DENSO FN01060 Smart Key FOB Instruction Manual
- June 6, 2024
- DENSO
Table of Contents
DENSO FN01060 Smart Key FOB Instruction Manual
Description of manufacturer
Trade mark
: N/A
Name and address of manufacturer
- Name : DENSO KOREA CORPORATION
- Address : 3, Cheomdansaneop-ro, Masanhappo-gu, Changwon-si, Gyungsangnam-do, Korea
Name and address of applicant
- Name : DENSO KOREA CORPORATION
- Address : 3, Cheomdansaneop-ro, Masanhappo-gu, Changwon-si, Gyungsangnam-do, Korea
Technical description of Smart Key FOB
Type
- Model : FN01060
Specifications of Electronic Key
- Nominal frequency : 433.92MHz
- Oscillator frequency (IC clock) : 16MHz
- Oscillator frequency (RF clock) : 27.6MHz
- Type of modulation : FSK/F1D
- Power Supply
- Nominal supply voltage : 3 VDC
- Type of Battery : One lithium battery
- Antenna : Built-in type (Fixed)
Outline of Smart Key FOB
Smart Key FOB is mainly used for locking or unlocking the doors of the vehicles. Smart Key FOB detects signals when it reaches the vicinity of vehicle, and sends signals using radio frequency.
Also, Smart Key FOB sends a radio wave signal while a button is pushed. When the button is released, the radio wave signal is automatically off within 0.196 seconds. When the button is depressed continuously, Smart Key FOB sends a signal for a predetermined constant time.
This product sends a signal when the following buttons are pushed.
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are
not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC and IC RF Radiation Exposure Statement: This equipment complies with FCC
and IC RF Radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>