QAZQA Jeana HL 5 103897 Track Light 1-Phase with 5 Spotlights Instruction Manual

QAZQA Jeana HL 5 103897 Track Light 1-Phase with 5 Spotlights

Product Information

Model| Voltage| Power Consumption| IP Rating| Brand| Manufacturer Address| Website| Product Code| Maximum LED Wattage| Overall Size (Length)| Overall Size (Diameter)
---|---|---|---|---|---|---|---|---|---|---
Jeana HL| 220-240V~ 50Hz| .7W| IP20| FittinQ B.V.| Smaragdweg 52, 5527 LB Hapert, The Netherlands| www.qazqa.nl| 103897/103898 103899/103900/106014| 5xGU10 LED Max.7W| 1725mm| 80mm

Product Usage Instructions

1. Ensure the product is connected to a power supply with a voltage rating of 220-240V~ and a frequency of 50Hz.
2. Make sure the power consumption of the product does not exceed 0.7W.
3. This product has an IP20 rating, which means it is protected against solid objects larger than 12mm in diameter but is not waterproof. Avoid exposing the product to moisture.
4. Refer to the provided product code for identification and reference purposes.
5. The maximum LED wattage supported by this product is 7W. Ensure that the LED bulbs used do not exceed this wattage.
6. The overall size of the product is 1725mm in length and 80mm in diameter.

Installation

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product.

Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with clean, dry cloth or brush, Use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.
10. Meaning of symbols:

• This icon indicates the level of water-proof and dust-proof
• Protection Class I: the fitting must be earthed
• Protection Class II: the fitting is doubled insulated and does not require earthing
• Protection Class III: the fitting is low voltage
• Minimum distance from lighted objects (meters)
• The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons.
• The armature is designed to work only with the indicated voltage. Different items require different working voltage.
• The luminaire can be used in combination with a dimmer
• The luminaire can be dimmed by wall switch
• The reference light angle and light space of the luminaire
• This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

1. Take note of the symbols when connecting wires:

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl.

FittinQ LTD
55 Baker Street, London, W1U 7EU United Kingdom.

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>