SP-5068 Spinnaker Hull Chronograph Instruction Manual

SP-5068 Spinnaker Hull Chronograph

Product Information

Specifications

• Movement: Japanese made Meca-Quartz
• Features: Battery regulated engine, mechanical chronograph module
• Water Resistance: Screw-down crown for water resistance

Product Usage Instructions

Using the Screw-down Crown
The screw-down crown is used to ensure water resistance. Follow these steps to use the crown:

1. Do NOT pull the crown unless it is UNSCREWED first.
2. To UNSCREW: Turn the crown anti-clockwise until it turns freely without tension.
3. Gently pull the crown out to the desired position for watch setting.
4. To SCREW: Push the crown ALL THE WAY IN (towards the watch) and then turn clockwise until it is securely screwed down.
5. NOTE: Failure to SECURELY screw down the crown after setting the watch may affect its water resistance.

Setting the Time

1. Unscrew the crown and pull it out to position [3] (2nd click).
2. Turn the crown clockwise to set the correct time, takinga.m./p.m. into consideration.
3. Push the crown in then screw it securely.
4. When the crown is at position [3], do not press any button,otherwise, the chronograph hands will move.

Setting the Date

1. Unscrew the crown and pull it out to position [2] (1st click).
2. Turn the crown clockwise to set the correct date.
3. Push the crown in then screw it securely.
4. Do not set the date between 9:00 P.M. and 3:00 A.M. If necessary, change the time to any time outside this period, set the date, and then reset the correct time.

Using the Screw-down Push Button

This watch is equipped with a screw-down push button. Follow these steps to operate the chronograph functions:

• The push button will not be able to be pressed until it is unscrewed.
• Unscrew the push button before operating the chronograph functions.
• The push button should be screwed back to its specified depth if it has been screwed down for water resistance or operated underwater.

Stopwatch Function

The watch features a stopwatch function for measuring elapsed time. Use the buttons on the watch to control the stopwatch:

• Press button A to start, stop, and restart the stopwatch for accumulated elapsed time measurement.
• Press button B to start, stop, and reset the stopwatch for standard measurement.

Stopwatch Hands Position Adjustment

If the stopwatch hands are not in the [0] position (12 o’clock position), follow these steps to set them to the correct position:

1. Refer to the specific operating instructions in the enclosed booklet or visit spinnaker-watches.com for detailed steps.

FAQ

Q: Where can I find more detailed instructions for operating this timepiece?
A: For more details on operating this timepiece, please refer to the enclosed booklet or visit spinnaker-watches.com.

MECA-QUARTZ CHRONOGRAPH
This timepiece is powered by a Japanese made “Meca-Quartz” movement.
It combines a battery regulated engine with a mechanical chronograph module. The result is a watch which delivers the meticulous pinpoint precision of a quartz movement along with the crisp, flyback handfeel and visual charm of mechanical watches.
For more details on operating this timepiece please refer to the enclosed booklet or visit: spinnaker-watches.com

For more infomation Pour plus d’informations Para más información Per maggiori informazioni Für mehr Informationen

PLEASE READ THE FOLLOWING

BEFORE UNSCREWING THE CROWN

Screw-down Crown
Screw-down crowns are used to ensure water resistance. ALWAYS be certain that your crown is securely screwed down (Position [0] is secured. Positions [1],[2] and [3] are not secured for water resistance ).
Do NOT unscrew your crown while you are in any environment where moisture is present.

USING THE SCREW-DOWN CROWN

Do NOT pull the crown unless it is UNSCREWED first:

• TO UNSCREW: Turn the crown anti-clockwise until it turns freely without tension. GENTLY pull the crown out to the other desired positions for watch setting (see specific operating instructions on the following pages).
• TO SCREW: Push the crown ALL THE WAY IN (towards the watch) THEN begin to turn clockwise until it is securely screwed down.

NOTE: Failure to SECURELY screw down the crown after setting the watch may affect its water resistance.

HOW TO SET THE TIME

1. Unscrew the crown and pull it out to position [3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in then screw it securely.

• Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
• When the crown is at the position [3], do not press any button, otherwise the chronograph hands will move.

HOW TO SET THE DATE

1. Unscrew the crown and pull it out to position [2]-(1st click).
2. Turn the crown clockwise to set the correct date.
3. Push the crown in then screw it securely.

Do not set the date between 9:00 P.M. and 3:00 A.M., otherwise the day may not change properly. If it is necessary to set the date during the time period, first change the time to any time outside it, set the date and then reset the correct time.

USING THE SCREW-DOWN PUSH BUTTON

This watch is equipped with screw-down push button. The push button will not be able to be pressed until the button are unscrewed.

To screw-down the button – turn the washer around the button clockwise until you encounter resistance.

To unscrew the button – turn the washer around the button anti-clockwise until it is at its maximum height away from the case.
You will only be able to operate the functions of the chronograph when the buttons are unscrewed.

• The watch is only water resistant as marked to its specified depth if the button has been screwed down
• Buttons must never be unscrewed or be operated underwater.

STOPWATCH FUNCTION

• This chronograph is able to measure and display time in 1/5 second united up to maximum of 59min 59sec.

STANDARD MEASUREMENT

ACCUMULATED ELAPSED TIME MEASUREMENT

• Restart and stop of the stopwatch can be repeated by pressing the button A.

STOPWATCH HANDS POSITION ADJUSTMENT

If the stopwatch hands are not in the [0] position (12 o’ clock position), follow the procedure below to set them to the [0] position.
If the stopwatch is in use, press the buttons in the following order to reset, and then, check if the hands return to [0] position.

• If the stopwatch is counting: A -> B
• If the stopwatch is stopped: B

If either of the stopwatch hands are not inthe [0] position, reset them following the procedure below.

1. Pull the crown to position [3]-(2nd click).

2. Press button B for two seconds and release the button to reset all stopwatch hands to [0] position.
   The stopwatch minute hand moves correspondingly with the stopwatch second hand.
   Tips: The hands move quickly if the respective buttons are kept pressed.

3. Push the crown in.

USING THE TACHYMETER

1. The most common use of a tachymeter is for measuring the approximate speed of a vehicle over a known distance.

(E.g.) Based on how many seconds it takes a vehicle to travel 1 km or 1 mile (the available measuring range is up to 60 seconds), the average speed within the distance can becalculated.

1. Start the chronograph when the vehicles commence travel.
2. After the vehicle has travelled 1 km/1 mile, stop the chronograph.
   The approximate average speed within the distance can be determined by observing the present position of the stopwatch second hand and reading the outer bezel.

WATER RESISTANCE

Note that the water resistance chart servesM only as a guide (please refer to the waterM resistance chart on the next page). ActualM water resistance may vary depending on a number of factors including water temperature, water salinity and use under water.
The water resistance of your timepiece may eventually be compromised over time with general wear and tear and use of your timepiece under adverse conditions.
Always remember to employ the screw down crown if available to maintain the water resistance of your timepiece. Warranty may be voided if the screw down crown has not been properly employed.
Note that you should NEVER wear your watch in a jacuzzi, hot shower or steam roomM where steam may enter the case despite the watertight seals used to protect your watch.
This may cause condensation inside your watch, which may affect and damage the inner workings of your watch.

Represented By: (for EU/UK)
Authorised Rep Compliance Ltd.,Ground Floor, 71 Lower Baggot Street,Dublin, D02 P593, Ireland.

WARNING

• INGESTION HAZARD: This product contains a button cell or coin battery.
• DEATH or serious injury can occur if ingested.
• A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
• KEEP new and used batteries OUT OF REACH of CHILDREN.
• Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>