brydge 10.2 MAX+. When successfully paired, the blue LED will turn off and your keyboard and trackpad will be active.
UPDATE FIRMWARE
Download Brydge Connect from the App Store for the latest firmware updates.
ATTACH PROTECTIVE CASE
REMOVE PROTECTIVE CASE
INSERT/REMOVE KEYBOARD
- IMPORTANT: Before attaching your keyboard, ensure your iPad is inserted into the supplied protective case.
- BEFORE INSERTING: Place your Brydge on a flat surface and set the hinges upright to 90 degrees.
- TO INSERT: Insert your iPad (in protective case) into the hinges with the home button on the left.
- TO REMOVE: Place your Brydge on a flat surface. Place your hand towards the back of the keyboard and pull up.
CHARGE
TO CHECK BATTERY LIFE: In Today View, go to the BATTERIES section to check
battery life. If not available, swipe left on your Home Screen to show Today
View, scroll to the bottom and click edit. Scroll down to Batteries, and click
the green ‘+’ icon to add.
NOTE: If battery life is below 15%, backlit key functionality will be
disabled to conserve battery.
TO CHARGE: Insert the charging cable into the keyboard and plug the other
end into a power source. A solid red LED indicates the Brydge is charging.
When the keyboard is fully charged, the red LED will turn off. A full charge
can take up to three hours.
KEYBOARD SHORTCUTS
- Copy: Command + C
- Paste: Command + V
- Home Screen: Command + H
- Switch App: Command + Tab
- Cut: Command + X
- Show Dock: Command + Option + D
- Underline: Command + U
- Search: Command + Space
- Italic: Command + I
- Undo: Command + Z
- Switch Language: Ctrl + Shift + Spacebar (Spacebar allows you to toggle through available languages)
WARRANTY
Thank you for purchasing a Brydge product. This product comes with a 1-year
limited hardware warranty on the terms and conditions set out in this document
and at www.brydge.com/warranty. All Brydge
warranties are non-transferrable and are only available to the original end-
user of the product. Warranties do not apply to products purchased from online
vendors unauthorized to sell Brydge-branded product. If a defect arises during
the warranty period, cease using the product and contact Brydge. To obtain
warranty service, visit
www.brydge.com/support or call +1
435-604-0481. Brydge, at its sole
discretion and option, will (1) repair the product at no charge using new
parts or parts that are equivalent to new in performance and reliability, or
(2) replace or exchange the product with a product of equivalent functionality
and value. Brydge offers free return shipping on any approved warranty claims.
A shipping label will be provided to you if you are within the United States.
If you are outside the United States, Brydge will reimburse your return
shipping to a maximum of US$15.00 after providing a copy of the shipping
receipt.
Australia Only: Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Brydge Technologies LLC | 1912 Sidewinder Dr., Suite 104, Park City, UT 84060
USA
HAVE A QUESTION? Visit www.brydge.com/support
References
- brydge.com/102-max-plus-instructions
- Brydge Customer Support - How can we help?
- Product Registration - Brydge Technologies