bello BO299AMAUSAM Digital Belly Fat Scanner User Guide
- June 6, 2024
- bello
Table of Contents
Quick-Start Guide
|
---|---
http://m.site.naver.com/0FjgU| http://m.site.naver.com/0Fjiv
© 2021 Olive Healthcare Inc. All rights reserved.
Bello Mobile App Installation
iOS Users
-
Enter the App Store URL
https://apps.apple.com/app/id1485202681 -
Search App Stores by Keyword
Bello # Bello Decode
https://apps.apple.com/app/id1485202681
Android Users
-
Enter the App Store URL
https://play.google.com/store/apps/details?id=ohc.app.bello -
Search App Stores by Keyword
Bello # Bello Decode
https://play.google.com/store/apps/details?id=ohc.app.bello
Bello Bluetooth Pairing
- Sign up or log in on the Bello app. Once you enter your basic information and get to the “Connect your Bello” screen, turn on your device (ref. #03) and wait until it shows up on the app screen.
- All iOS/Android users have to click on the yellow “Connect” button and enter the 6-digit PIN Code “111111” on the pop-up screen.
- You are ready for your first scan when the LED checkmark appears on your Bello device and the app shows the “Scan upper belly” screen
Caution
All users have to enter a 6-digit PIN Code “111111” as stated above. Android
users will not be able to pair with their Bello device if they enter a 4-digit
code such as “0000”, “1111”, or “1234”. If you have multiple Bello devices
turned on near you, the device that is closest to you is usually shown at the
top of the device list.
Turning the device ON or OFF
1 . Turning the device ON
Press the top button 2 seconds to turn on the device. You will hear a “beep” sound and the device will stay on for approximately 3 minutes. The device will turn off automatically if not used.
2 Turning the device OFF
To turn off the device, press the same button for more than 3 seconds.
Caution
If you press and hold the top button down for 10 seconds for a factory reset,
all Bluetooth pairing data on the Bello device will be lost and users will
have to repeat the initial Bluetooth pairing process to connect to the Bello.
How to scan your belly fat
When the “Scan upper belly” screen appears on the app, place the Bello device one inch above your belly button and lightly tap the top button.
The measurement will take approximately 3 to 5 seconds and you will hear a
“beep”, indicating the upper belly scan is complete. Continue with “Scan lower
belly” in the same
manner. When the lower belly scan is completed, you will receive your scan
result.
Caution
Please hit the top button shortly. If you press and hold the top button for 2
to 3 seconds, the device is powered off.
FCC Statement
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1. This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are
not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter.
FCC Part 15.105
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void your
authority to operate the equipment under FCC rules.
Bello Inquiry
Three ways to send a Bello inquiry
1 Tap the Browse menu and hit Email us
Write your inquiry below your information. If you include some screenshots of the situation, we can resolve your inconvenience faster and more accurately.
2 Send Bello Inquiry directly to [email protected]
To assist your situation quickly and correctly, Bello’s inquiry should include some information as stated below:
- Bello account (Email)
- OS version
- Your inquiry
- Phone model
- Bello App version
- If you attach some screenshots, it would be helpful!
3 Visit the Bello website and fill out the Contact us form https://belloeveryday.com/contactus/ OR
https://belloeveryday.com/contactus/