mooas MC-W6 Smart Wireless Charging Nightlight Clock User Manual

MC-W6
User Manuals

Attention

• Please use the original or manufacturer-specified attachments or accessories.
• Please do not disassemble products, so as not to cause trouble or safety hazards
• Do not use this product in the place near the water source, do not place this product in the damp place
• Due to improper use of product damage, odor, smoke, and other phenomena, please immediately terminate the use, and send it to professional maintenance personnel
• Do not place the product in a strong electromagnetic wave, strong static electricity, and easy condensation
• Please do not place the magnetic stripe card (including credit card, telephone card, bank card, boarding card, etc.) near the product, Otherwise, it will be damaged by the magnetic field
• If you use a wireless charger in an area with weak network signals, your mobile device may not be able to receive the network
• Do not place metal, magnet, magnetic stripe card, and other foreign matters between the mobile device and the wireless charger, otherwise, the mobile device will not charge normally or be damaged due to overheating
• If a thick protective shell is installed for the mobile device, the wireless charging may not work properly. If the cover is thick, remove it, and then put the mobile device on the wireless charger for charging

Main features

• Smart home wireless charger charge any equipment that accords with QI wireless charging standard

• High definition and super large digital LCD screen time display

• Perpetual Calendar Up to the Year 2099

• Time format in optional 12/24 HR

• Day of week in 8 languages

• Bed light brightness can be adjusted on 3 levels

• Backlight brightness can be adjusted in 3 gears or OFF

• Daily Alarm clock and snooze function

• Snooze setting (5/10/15/20/25/30 minutes or OFF)

• Temperature unit in optional °C /°F

• Temperature measurement ranges: -9.9°C (14.2°F) ~ 50°C (122°F)

• Humidity measurement ranges: 20%RH ~ 95%RH

• Power Supply:
  Battery: CR2032 (keep the time can go on after the external power supply is disconnected)
  Adapter： DC9V2000mA

• Wireless charging output: MAX.10W

Appearance description

1 ： Time
2 ： Date
3 ： Day of week
4 ： Humidity
5 ： Temperature
6 ： Backlight brightness adjust button
7: Bed light brightness adjust button
8: Adapter DC input socket
9: Battery compartment cover| 10: Temperature and humidity sensor
11:【SET】button
12:【ALARM】button
13:【+】 and 12/24HR switch button
14:【-】 and ℃/℉ switch button
15: Charging status indicator
16: Antiskid pad of mobile device wireless charger
17:【SNOOZE】and Alarm ON/OFF button
---|---

Initial operation

• Open the battery compartment cover 9
• Install the CR2032 battery in the correct polarity direction
• Insert the adapter DC plug into the product power socket 8, plug the AC input of the adapter into the mains socket of electricity.

Clock settings

• Press and hold the the【SET】button ○11 for 2 seconds, the HOUR start to flash, and press【 + 】or【 – 】buttons to set the correct HOUR, hold the 【 + 】or【 – 】buttons for 2 seconds can be adjusted quickly.

• Press the【SET】 button to confirm the item has been set and go to the next one, the sequence of setting items is as follows:
  HOUR MINUTE Format of DATE (D/M or M/D) YEAR MONTH DATE Language of week

• Press the SET button to confirm the last item to end the setting procedures, then it will return to the normal mode.

• When choosing the 12HR format, if “AM” is displayed before the hours, it means that the hour is ante meridiem, if “PM” is displayed before the hours, it means that the hour is post meridiem.

• The 8 languages that show week abbreviations are listed below:
  F.Y.I.:
  

• If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the set mode.
  

Daily alarm settings

• Press【ALARM】button 12 once, and the clock will switch to the alarm time display for 5 seconds.

• Press【SNOOZE】button 17 can be turned on or off the alarm, LCD display the icon  ALARM means that the alarm function is ON, and the icon  ALARM disappears from the LCD mean that the alarm function is OFF.
  

• Press and hold【ALARM】button for 2 seconds, the hours of the ALARM time start to flash, and press【 + 】or【 – 】 buttons to set the required HOUR, hold the 【 + 】or【 – 】buttons for 2 seconds can be adjusted quickly.

• Press【ALARM】button to confirm the item has been set and go to the next one, the sequence of setting items is as follows:
  Alarm HOUR Alarm MINUTE SNOOZE time

• Press【ALARM】button to confirm your setting and to end the setting procedure.

• The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case, the alarm will be repeated automatically after 24 hours.

• When the alarm is ringing, press any buttons except【SNOOZE】to stop the alarm signal. It is not necessary to reactivate the alarm. It will ring again this time the next day.

• When the alarm is ringing, press the button【SNOOZE】the alarm mode will to get to snooze mode. The alarm signal sounds again after the snooze time your set.
  F.Y.I.:

• If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the alarm time set mode.

Backlight brightness settings

• Touch button 6 to adjust the brightness of the backlight, the brightness level is divided into the light, middle, dark, and off.

Bed light brightness settings

• Touch the button○7 to turn ON/OFF or adjust the brightness of the bed light, the brightness level is divided into light,
  middle, dark.

Temperature unit switch

• Press the button【 – 】 14 to switch the temperature unit in ℃ or ℉.

Time format switch

• Press the button【 + 】 13 to switch the time format in 12HR or 24HR.

Wireless charging

• Place the mobile device which supports QI standard on the antiskid pad○16 middle of wireless charger correctly, the red indicator light on.
  

• The indicator light is red when charging normally and green when fully charged (currently only supported by some Samsung mobile devices). The red indicator light flashes when metal or similar items are detected.

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) t h i s device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority t o operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference t o radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>