vestfrost VIF 11177 S NoFrost Freezer User Manual

June 6, 2024
vestfrost

User Manual
Freezer

VIF 11177 S NoFrost

****BRAND
Advarsel: Risiko for brand

BEFORE USING THE APPLIANCE

SAFETY INSTRUCTIONS

1.1 General Safety Warnings
Read this user manual carefully.
WARNING : Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING : Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING : Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
WARNING : Do not damage the refrigerant circuit.
WARNING : When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING : Do not locate multiple portable socket outlets or portable power supplies at the rear of the appliance.
WARNING : In order to avoid any hazards resulting from the instability of

BEFORE USING THE APPLIANCE
the appliance, it must be fixed in accordance with the instructions.
If your appliance uses R600a as a refrigerant (this information will be provided on the label of the cooler) you should take care during transportation and installation to prevent the cooler elements from being damaged. R600a is an environmentally friendly and natural gas, but it is explosive. In the event of a  leak due to damage of the cooler elements, move your fridge away from open flames or heat sources and ventilate the room where the appliance is located for a few minutes.

  • While carrying and positioning the fridge, do not damage the cooler gas circuit.

  • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

  • This appliance is intended to be used in household and domestic applications such as:
    – staff kitchen areas in shops, offices, and other working environments.
    – farmhouses and by clients in hotels, motels, and other residential type environments.
    – bed and breakfast type environments;
    – catering and similar non-retail applications.

  • If the socket does not match the refrigerator plug, it must be replaced by the manufacturer, a service agent or similarly qualified persons in order to avoid a hazard.

  • A specially grounded plug has been connected to the power cable of your refrigerator. This plug should be used with a specially grounded socket of 10 amperes. If there is no such socket in your house, please have one installed by an authorized electrician.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with
    the appliance. Cleaning and user maintenance shall not be made by children without supervision.

  • Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances. Children are not expected to perform cleaning or user maintenance of the appliance,  very young children (0-3 years old) are not expected to use appliances, young children (3-8 years old) are not expected to use appliances safely unless continuous supervision is given, older children (8-14 years old) and vulnerable people can use appliances safely after they have been given appropriate supervision or instruction
    concerning use of the appliance. Very vulnerable people are not expected to use appliances safely unless continuous supervision is given.

  • If the supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or similarly qualified persons, in order to avoid a hazard.

  • This appliance is not intended for use at altitudes exceeding 2000 m. To avoid contamination of food, please respect the following instructions:

  • Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.

  • Clean regularly surfaces that can come in contact with food and accessible drainage systems

  • Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.

  • Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice cream, and making ice cubes.

  • One-, two- and three-star compartments are not suitable for the freezing of fresh food.

  • If the refrigerating appliance is left empty for long periods, switch of defrosting, clean, dry, and leave the door open to prevent mold from developing within the appliance.

Old and out-of-order fridges or freezers

  •  If your old fridge or freezer has a lock, break or remove the lock before discarding it, because children may get trapped inside it and may cause an accident.

  • Old fridges and freezers may contain isolation material and refrigerant with CFC or HFC. Therefore, take care not to harm the environment when you are discarding your old fridges or freezers.
    Please ask your municipal authority about the disposal of the WEEE reuse, recycling, and recovery purposes. Notes:

  • Please read the instruction manual carefully before installing and using your appliance. We are not responsible for the damage that occurred due to misuse.

  • Follow all instructions on your appliance and instruction manual, and keep this manual in a safe place to resolve the problems that may occur in the future.

  • This appliance is produced to be used in homes and it can only be used in domestic environments and for specified purposes. It is not suitable for commercial or common use. Such use will cause the guarantee of the appliance to be canceled and our company will not be responsible for losses incurred.

  • This appliance is produced to be used in houses and it is only suitable for cooling / storing food. It is not suitable for commercial or common use and/or for storing substances except for food. Our company is not responsible for losses to be incurred in the contrary case.

Safety warnings

vestfrost VIF 11177 S NoFrost Freezer

  • Do not connect your Freezer to the mains electricity supply using an extension lead.

  • Do not plug in damaged, torn or old plugs.

  • Do not pull, bend or damage the cord.
    vestfrost VIF 11177 S NoFrost Freezer - electricity

  • This appliance is designed for use by adults, do not allow children to play with the appliance or let them hang off the door.

  •  Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.

  • Do not place glass bottles or beverage cans in the ice-making compartment as they can burst as the contents freeze.

  • Do not place explosive or flammable material in your freezer.
    Place drinks with high alcohol content vertically in the freezer compartment and make sure that their tops are tightly closed.

