mooas MBS3 Retro Wireless Speaker Moodlight Instruction Manual

RETRO WIRELESS SPEAKER MOODLIGHT

Thanks for purchasing Mooas Retro Wireless Speaker Moodlight. Please read the manual carefully before use.

Moors Retro Bluetooth Speaker Moodlight

Components

• Speaker Moodlight
• Strap
• Type-C USB Cable
• Manual

Features

• Wireless speaker & mood light with emotional retro design
• Create a cozy and special atmosphere in anywhere like home parties, camping sites, and bedrooms
• Simple Bluetooth connection and button operation
• Stable wireless connection up to 10m with Bluetooth 501/
• Support MS function to produce stronger stereo sound
• Sophisticated light control with brightness adjustment knob
• Flame mode creates a glamorous and romantic atmosphere with naturally blinking light
• Lightweight with strap attached: portable and can be placed in various areas
• Non-slip pad and stable placement

Specification

• Bluetooth Version: Bluetooth 5.0
• Bluetooth Range: 10m
• Bluetooth Frequency: 2.402-2.48008Hz
• Bluetooth Profiles: A2DP, AVRCP, HFP, HSP
• Connectivity: Bluetooth
• Output power: SW
• Speaker Impedance: 4(1415%
• Frequency Response: 130hz-18KHz
• Battery: 3.7V 1800mAh
• Playing time: About 6-10 hours ( It depends on the using environment. )
• Charging Time: 4-5 hours
• Rated Input: DC SV 1A
• LED Lifespan: 3,000 hours
• Luminous Flux: 201m
• Color Temperature: 1700k

Product Details

1. Brightness Adjustment Knob

2. Type-C Charging Port

3. Charging/Status Indicator
   – Pairing standby: Blue LED flashing fast
   – Pairing completed: Blue LED ON
   – Playtime: Blue LED flashing slowly
   – Charging: Red LED ON

4. Flame mode ON/OFF

5. Short press to go to the next song, long press to volume up

6. Long press to turn ON/OFF the speaker, Short press to play/pause during playtime

7. Short press to go to the previous song, Long press to volume down

8. Non-slip pad

9. Loop for strap

How to use

During first time use or when not used for a long time, please fully charge the battery before use.
1 . Wireless Speaker
Pairing only once on the first connection guarantees automatic recognition afterward. When it doesn’t support automatic pairing, please perform the pairing again from the beginning. Perform Bluetooth pairing according to the following procedures.

1. Long press the button to turn on the speaker and automatically turn to Bluetooth pairing standby mode. In pairing standby mode, the blue LED of the indicator light flashes quickly. If the Bluetooth is not connected within 10 minutes, the speaker Is turned off.
2. After activating the Bluetooth function in the Bluetooth-enabled device, search for the connectable device and select ‘Moors BTS3’. When pairing is completed, the blue LED of the indicator light stops flashing along with the ringtone.
3. While music is playing, the blue LED flashes slowly.
4. While music is playing, long press + or — button to volume up or volume down.
5. While music is playing, short press the button to go to the next song, and press the buttons to go to the previous song.
6. While music is playing, press the button to pause and restart the music. If you long-press buttons, the speaker and the blue LED are turned off.

2 . TWS function
TW$(True Wireless Stereo) is the function that helps to produce stereo sound separated in left and right channels by promoting the wireless connection of two speakers.

1. Prepare 2 Retro Wireless Speaker Moodlight.
2. Long press buttons on each speaker to turn on both of them. Along with the ringtone, the blue LED of the indicator light flashes quickly. If one of the two speakers had already been paired, disconnect the speaker and turn both speakers into pairing standby mode.
3. If you long-press both the + and — buttons on one device at the same time, two speakers are connected along with the ringtone. The blue LEO of the device you pressed the button to keeps flashing while the other one stops flashing.
4.  Aker activating the Bluetooth function in Bluetooth enabled device, search for the connectable device and select ‘Moors BTS3’. When pairing Is completed, the blue LED of the Indicator light of the other device stops flashing along with the ringtone.
5. The music is played on both devices at the same time. While music is playing, the blue LEO of both devices flashes slowly.
6. When using the TWS function with two devices, long-press the button on one device to turn off both devices.
7. Once the initial setting for the TWS function Is completed, the TWS function is automatically activated without having to press the + and — button at the same time.
8. TWS function can be turned off by long-pressing + and – buttons of one device at the same time.

3. Moodlight

1. Use the brightness adjustment knob to turn ON/OFF the moonlight. If you turn the knob clockwise, the moonlight Is turned on with a click. If you turn it counterclockwise to the end, the moonlight is turned off with a click.
2. The more you turn the brightness adjustment knob towards the brighter the light becomes.
3. If you press the button on the back, it is converted into a flame mode in which the light flashes naturally. If you press the button again, it goes back to the previous model.

4. Charging

1. it starts charging If you connect the included Type-C US8 cable to the charging port under the brightness adjustment knob and the other end to the DC 5V adapter.
2. While charging, a red LED Is ON In the charging indicator and it is turned off when charging is completed.
3. When the battery of the speaker is less than 10%, the warning sound rings. Please charge the speaker.

Precautions

• Please check the volume level before use. Sudden treble may damage the hearing system and the appliance.
• If there are many Bluetooth devices in the vicinity, there may be a frequency crossing. Please do not disturb other Bluetooth devices.
• The distance between devices is 10 meters. If out of range, the connection is automatically disconnected.
• Do not store in a place with high temperature and high humidity, direct sunlight, humidity or dusty place.
• Do not clean the product with chemical products. Use a soft cloth or towel when cleaning foreign objects or dust.
• Do not disassemble or assemble the product.
• Do not cover it with a quilt or cloth during use. The heat generated during use may cause fire or product deformation.
• Avoid vibration and shock. When not in use, disconnect the power cable and turn off the power.
• Do not throw or throw the product into the fire.
• Keep out of the reach of children.
• Do not disassemble the battery to open or cut it. Do not short-circuit the battery.
• Do not expose the battery to heat or direct sunlight.
• Do not apply a mechanical shock to the battery.
• Check the polarity of the battery and the device and use them correctly.
• In the event of battery leakage, do not touch the skin or eyes with liquids. If contact has been made, wash the contact area with plenty of water and seek medical advice.

Product Mooas Retro Wireless Speaker Moodlight
Model Name MBS3
Sin Ø79.5x 176 mm (ID x H)
Weight 278g
Material ABS, PC, Silicone
Components Speaker Moodlight. Strap, USB Type-C cable, Manual
Power U58 Type-C cable
Rated Output SW
Manufacturer Mooas Inc. I wmv.mooas.com
C/5 +82-31-757-3309
Address C-819 – 822. Munieong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-got Songpa-gu, Seoul, Korea
MFG date marked separately / Made in China
Copyright 2021. Mooas Inc. All rights reserved
*Product specifications may be changed without notice to improve performance.

• This wireless device may cause radio interference, so service related to human fife safety is not provided.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>