dji PROSSD Mount Device User Guide
- June 6, 2024
- DJi
Table of Contents
dji PROSSD Mount Device
OVERVIEW
Disclaimer and Warning
Congratulations on purchasing your new DJI OSMOTM product. Please read this entire document and all safe and lawful practices DJI OSMO provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI OSMO product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree to use this product only for purposes that are proper. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. DJI OSMO accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product. DJI is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as “DJI OSMO”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI OSMO with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI OSMO. This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO. For up-to-date product information, visit http://www.dji.com and click on the product page for this product. This document is available in various languages. In the event of divergence among different versions, the English version shall prevail.
Introduction
The DJI PRO SSD Mount enables users to install the DJI PRO SSD 1TB External SSD to a DJI Ronin 4D and record video in ProRes RAW or 8K resolution.
Usage
- Open the CFexpress card compartment cover, press the clip inside, and remove the cover. (Figure A)
- Locate the mark on the CFexpress card plug and insert it into the card slot of Ronin 4D based on the direction of the mark. (Figure B)
- Remove the two M2×5 screws on Ronin 4D, align the PRO SSD Mount with the screw holes, and attach using the M2×22 screws included with the PRO SSD Mount. (Figure C)
Specifications
Dimensions 87×42.5×29.5 mm
Weight 53.5 g
Please refer to http://www.dji.com/service for after-sales service for your product where applicable. DJI OSMO shall mean SZ DJI OSMO TECHNOLOGY CO., LTD. and/or its affiliated companies where applicable.