  • When removing ice from the ice-making compartment, do not touch it. Ice may cause frost burns and/or cuts.

  • Do not touch frozen goods with wet hands! Do not eat ice cream and ice cubes immediately after you have taken them out of the freezer!

  • Do not touch frozen goods with wet hands. Do not eat ice cream or ice cubes immediately after you have taken them out of the ice-making compartment.

  • Do not cover the body or top of the freezer with lace. This affects the performance of your freezer.

  • Secure any accessories in the freezer during transportation to prevent damage to the accessories.

  • Do not use a plug adapter

Installing and operating your freezer
Before starting to use your freezer, you should pay attention to the following points:

  • The operating voltage for your freezer is 220-240 V at 50Hz.

  • The plug must be accessible after installation.

  • Your freezer may have a smell when it is operated for the first time. This is normal and the smell will fade away when your freezer starts to cool.

  • Before connecting your freezer, ensure that the information on the data plate (voltage and connected load) matches that of the mains electricity supply. If in doubt, consult a qualified electrician.

  • Insert the plug into a socket with an efficient ground connection. If the socket has no ground contact or the plug does not match, we recommend that you consult a qualified electrician for assistance.

  • The appliance must be connected with a properly installed fused socket. Power supply (AC) and voltage at the operating point must match with the details on the nameplate of the appliance (nameplate is located on the inside left of the appliance).

  • We do not accept responsibility for any damages that occur due to ungrounded usage.

  • Place your freezer where it will not be exposed to direct sunlight.

  • Your freezer should never be used outdoors or exposed to rain.

  • Your appliance should be at least 50 cm away from stoves, gas ovens and heater cores, and at least 5 cm away from electrical ovens.

  • When your freezer is placed next to a deep freezer, there should be at least 2 cm between them to prevent humidity from forming on the outer surface.

  • Do not place heavy items on the appliance.

  • Clean the appliance thoroughly, especially the interior, before use (see Cleaning and Maintenance).

  • The installation procedure into the kitchen unit is given in the Installation Manual. This product is intended to be used in proper kitchen units only.

  • Before using your freezer, wipe all parts with a solution of warm water and a teaspoon of sodium bicarbonate, then rinse with clean water and dry. Place all parts in the freezer after cleaning.

Before using your freezer

  • When using your freezer for the first time, or after transportation, keep it in an upright position for at least 3 hours before plugging into the mains. This allows efficient operation and prevents damage to the compressor.
  • Your freezer may have a smell when it is operated for the first time. This is normal and the smell will fade away when your freezer starts to cool.

Information on No-Frost technology
No-frost freezers differ from other static freezers in their operating principle.
In normal freezers, the humidity entering the freezer due to opening the door and the humidity inherent in the food causes freezing in the freezer compartment. To defrost the frost and ice in the freezer compartment, you are periodically required to turn off the freezer, place the food that needs to be kept frozen in a separately cooled container and remove the ice gathered in the freezer compartment. The situation is completely different in no-frost freezers. Dry and cold air is blown into the fridge and freezer compartments homogeneously and evenly from several points via a blower fan. Cold air dispersed homogeneously and evenly between the shelves cools all of your food equally and uniformly, thus preventing humidity and freezing. Therefore your no-frost freezer allows you the ease of use, in addition to its huge capacity and stylish appearance.vestfrost VIF 11177 S NoFrost Freezer -
technology

THE PARTS OF THE APPLIANCE AND THE COMPARTMENTS

vestfrost VIF 11177 S NoFrost Freezer - COMPARTMENTSThis presentation is only for information about the parts of the appliance. Parts may vary according to the appliance model.

  1. Control panel
  2. Freezer upper room cover
  3.  Freezer compartment drawers/freezer room cover *
  4. Freezer compartment drawers
  5.  Ice magic *
  6. Ice cube tray*
  7.  Freezer LED strip *
  8. No Frost air circulation system

In some models

General notes:
Freezer Compartment (Freezer): Most Efficient use of energy is ensured in the configuration with the drawers and bins are on stock position.

Dimensionsvestfrost VIF 11177 S NoFrost Freezer -
Dimensions

USAGE INFORMATION

Display and Control Panel

Using the Control Panel

  1. Alarm indicator
  2. Freezer set value screen.
  3. Super Freeze mode indicator
  4. It enables the setting value of the freezer to be modified and super freeze mode to be activated if desired. Freezer may be set to -16, -18, -20, -22, -24°C super freeze.
  5.  It enables the economy mode to be activated if desired.
  6. Eco mode indicator

If your product has lighting
When the product is plugged in for the first time, the interior lights may turn on 1 minute late due to opening tests.
Operating Your Freezer
Super Freeze Mode
How Would It Be Used?vestfrost VIF 11177 S NoFrost Freezer -
button

Press the freezer set button (#4 on the control panel diagram) until the Super freeze symbol (#3) will be seen on the screen. The buzzer will sound beep beep. The mode will be set.
During This Mode:

  • An economy mode can not be selected.
  • Super freeze mode can be canceled by the same operation of selecting.
    Note: This option shall be turned on 24 hours before placing the fresh food to the freezer. After 54h, it returns to the normal set value.

