TFA 14.1513.01 Hyper BBQ Smart Wireless BBQ Thermometer Instruction Manual

TFA 14.1513.01 Hyper BBQ Smart Wireless BBQ Thermometer

Thank you for choosing this instrument from TFA.
Before you use this product: Please make sure you read the instruction manual carefully.
The operating instructions are enclosed with the device or can be downloaded at
www.tfa-dostmann.de/en/service/downloads/instruction-manuals
This product should only be used as described within these instructions.

Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.
Please take particular note of the safety advice! Please keep this instruction manual safe for future reference.

Delivery contents

• Wireless BBQ Thermometer
• Two stainless steel probes with approx. 120 cm cable and cable wrap
• Heat isolation plate
• Wing nut and washer
• Instruction manual

Range of application and all the benefi ts of your new instrument at a glance:

• Thermometer for barbecue / grill / smoker/ smoker oven / grill cart

• With two stainless steel probes with approx. 120 cm cable

• For simultaneous monitoring of the cooking chamber temperature and the core temperature of a maximum of two BBQ cooking items

• Comfortable operation via smartphone with free app for iOS & Android™, range up to 50 metres (in free fi eld)

• Pre-programmed settings for different types of meat and doneness:
  Beef, veal, lamb, pork, chicken, turkey, fi sh, hamburger and smoke Well done, medium done, medium, medium rare and rare

• Individual target temperature or upper and lower limit can be set

• Backlit thermometer display, alternating between current and target temperatures

• Various alarm settings can be confi gured (on the thermometer and / or mobile device, signal and / or vibration, alarm interval)

• To be installed to the lid, as a spare part, for retrofi tting or for self-built Simply insert the stem through a pre-drilled hole and secure it with the nut from the inside

For your safety

This product is exclusively intended for the range of application described above. This product should only be used as described within these instructions. Unauthorized repairs, alterations or changes to the product are prohibited.
Caution!
Ris k of injury:

• Wear heat-resistant protective gloves when touching the probes during or after cooking.
• Be careful when handling the pointed probes. Store the device with its protective cap.
• Do not use the instrument in the microwave.
• Keep the devices and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fi re, short-circuited, taken apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking. Never use a combination of old and new batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries!

Important information on product safety!

• Caution! Attach the thermometer to the outside of the barbecue’s lid. Make sure your barbecue has a double-walled lid, otherwise heat can damage the thermometer. Use the heat insulation plate!
• Do not expose the thermometer to extreme temperatures, vibrations or shocks. Only the cooking chamber sensor (up to 400 °C) and the probes with handle and cable (up to 380 °C) are heat-resistant. Never hold the probes directly over a fi re.
• The thermometer and the probes are splashproof, but not watertight.
• Do not immerse in water. Not suitable for dishwasher.
• Do not leave the barbecue with the screwed-on thermometer unprotected in the open, but cover it with a water-repellent protective cover.

Elements

Thermometer
Fig.1-A – Control button

• ON/OFF
• Pair
• Alarm stop
• Backlight

Housing

• Fig.1-B – Battery compartment
• Fig.1-C – Temperature probe jacks with rubber protection covers
• Fig.2-D – Cooking chamber sensor

Fixi ng material

• Fig.2-E – Heat isolation plate
• Fig.2-F – Washer
• Fig.2-G – Screw nut

Display

• Fig.5-A – Wireless connection
• Fig.5-B – Battery symbol
• Fig.5-C – Temperature unit (°C/°F)
• Fig.5-D – Timer progress bar
• Fig.5-E – Target temperature /

Current temperature

• Fig.5-F – Alarm signal
• Fig.5-G – Temperature display
• Fig.5-H – Cooking chamber symbol
• Fig.5-J – Probe 1 + 2
• Fig.5-K – Mute

Probe

• Fig.3-H – Insertion probe
• Fig.3-J – Cable
• Fig.3-K – Probe connector
• Fig.3-L – Cable wrap

Getting started

Inserting the batteries in the thermometer

• Remove the protective film from the display.
• Open the battery compartment (Fig.1-B) on the back of the thermometer and insert two new batteries 1.5 V AAA. Make sure the polarities are correct. Close the battery compartment. The device will alert you with a beep, all LCD segments will be displayed and the backlight will turn on for a short moment. The device is ready for use.
• The current temperature, the cooking chamber symbol (Fig.5-H) and the battery symbol (Fig.5-B) appear on the display.

Connect the probes

• Pull off the rubber protection cover (Fig.1-C) carefully from the opening of the first probe on the left side of the thermometer. Plug the probe cable connector (Fig.3-K) into the jack (Fig.3-J).
• Repeat the process for the second probe.
• The display now alternately shows the current temperatures measured by the cooking chamber sensor, the insertion probe 1 and 2 (Fig.5-G).
• You can also operate the device with only one or without probe.

Mounting the thermometer on the barbecue lid (Fig.4)

• Make sure your barbecue has a double-walled lid, otherwise heat can damage the thermometer.
• The pre-drilled hole must have a diameter of 9 to 14 mm and a depth of 6 to 27 mm.
• Put the heat insulation plate (Fig.2-E) on the hole. The flat, longer side facing up. Now put the shaft through the hole and fix the thermometer on the back of the lid with the washer (Fig.2-F) and the screw nut (Fig.2-G).

Switch the devices off and on

• Press and hold the control button (Fig.1-A) for three seconds. The device is switched off.
• Press and hold the control button to turn the device back on.

IMPORTANT: To increase the life of the batteries, switch off the device after each use!

