BRYDGE 10.2 MAX+ Wireless Keyboard Case with Trackpad User Manual
- June 5, 2024
- Brydge
Table of Contents
BRYDGE 10.2 MAX+ Wireless Keyboard Case with Trackpad
POWER
TO TURN ON: Press the power key for one second until the LED flashes green.
TO TURN OFF: Press and hold the power key for three seconds until the LED
flashes red
NOTE: The Brydge 10.2 MAX includes Instant-On””, which means that reconnecting
no longer takes seconds.
Once paired, your keyboard will instantly connect to your IPad for up to 4
hours before entering sleep mode Without impacting power consumption.
PAIR
TO PAIR: Press and hold the Bluetooth key for three seconds until the LED
flashes blue.
On your iPad, under Settings > Bluetooth select Brydge 10.2 MAX.
When successfully paired, the blue LED will turn off and your keyboard will be
active.
UPDATE FIRMWARE
DownlOad Brydge Connect from the App Store for the latest firmware updates.
ATTACH PROTECTIVE CASE
REMOVE PROTECTIVE CASE
INSERT/REMOVE THE KEYBOARD
IMPORTANT
Before attaching your keyboard, ensure your iPad is inserted into the Supplied
protective case.
BEFORE INSERTING: Place your Brydge on a flat surface and set the hinges
upright to 90 degrees.
TO INSERT: Insert your iPad (in a protective case) into the hinges with the home button on the right.
TO REMOVE: Place your Brydge on a flat surface. Place your hand towards the back of the keyboard and pull up.
CHARGE
TO CHECK BATTERY LIFE: In Today View, go to the BATTERIES section to check battery life. If not available, swipe left on your Home Screen to show Today View, scroll to the bottom and click edit. Scroll down to Batteries, and click the green + Icon to add.
NOTE: If battery life is below 15%, backlit key functionality will be
disabled to conserve battery.
TOCHARGE: INsert the charging cable into the keyboard and plug the other
end into a power source. A Solid red LED indicates the Brydge is charging.
When the keyboard is fully charged, the red LED will turn off. A full charge
can take up to three hours.
KEYBOARD SHORTCUTS
WARRANTY
Thank yOu for purchasing a Brydge product. The product Comes WIth an l-year
limited hardware warranty on the terms and conditions set out in this document
and at www.brydge.com/warranty. All Brydge
warranties are non-transferable and are only available to the original end-
user of the product. Warranties do not apply to products purchased from online
vendors unauthorized to sell Brydge-branded products. If a defect arises
during the warranty period, cease using the product and contact Brydge. To
obtain warranty service, visit
www.brydge.com/support or call +1
435-604-0481 Brydge, at its sole
discretion and option, Will () repair the product at no charge using new parts
or parts that are equivalent to new in performance and reliability, or (2)
replace or exchange the product with a product of equivalent functionality and
value. Brydge offers free return shipping on any approved warranty claims. A
shipping label will be provided to you if you are within the United States. If
you are outside the United States, Brydge will reimburse your return shipping
to a maximum of US$l500 after providing a copy of the shipping receipt,
Australia Only: Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure. Brydge Technologies LLC | 1912 Sidewinder Dr, Suite 104, Park
City. UT 84060 USA
HAVE A QUESTION? Visit www.brydge.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>