BOCCI 22.6.6L Double 20A Long Barrel Instruction Manual
- June 6, 2024
- BOCCI
Table of Contents
BOCCI 22.6.6L Double 20A Long Barrel Instruction Manual
36.5 (1.44”)
RECEPTACLES: two long barrel 22.3.8L tamper resistant 20A 120V outlets
MOUNTING 22.2.6
INSTALLATION: drilled and mounted behind rigid material
MATERIALS: polycarbonate casing, electrical components
CONFIGURATION: double random outlets
INPUT / OUTPUT: 125V AC, 60Hz – 20A
DESCRIPTION
The 22.6.6L is an assembly of two 22.3.8L tamper resistant 20A outlet for an
installation in materials other than drywall using the 22.2.6 double random
alternate mounting plate.
The 22 system is a complete suite of interior surface accessories that
challenge the traditional, tired and ubiquitous cover plate concept. The 22 is
designed to “mud” directly into drywall without a visible cover plate
or trim. Alternatively, it may be set fl ush into millwork, marble, glass or
any other surface. 22 operative components include: power outlets, data &
communication, telephone receptacles, cable and HDMI connectors, line voltage
on/off switches, keypad controls, and USB.
APPLICATIONS
The 22.6.6L is designed to be used on surfaces other than drywall – for example: millwork, glass, stone, etc.
NOTES
+ For use with a standard depth junction box.
+ The 22 system is a departure from conventional cover plate systems, and
requires precise and skilled craftsmanship during installation. If you have
never installed a 22, Bocci recommends a practice installation.
+ Purchase additional components at www.bocci.com/shop/22
+ Please see our installation fi lms on
www.bocci.com/22-series/22-alternativeinstallation.
Worldwide utility patents pending
US Patent # 7,956,295 B2 & 8,912,439 B2
Made in Vancouver, Canada
Vancouver Berlin
sales@bocci.com europe@bocci.com
www.bocci.com www.bocci.com
-
Recess and install the junction box 35mm (1.38”) away from fi nished wall surface.
-
Put the wiring through the junction box. Insert the operative components into the cover plate then make all necessary electrical connections.
-
Connect the wires according to the wiring diagram below using appropriately sized marettes. Mount the cover plate to the junction box using screws provided.
NOTE: 22 tamper-resistant receptacles use 14GA (2.08mm) wire for 15A output and 12GA (2.63mm) wire for 20A output..Best practice statement: For ease of future access or maintenance, we recommend a single incoming wire to the junction box (no J-box splices) immediately behind the 22 receptacles. -
Use the drawing below to measure the drill hole locations in your fi nish material. The recommended reveal size is 36.5mm (1.44”) diameter (1-7/16” bit size).
-
For wall materials thicker than 32mm (1.25”), the wall material needs to be modifi ed to install the plate at 32mm (1.25”) depth for the use of long barrel.
-
For plaster, mortar, tile, concrete, etc. use the trim cap (22.4) to block the face of the operative components to create the necessary reveal.
-
Install fi nish material, remove trim cap (22.4).
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>