BEOK TCR7 RGB Colorful LCD Screen Smart Thermostat Instruction Manual

BEOK TCR7 Series RGB Colorful LCD Screen Smart Thermostat

Product Overview

Product Overview
This series of thermamost has Floor Heating, Fan Cal, and integrated vision, meeting the requirement under different sonerios

Floor heating

|

Heating

| EP| Built-in & floor sensor, floor limit sensor+ Weekly programming
WP| A NC/NOdual-output+ Weekly programming
WPB| A NC /NO dual-output+ Weekly programming+ Potential-free output

Fan Coil

|

Heating /Cooling/

Ventilation

| Ac2| Timer task+ 2-pipe system
Ac2-

485

| ‘Timer task + 2-pipe system+ 485Modbus (optional)
Ac4| ‘Timer task + 4-pipe system+ 485Modbus (optional)

Integrated

| Heating/ Cooling/ Ventilation/Floor heating / Floor heating+ Heating| AWY| Floor heating & fan coil, weekly programming + Potential-free output + Timer task  + 485Modbus (optional)+ Door card (optional)

Display Symbols

Temperature Control Mode(Floor Heating/Integrated)

• Auto Mode
  Weekly-DRC:ted program, up to 6 heating events can be set per day. Heading events, workdays and temperature can be separately customized based on personal routines.

• Manual Mode
  The thermostat works based on manually-set temperature, disconnecting from auto mode.

• Temporary Mode
  Thermostat wor1al based on manually-set temperature temporarily and tllen shifts beck to auto mode till next event.

User Operation

• Power on/off: Press the menu button shortly to tum on/off the thermostat.
• Temp setting: Relate the handwheel’ button ‘to change the set temperature by 0.5’C.
• system mode : Presa • menu button • shortly to switch cooling/heating/ventilation. (Fan Coll)
  • press menu button shortly to switch CDOlinglheeting/venliletionlftoor heating/ floor healing+ healing. (lnlagralad)
• Enter menu: Press ” enter the menu Interface.
• Temp control mode: Prass•menu button • shortly ID swild1 manual/auto mode. (Floor heatiig)
  • Prass•fan button • shortly ID swild1 manual/auto mode. (lnlllgral8d, floor heating)
• Child-lock: Press’ M ‘+ • menu button “f0r 3 seconds to ac:tlvate child-lock.

Auto-mode Setting
When device i& off, press •wheel button • to enlarge menu page, choose “period selling’ ID set pa, monetary, then preSS  login button) • to save and axit

Advanced Setting (Usually for Professional Technicians)
Choose “advanced 8811ing’ on menu page and put in p868WOl’d 123456 to enter advanced selling page, set parameters then press login button to save and exit

Sensor Mode

| Built-in Sensor Floor Sensor

Built-in Control&Floor Limitation

|

IN

Burt-in Sensor Calibration| -5-5°C| – 3 °C
Burt-inMaxSettingValue| 5- 95 “C| 50 °C
Floor Max Setting Value| 10- 95 °C| 50 °C
Limitation Value| 20- 95 °C| 35 °C
Output Jitter Control| 0- 5 °C| 1 °C
Anti-Freeze Protection| ON/ OFF| OFF

Linkage Mode

| Non inverting Inverting Inverting

Inverting and Anti-Freeze closed

|

Noninverting

Linkage lime Delay| 0-5Min| 0Min

Weekday Mode

| Monday to Friday/Monday to Saturday

/Mondyato Sunday/

|

2-day

Boot Type| Function Off/Function On/Function Saved| OFF
Temperature Unit| °F /° C| “C

Child Lock Type

| None Lock All

All but power

|

None

Control Mode| All/Air/Floor| Floor
Cloud Region| CN / US / EU| CN
Reset All Settings| I| I

RGB Colorful LCD Screen Smart Thermostat

• Scan QR code to finish network configuration swiftly, easy and conveniently.
• The programmable device, multiple periods allowed to set per day.
• 2.8 inches ultra-large colorful LCD screen, delicate visual effect.
• The device can be controlled by voice through Amazon Alexa and Google Assistant

Parameter

• Supply voltage  AC100~240V;50~60Hz
• Power consumption 1W Max (Wi-Fi 3W Max)
• Temp. setting range  5~95℃
• Floor limited range 20~90℃
• On/off deviation –  0.5~10℃, Factory setting ±1℃
• Ambient temperature – 5~50℃
• Protection level I P 20
• Shell material  Anti-Flammable PC

Sensor failure
Please select work mode of sensors correctly. When It shows EO/E1 error, the thermostat will stay power-off till the error is eliminated.ED: the built-in sensor is short-circuited or disconnected. E1: floor sensor is short-circuited or disconnected.

Timer Task Setting (Fan Coil/Integrated) Press” wheel button”to enter the menu. Tum the knob” wheel button “, choose “Auto Mode”, and then choose “Schedule”. Set the parameters by turning the knob, then press” menu button • to save and exit to home page

Dimensions (Unit: mm)

Mounting Steps
The thermostat adopts a pre-guide and limited snap-fit design. It is easy to mount.

1. Release the front cover by inserting a head screwdriver into the bottom crack.
2. Insert the wires and then fix these wires with screws. The suggested wire-stripping length is 7-9mm.
3. Mount backing plate into wall-cassette, put screws and then fix the thermostat. Make sure that the thermostat is fixed without deformation. Suggested torque is 0.2-0.4N.m (2.0-4. 1kgf.cm).
4. Re-mount the front cover via a snap-fit connection.

Connecting Diagram

The thermostat operates in full capacity in areas with an altitude of less than 2500 above sea level. The power rating of external load should be less than or equal to 80% rated power of the thermostat in areas with an altitude of 2500m to 4200m.

Floor Heating

Fan Coil

Integrated

Documents / Resources

| BEOK TCR7 RGB Colorful LCD Screen Smart Thermostat [pdf] Instruction Manual
TCR7, RGB Colorful LCD Screen Smart Thermostat, TCR7 RGB Colorful LCD Screen Smart Thermostat
---|---
| BEOK TCR7 RGB Colorful LCD Screen Smart Thermostat [pdf] Instruction Manual
RGB Colorful LCD Screen Smart Thermostat, TCR7 RGB Colorful LCD Screen Smart Thermostat, TCR7

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>