USAGE INFORMATION

Economy Mode

vestfrost VIF 11177 S NoFrost Freezer - control

How Would It Be Used?

  • Push the “MODE” button (#5 on the control panel diagram) until the eco symbol appears.

  • If no button is pressed for 1 second. The mode will be set. Eco symbol (#6) will blink 3 times. When the mode is set, the buzzer will sound beep beep.

  • Freezer temperature segments (#2) will show “E”.

  • Economy symbol and E will light till mode finishes.
    During This Mode:

  • The freezer may be adjusted. When economy mode will be canceled, the selected setting values will proceed.

  • Super freeze mode can be selected. Economy mode is automatically canceled and the selected mode is activated.

  • To cancel, you will just need to press on the mode button.
    Screen Saver Mode
    Purpose
    This mode saves energy by switching off all control panel lighting when the panel is left inactive.
    How to Use

  • Screen saver mode will be activated automatically after 30 seconds.

  • If you press any key while the lighting of the control panel is off, the current machine settings will reappear on the display to let you make any change you wish.

  • If you do not cancel the screen saving mode or press any key for 30 seconds, the control panel will remain off.
    To deactivate the screen saving mode,

  • To cancel the screen saving mode, first of all, you need to press any key to activate the keys and then press and hold the Mode button **"M "** (#5) for 3 seconds.

  • To reactivate screen saving mode, press and hold the mode button “**M "**(#5) for 3 seconds.

Door Open Alarm Function
If the freezer door is opened for more than 2 minutes, the appliance sounds ‘beep beep’.
Temperature Settings
Freezer Temperature Settings

  • The initial temperature value for the freezer setting indicator is -18°C.

vestfrost VIF 11177 S NoFrost Freezer - indicator

  • Press the set freezer button once (#4 on control panel diagram).
  • When you first push this button, the last set value will blink on the screen.
  • Whenever you press this button, a lower temperature will be set (-16°C, -18°C, -20°C, -22°C, -24°C, super freeze).
  • When you push the set freezer button until the super freeze symbol (#3) appears, and if you do not push any other button within 1 second, the super freeze will flash.
  • If you continue to press it, it will restart from -16°C.
  • The temperature value selected before super freeze mode or economy mode is activated and will remain the same when the mode is over or canceled. The appliance continues to operate with this temperature value.

Recommended Temperature Values for Freezer

When to adjust Inner Temperature ( o C)
For minimum freezing capacity -16, -17
In normal usage -18, -19, -20, -21
For maximum freezing capacity. -22, -23, -24

Warnings about temperature adjustments

  • Do not pass to another adjustment before completing an adjustment
  • Temperature adjustments should be made according to the frequency of door openings, the quantity of food kept inside the freezer, and the ambient temperature of the place of your freezer.
  • Your freezer should be operated up to 24 hours according to the ambient temperature without interruption after being plugged in to be completely cooled.
  • Do not open the doors of your freezer frequently and do not place much food inside it in this period.
  • A 5-minute delaying function is applied to prevent damage to the compressor of your freezer, when you take the plug off and then plug it on again to operate it or when an energy breakdown occurs. Your freezer will start to operate normally after 5 minutes.
  • Your freezer is designed to operate in the ambient temperature intervals stated in the standards, according to the climate class stated in the information label. We do not recommend operating your freezer out of stated temperatures value limits in terms of cooling effectiveness.
  • This appliance is designed for use at an ambient temperature within the 10°C – 43°C range.

Climate class and meaning:
T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging from 10 °C to 32 °C.

Accessories
Making ice cubes
Ice cube tray (In some models)

  •  Fill the ice tray with water and place in the freezer compartment.

  • After the water has completely turned into ice, you can twist the tray as shown below to remove the ice cubes.
    vestfrost VIF 11177 S NoFrost Freezer - Ice
    Icematic (In some models)

  • Take out the ice-making tray

  • Fill the water to the line.

