Shenzhen Huafurui Technology N1 Smart Watch User Manual
- June 6, 2024
- Shenzhen Huafurui Technology
Table of Contents
Shenzhen Huafurui Technology N1 Smart Watch
An Introduction to Device
APP Binding
Press and hold the power button to start the machine, scan the QR code to
download the GloryFit app for pairing , and set the watch in the app.
Notes
- Please ensure that your mobile Bluetooth and GPS are turned on prior to connection;
- Do not directly pair mobile Bluetooth with watch;
- Support (1) Android 5.0 and more advanced systems; (2) IOS 10.0 and more advanced systems
Wear / Replace
Note:
- Too loose wearing may affect the data accuracy of heart rate;
- Keep its surface clean and dry.
Interface Operation Instructions
Dial Plate Change
Long Press the dial plate for 3s to enter the change interface
Interface Operation
Status Bar
Find Your Phone, Brightness Adjustment, Do Not Disturb, About the Device
(model, MAC/version)
Function Introduction
Exercise (a variety of exercise modes are available, record the relevant parameters in the process of exercise )
Heart rate (measure current heart rate and record maximum and minimum data)
Blood oxygen (monitoring oxygen concentration in blood)
Status (record total steps, mileage, calories)
Sleep (record total sleep time, sleep status and awake status)
Music control (control the music playing in the mobile phone when connect to the mobile phone)
Notes for Safety and Product Information
- .Battery Alarm Do not damage battery via shape items, and do not disassemble it without authorization;
- .Health Alarm If you are wearing implantable electronic devices such as pacemakers, please consult your doctor before heart rate measurement; Equipped optical heart rate sensor flashes green light. If you have epilepsy or are sensitive to flickering light, please consult your doctor whether you can use the product; The device will track your daily activities according to the sensor with the aim of offering data involving your daily activities such as steps, mileage, calorie, sleep and heart rate. Please note that they may not be completely accurate; The device, accessories, heart rate sensor and other related data are for entertainment and fitness, instead of medical purpose. They can’t help you diagnose, monitor, treat and prevent any disease or symptom. The heart rate data is for reference only. We aren’t liable for all results caused by data deviation.
- Traffic Safety Please keep great judgement and ensure driving safety. Do not carry out all activities that may divert your attention; malfunction may occur due to the interference of radio. Please contact the manufacturer to consult about detailed information.
- Operating Environment Do not wear the watch when showing, diving and etc.; Do not wear the watch too tight, and keep the part that touches skin dry; Do not make kids or pets bite the device or its accessories to avoid any damage; The watch isn’t waterproof to acid, alkaline solutions, chemical reagent and other corrosive liquid; Please use the device within 0-35℃. Too high or too low environment temperature may bring device malfunctions.
Declaration of Conformity
The device conforms to FCC Part 15. All operations should match the following two conditions:
- The device won’t lead to any harmful interference;
- The device must accept all interference that can be received, including all interface that may lead to unnecessary operations. All changes or modifications that aren’t clearly approved by the compliance party may make users fail to operate the device. According to FCC Part 15, the device has passed test. It conforms to the limitations of class B digital device with the aim of offering reasonable protection and avoiding all harmful interference brought by equipment in the house. The device generates, uses and radiates r-f energy, so improper installation and use may bring harmful interference to radio communication. We can’t ensure that the installation in the specific environment may not generate any interface.
If the device truly brings harmful interference to radio or television reception, please turn the device on or off to check. Encourage users to try the following measures to correct such interference:
- Relocate the receiving antenna;
- Increase the distance between the device and receiver;
- Connect the device to a socket (different from the socket used by receptor);
- Consult the agency or experienced technician to get help.
The device conforms to EU ROHS standards. Please refer to IEC 62321, EU ROHS directive 2011/65/EU and Recised directive.
Safety Warnings
Unauthorized battery change will lead to explode;
Please handle used battery according to the following descriptions
Do not dispose of old battery and residual wastes together. Please deal with them separately. It is free to handle them at the public collection station. Owners of old appliances should be responsible for bringing them to collection stations or similar stations. A few personal efforts make contributions to the recycle of valuable raw materials and handling of harmful substances.
Manufacturer’s Name: Shenzhen Huafurui Technology Co., Ltd.
Address: Unit 1401 & 1402, 14/F, Jinqi Zhigu Mansion (No. 4 Building of
Chongwen Garden), Crossing of the Liuxian Street and Tangling Road, Taoyuan
Street, Nanshan District, Shenzhen, P.R. China
Product Name: SmartWatch
Trade Mark: CUBOT,HAIRY
Model number: N1
Operating Temperature: -10° C to 40° C
This device in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. All essential radio test suites have been
carried out.
- The device complies with RF specifications when the device used at 5mm form your body
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Care for the environment! Must not be discarded with household waste!
RF Specification
Function| Operation Frequency| Max RF
outputpower:
| Limit
---|---|---|---
BLE| 2402~2480 MHz| ‐6.23 dBm.| 20 dBm.
This product can be used across EU member states.