COLIBEN WLDZ18 Baby Playpen with Folding Mat User Guide

Table of Contents

COLIBEN-WLDZ18-Baby-Playpen-with-Folding-Mat-PRODUCT

Specifications

Package List

Installation Instructions

Step 1: Check the parts list. If any part is missing, contact support@coliben.com.
Step 2: Spread the cloth cover on the ground and insert the steel pipes (87cm & 71cm) into their corresponding positions.
Step 3: Connect the pipe fittings around the bottom using 4 T-shaped connectors and 4 suction cup tees.
Step 4: Insert the 59cm vertical steel pipe into the cloth cover.
Step 5: Insert the steel pipes with sponge (87cm & 71cm) into the cloth cover, then connect the fittings using 4 T-shaped connectors and 4 three-directional connectors.
Step 6: Tighten all connector parts and cover them with the Oxford cloth.
Step 7: Place the mat inside the playpen.

Note: Please ensure proper supervision when using the playpen and follow all safety guidelines mentioned in the manual.

Contact Information
For any questions or issues regarding the baby playpen, contact support@coliben.com for free replacement or a full refund.

FAQ

Q: Can I use the playpen for children above 6 years old?
A: It is recommended to use the playpen for children within the age range of 0-6 years old for safety reasons.
Q: How often should I check the playpen for any damages or loose parts?
A: It is advised to regularly check the playpen for damaged hardware, loose joints, missing parts, or sharp edges before assembly and periodically during use.

Model: WLDZ18
Customer Service: support@coliben.com.

WARNING

Please follow the instructions to install the product correctly.
Avoid climbing over and pinching the product.
Without proper supervision, the infant should not be placed alone or with another child in the playpen.
To avoid suffocation, do not place products that may cause children to suffocate.
Never leave child unattended when using this product.
Incorrect installation can be dangerous.
Any additional or replacement parts should be obtained from our company.
Check regularly that all assembly fittings are tightened.
Do not use the playpen close to an open fire or other heat source.
Do not move the product with child inside.
Check this product for damaged hardware loose joints missing parts or sharp edges before assembly and periodically during use.
Do not use the playard if you can not exactly follow these instructions.

Package List

Step 1:
Check the parts list, if there is any missing part, send us an email: support@coliben.com.
Step 2:
(Bottom)Spread the cloth cover on the ground, then insert the steel pipe(87cm & 71cm) into the corresponding position based on the pipe length.
Step 3:
Connect the pipe fittings around the bottom with 4 T shaped connectors and 4 suction cup tees.
Step 4:
Insert the 59cm vertical steel pipe into the cloth cover.
Step 5:
(Top) Insert the steel pipes with sponge (87cm & 71cm) into cloth cover as step 2, then connect the pipe fittings with the rest 4 T shaped connectors and 4 three directional connectors.
Step 6:
Tighten all the connector parts. Cover up the connectors with Oxford cloth then stick it together.
Step 7:
Put in the mat.