  • Place the ice making tray in its original position

  • When ice cubes are formed, twist the lever to drop ice cubes into the icebox.
    vestfrost VIF 11177 S NoFrost Freezer - Icematic

Note :

  • Do not fill the icebox with water to make ice. This may damage it.
  • The movement of the ice maker may be difficult while the freezer is running.
    In such a case it should be cleaned by removing the glass shelves. Removing the Icemaker

Remove the freezer glass shelves

  • Remove the icemaker by pulling left or right on the shelf.
    You can remove the icemaker to increase the available volume in the freezer compartment.

vestfrost VIF 11177 S NoFrost Freezer - the ice maker

Visual and text descriptions on the accessories section may vary according to the model of your appliance.

ARRANGING FOOD IN THE APPLIANCE

  • Use your freezer to keep frozen food for a long time and to produce ice.

  • Do not place food you want to freeze next to frozen food.

  • You should freeze your food (meat, minced meat, fish etc) in portions that allow consuming in a time.

  • Do not put fresh and warm food with frozen food side by side as it can thaw the frozen food.

  • While freezing fresh food (i.e. meat, fish and mincemeat) divide them in parts in order to use in one time.

  • For storing the frozen food; the instructions shown on frozen food packages should always be followed carefully and if no information is provided, food should not be stored for more than
    3 months from the purchased date.

  • Maximum load; if you want to load large quantities and use the maximum net capacity, you can remove the drawers (Except the bottom one). You can store bulky items directly on the shelves.

  • When buying frozen food ensure that these have been frozen at suitable temperatures and that the packing is intact.

  • Frozen food should be transported in appropriate containers to maintain the quality of the food and should be returned to the freezing surfaces of the unit in the shortest possible time.

  • If a package of frozen food shows the sign of humidity and abnormal swelling it is probable that it has been previously stored at an unsuitable temperature and that the contents have deteriorated.

  • The storage life of frozen food depends on the room temperature, thermostat setting, how often the door is opened, the type of food and the length of time required to transport the product from the shop to your home. Always follow the instructions printed on the package and never exceed the maximum storage life indicated.

If you would freeze about 3 kg food in your freezer:

  • You can place your food without touching other frozen food and activate “Fast Freezing” mode. You can put your food next to other frozen food after they are frozen (after minimum 24 hours).
  • Do not re-freeze the frozen goods after being melted. This may cause health issues like food poisoning.
  • Do not place hot food to the freezer before cooling them. This may cause the spoiling of food frozen before in the freezer.
  • When you are buying frozen food, make sure that they frozen in proper conditions and the package is undamaged.
  • Follow the instructions for storing conditions on the package of the frozen food while storing them. If there is no explanation, food must be consumed in a short time.
  • If the package of frozen food is humid and smells bad, it may be stored under inappropriate conditions and spoiled. Do not buy this kind of food!
  • Storing time for frozen food may differ according to the ambient temperature, frequency of door openings, thermostat adjustments, type of food and the time between the buying of the food and placing of the food in the freezer. Always follow instructions on the package and do not exceed storing period.

CLEANING AND MAINTENANCE

  • Disconnect the unit from the power supply before cleaning.

  • Do not clean the appliance by pouring water

  • Make sure that no water enters the lamp housing and other electrical components.

  • The freezer should be cleaned periodically using a solution of bicarbonate of soda and lukewarm water.
    vestfrost VIF 11177 S NoFrost Freezer - dishwasher.

  • Clean the accessories separately with soap and water Do not clean them in the dishwasher.
    vestfrost VIF 11177 S NoFrost Freezer - abrasive

  • Do not use abrasive products, detergents or soaps. After washing, rinse with clean water and dry carefully. When you have finished cleaning, reconnect the plugto the mains supply with dry hands.

  • Clean the condenser with a broom at least twice a year. This will help you to save on energy costs and increase productivity.

THE POWER SUPPLY MUST BE DISCONNECTED.

Defrosting
Your freezer defrosts automatically. Water produced by defrosting flows to evaporating container passing through water collecting groove, and vaporizes here by itself.

Replacing the LED strip
1 led strip in the freezer is used to illuminate your appliance. Please call the serviceman.
Note : Numbers and location of led strips may be changed according to the model.
!!! Some versions may be without illumination.

SHIPMENT AND REPOSITIONING

Transportation and changing of the installation position

  • The original packages and foamed polystyrene (PS) can be retained if required.
  • During transportation, the appliance should be secured with a wide string or a strong rope. The instructions written on the corrugated box must be followed while transporting.
  • Before transporting or changing the installation position, all the moving objects (ie, drawer, Ice trays, …) should be taken out or fixed with bands in order to prevent them from getting damaged. Carry your freezer in the upright position.

BEFORE CALLING YOUR AFTER-SALES SERVICE

If your freezer is not working properly, it may be a minor problem, therefore check the following, before calling an electrician to save time and money.

