T-mark T1-6C GNSS Tracker User Manual
- June 10, 2024
- T-MARK
Table of Contents
T-mark T1-6C GNSS Tracker
Please read the manuals carefully before you use it, so as to get the correct installation and quick online activation. If the appearance and color of the product are changed, the object will prevail.
Product Information
The T1-6C GNSS Tracker is a device designed to track the location, fuel supply control, driving behavior analysis, and anomaly alert of vehicles. It has multi-GNSS capability and ACC detection to provide accurate and real-time location data. The device also has a smart power-saving feature and can detect anomalies such as vibration, overspeed, and power-off.
Features
- Fuel supply control
- Driving behavior analysis
- Multi-GNSS
- ACC detection
- Location data re-upload
- Smart power saving
- Anomaly alert (vibration, over-speed, power-off, etc.)
Operating Environment
- Operating voltage: 12-90VDC
- Internal backup battery: 3.7V/150mAH battery
- Operating current: 22mA @12V
- Standby current: 5mA @12V
- Operating temperature: -20 to 60
- Storage temperature: -40 to +85
- Positioning accuracy
Product Usage
Please read the user manual carefully before using the T1-6C GNSS Tracker. Follow the instructions below for correct installation and quick online activation:
- Connect the device to the vehicle’s power supply with an operating voltage range of 12-90VDC.
- Ensure that the device is properly installed and securely attached to the vehicle.
- Activate the device online as per the instructions in the user manual to start using it.
- Check the device regularly for location data and anomaly alerts.
- In case of any issues or queries, refer to the user manual or contact customer support.
Introduction
Features
- Fuel supply control
- Driving behavior analysis
- Multi-GNSS
- ACC detection
- Location data re-upload
- Smart power saving
- Anomaly alert (vibration, over-speed, power-off, etc.)
Operating Environment
- Operating voltage: 12-90VDC
- Internal backup battery: 3.7V/150mAH battery
- Operating current: 22mA @12V
- Standby current: 5mA @12V
- Operating temperature: -20℃ to 60℃
- Storage temperature: -40℃ to +85℃
- Positioning accuracy: <10m
- Location modes: GPS, BDS, AGPS, and LBS
Frequency Bands
- GSM: B2/B3/B5/B8
Overview
Appearance
Connotations of Indicators
GNSS indicator (Blue)
- Fast flashing: The device is searching for satellite signals.
- Keep on: The GNSS module is already fixed a position.
- Off: Device is in sleep mode or not operating.
Network indicator (Green)
- Fast flashing: The network in searching
- Slow flashing: The network signal is normal
- Keep on: The device online
- Off: Device is in sleep mode or not operating
_ Note: _By default, when the device is stationary for 3 minutes, the LED will automatically turn off and wake up after a vibration.
Installation
Inserting the SIM Card
- Step 1: Prepare a proper SIM card;
- Step 2: Insert the SIM.
After the SIM card is inserted, the device powers on using the backup battery. If the device fails to power on due to low battery, you can connect the device to the external power.
Note: The SIM card must be inserted correctly, has GPRS services activated, and is not in arrears. If the SIM is identified and requires a PIN, please disable the PIN request.
Installing the Device
Product wiring diagram
- Use a multimeter to find out the positive and negative terminals of the vehicle battery and the ACC line.
- Connect the red wire (positive)of the device configuration power cable to the positive terminal of the vehicle battery.
- Plug in the connector as shown in the figure below.
Car mounting position
Electric car installation location
Motorcycle installation position
Product Features
| Content | Function | Description |
|---|
Positioning function
| ****
Timed tracking
| Transmit back the positioning information
such as latitude and longitude according to the set interval time.
Street map| 360-degree high-definition map
Speeding
alarm
| When driving over speed, the locator will
send alarm to your cell phone
Vibration alarm| Built-in vibration sensor, continuous vibration of the
vehicle, the device will immediately send alarm alerts
Electronic fence| When the car driving range exceeds the specified area, the
platform will send alarm information
History track
| Can play back 90 days of the track, playback the speed, direction, stay time and other content
Displacement alarm
| When the vehicle encounters illegal operation or theft, the fuel and
electricity can be cut off remotely by computer or cell phone APP
Fleet
management
| 1 cell phone can manage multiple devices, or
1 device multiple cell phone management
Analysis of common problems
| Failure phenomenon | Failure analysis | Treatment method |
|---|
Blue light flashes slowly
| Determine whether to use the terminal in areas with poor GPS signals, such
as near tall buildings or underground parking lots| Move the vehicle to a
location with a good signal Use the terminal
Determine whether the front windshield of the vehicle has metal heat
insulation film affecting the signal reception| If there is a film, the
equipment will be changed to other vehicles to test whether the blue light is
always on, such as in other vehicles without film to test no problem, then the
vehicle is caused by the film
Determine whether there is a shield or signal jammer on or around the car| If
there is a shield or source of interference, remove the shield or source of
interference and try to reinstall
Blue light flashing fast| Chip failure| Return to factory for repair
Yellow light is flashing fast
| Determine whether the SIM card is installed properly| Check whether the SIM
card is installed in place
Determine if there is dirt or poor contact on the metal surface of the SIM
card| Wipe the metal chip surface with a clean cloth or repeatedly insert and
remove the card several times
The yellow light flashes slowly.
| Determine if the vehicle is in a place with no mobile network, such as an
underground parking lot.| Please drive the vehicle to a place with good
network signal and try to reinstall it.
Determine whether the server background is normal| Ask if the server of the
background management platform is normal
Determine whether the SIM card status is normal or not| Check whether the
status of the SIM card is normal through the SIM card inquiry platform
Determine whether there is a shield or signal interferer on the car or around|
If there is a shield or source of interference, remove the shield or source of
interference and try to reinstall