Download the app

• Download the free HyperBBQ app from the “Apple App Store” or “Google Play Store”.
• Make sure your mobile phone meets the following requirements:
  Compatible with iPhone 4S (or later), iPod touch 5th generation (or later), iPad 3rd generation (or later), iPad mini Android™ Smartphone 4.3 (or later).

Connect to the mobile device

• Start the app and follow the instructions on the screen to establish connection. Hold down the control button (Fig.1-A) for 3 seconds and switch on the thermometer.
• Briefly press the control button to pair.
• You do not have to repeat the pairing process for other applications unless you switch to another mobile device.

Google Play and the Google Play logo are trademarks of Google LLC. Android is a trademark of Google LLC.
Apple, Apple Watch, iPad, iPod, iPod touch, and iPhone, are trademarks of Apple Inc., registered in the U.S. and other coun-tries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

HyperBBQ App (Fig.6)
The app ‘s appearance can differ between iOS and Android™ and may change after an update. Please always follow the current instructions in the app.

• Fig.6-A – Options
• Fig.6-B – Connection status
• Fig.6-C – Duration
• Fig.6-D – Timer
• Fig.6-E – Photo function
• Fig.6-F – Current temperature probe 1 Fig.6-G – Probe 1 and 2 with selected
• Fig.6-H – Selected dish with target temperature
• Fig.6-J – Current temperature cooking chamber
• Fig.6-K – Cooking chamber sensor with selected colour marking
• Fig.6-L – Selected dish with lower/upper temperature limit
• Fig.6-M – Battery symbol for the thermometer
• Fig.6-N – Device settings

Temperature monitoring when cooking BBQ

• The device can be used to monitor the cooking chamber temperature in the barbecue and the core temperature of a maximum of two BBQ cooking items. Connect the two probes. For measuring the core temperature of meat, plunge the corresponding probe at least 2-3 cm into the middle of the thickest part of the meat; for poultry, between the torso and the thigh – it should not touch bones or cartilage and it should not protrude from the meat. The probe should remain in the meat throughout the cooking process.
• We recommend the clip for BBQ meat thermometers (Cat. No. 30.3525.60) to attach the temperature probe to the grill.
• Now simply run the cable to the outside. Close the lid again. Be careful with sharp-edged frames and hinges. Do not use the cable wrap in the grill!
• In the app, select the cooking chamber sensor and the two probes one after the other and choose your desired settings. Select a preset target temperature via the type of meat and the desired cooking level or enter an individual target temperature or an upper and lower limit. Different levels of doneness available depending on type of meat.
• The current temperatures and the target temperatures are shown in the app and alternately on the thermometer display.

Temperature alarm

• The alarm settings can be configured in the app.
• The alarm is activated on the thermometer and the app
  • as soon as the core temperature is reached
  • if the set upper temperature limit is exceeded
  • if the set lower temperature limit has fallen below when the timer has expired.
• Press the control button (Fig.1-A) on the thermometer to stop the alarm.
• The alarm is reactivated after a selectable interval as long as the alarm event exists.

Care and maintenance

• Clean the thermometer and the probes with a soft damp cloth. Do not use solvents or scouring agents. Do not immerse the devices in water.
• Should water or steam enter the device’s jack, it could affect the contact with the probe. Dry the probe connector with a cloth before connecting it to your thermometer.
• Turn off the device after use. Use the rubber protection covers for the jacks. Remove the batteries if the device will not be used for an extended period of time.

Battery replacement

• The charging status of the thermometer’s batteries is shown on a symbol with three bars (Fig.5-B, Fig.6-M).
• If only one segment is displayed, please change the batteries.

Troubleshooting

Ensure the batteries’ polarities are correct Change the batteries

Incorrect indication| Change the batteries

Check the contact between probe connector and jack, dry it if necessary

No contact between the thermometer and the app| Reduce the distance between the mobile device and the thermometer (max. 50 m in open field), Re-pair devices
Core temperature is too high/too low| Check the position of the probe in the meat

If your device fails to work despite these measures, contact the retailer where you purchased the product.

Specifications

• Dimensions for installation: Hole diameter: 9…14 mm

• Hole depth: 6…27 mm

• Measuring range probe: 0…300°C (32…572°F)

• Accuracy: ± 1% (0…99°C | 32…210°F)
  ± 2% (100…199°C | 212…390°F)
  ± 3% (200…300°C | 392…572°F)

• Measuring range cooking chamber sensor: 30…400°C (86…752°F)

• Accuracy: ± 2% (30…300°C | 86…572°F)
  ± 4% (301…400°C | 574…752°F)

• Resolution: 1°C

• Cable: appr. 120 m, heat resistant up to 380 °C

• Range: up to 30 m indoor up to 50 m in open field

• Protection class: Splashproof IP 64

• Power consumption: Batteries 2 x 1,5 V AAA (not included)

• Use alkaline batteries

• Housing dimension: 105 x 123 x 109 mm

• Weight: 241 g (device only)

• Transmission frequency: 2,4 GHz

• Maximum radio-frequency power: < 10dbm

• Compatibility: Compatible with iPhone 4S (or later),
  iPod touch 5th generation (or later),
  iPad 3rd generation (or later), iPad mini,

• Apple Watch
  Android™ Smartphone 4.3 (or later)

No part of this manual may be reproduced without the written consent of TFA Dostmann. The technical data are correct at the time of going to print and may change without prior notice. The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.

EU Declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 14.1513 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.tfa- dostmann.de/service/downloads/ce
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12
D-97877 Wertheim, Germany

References

• cat.no
• Testseite für dostmann.de
• ᐅ Messgeräte, die begeistern | TFA Dostmann
• EU-Konformitätserklärung | TFA Dostmann

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>