ERROR TYPE MEANING WHY WHAT TO DO
0.00E+00 Sensor warning Call Service for assistance as soon as possible.
0.00E+00 Sensor warning Call Service for assistance as soon as possible.
0.00E+00 Sensor warning Call Service for assistance as soon as possible.
0.00E+00 Sensor warning Call Service for assistance as soon as possible.
0.00E+00 Sensor warning Call Service for assistance as soon as possible.
0.00E+00 Low Voltage Warning Power supply to the device has dropped to below
170W. – This is not a device failure. this error helps to prevent damages to

the compressor.
– The voltage needs to be increased back to the required levels
If this warning continues an authorized technician needs to be contacted.
0.00E+00| Freezer compartment is not cold enough| Likely to occur after long- term power failure.| 1.Set the freezer temperature to a colder value or set
Super Freeze. This should remove the error code once the required temperature has been reached. Keep doors closed to improve the time taken to reach the correct temperature.
2. Remove any products which have thawed/defrosted during this error. They can be used within a short period of time.
3.Do not add any fresh produce to the freezer compartment until the correct temperature has been reached and the error is no longer.
If this warning continues an authorized technician needs to be contacted.

What to do if your appliance does not operate; Check that;

  • There is no power,
  • The general switch in your home is disconnected,

BEFORE CALLING YOUR AFTER-SALES SERVICE

  • The socket is not sufficient. To check this, plug in another appliance that you know is working into the same socket.
    What to do if your appliance performs poorly; Check that;

  • You have not overloaded the appliance,

  • The freezer temperature set to -16.

  • The doors are closed perfectly,

  • There is no dust on the condenser,

  • There is enough place at the rear and sidewalls.
    If your freezer is operating too loudly; Normal Noises
    Cracking (Ice cracking) Noise:

  • During automatic defrosting.

  • When the appliance is cooled or warmed (due to expansion of appliance material).
    Short cracking: Heard when the thermostat switches the compressor on/ off.
    Compressor noise : Normal motor noise. This noise means that the compressor operates normally Compressor may cause more noise for a short time when it is activated.
    Bubbling noise and splash: This noise is caused by the flow of the refrigerant in the tubes of the system.
    Water flow noise: Normal flow noise of water flowing to the evaporation container during defrosting. This noise can be heard during defrosting. Air Blow Noise: Normal fan noise. This noise can be heard in the No-Frost freezer during the normal operation of the system due to the circulation of air.
    If the edges of the freezer cabinet that the door joint contact is warm;
    Especially in summer (hot weather), the surfaces that the joint contact may get warmer during the operation of the compressor, this is normal.
    If humidity builds up inside the freezer;

  • Is all food packed properly?
    Are the containers dried before placing them in the freezer?

  • Is the freezers door opened frequently? The humidity of the room gets in the freezer when the doors are opened. Humidity build-up will be faster when you open the doors more frequently, especially if the humidity of the room is high.
    If the door is not opened and closed properly;

  • Do the food packages prevent the closing of the door?

  • Are the drawers placed properly?

  • Are door joints broken or torn?

  • Is your freezer on a level surface?

Recommendations

  • To stop the appliance completely, unplug from the main socket (for cleaning and when the door is left open)
    Tips for saving energy
  1.  Install the appliance in a cool, well-ventilated room, but not in direct sunlight and not near a heat source (radiator, cooker.. etc). Otherwise use an insulating plate.

  2.  Allow warm food and drinks to cool down outside the appliance.

  3. Cover drinks or other liquids when placing them in the appliance Otherwise humidity increases in the appliance. Therefore, the working time gets longer.
    Also covering drinks and other liquids helps to preserve smell and taste.

  4. Try to avoid keeping the doors open for long periods or opening the doors too frequently as warm air will enter the cabinet and cause the compressor to
    switch on unnecessarily often.

  5.  Keep the covers of the different temperature compartments (crisper, chiller …etc ) closed

  6.  The door gasket must be clean and pliable. Replace gaskets if worn.

TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance.
See the link www.theenergylabel.eu for detailed information about the energy label.

INFORMATION FOR TEST INSTITUTES

Appliance for any EcoDesign verification shall be compliant with EN 62552.
Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual at. Please contact the manufacturer for any other further information, including loading plans.

CUSTOMER CARE AND SERVICE

Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, Serial Number and Service Index. The information can be found on the rating plate. Subject to change without notice.
The original spare parts for some specific components are available for a minimum of 7 or 10 years, based on the type of component, from the placing on the market of the last unit of the model. Visit our website: www.eico.dk 52320324

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

vestfrost User Manuals

Related Manuals