GEEKOM XT Series Mini PC User Manual

June 26, 2024
GEEKOM

GEEKOM XT Series Mini PC

GEEKOM-XT-Series-Mini-PC-FIG- \(1\)

Product Information

Specifications

  • USB Gen: 3.0
  • LED Indicator: Yes
  • Ports: USB, HDMI, USB+DP, Ethernet
  • USB PD: Supported

Product Usage Instructions

Connecting the Hub

  1. Locate an available USB port on your device.
  2. Connect the hub to the USB port securely.
  3. If applicable, connect the HDMI cable to your external display.

Using the Hub

Once connected, you can now utilize the various ports on the hub for data transfer, display output, and more. The LED indicator will show the status of the hub.

Frequently Asked Questions (FAQ)

  • Q: What is the USB Gen of this hub?
    A: The USB Gen of this hub is 3.0.

  • Q: Does this hub support USB Power Delivery (PD)?
    A: Yes, this hub supports USB PD.

  • Q: How do I know if the hub is properly connected?
    A: The LED indicator on the hub will light up when it is properly connected to your device.

DESCRIPTION

GEEKOM-XT-Series-Mini-PC-FIG- \(2\)

  1. USB 3.2 Gen2 Port
  2. Speaker/Headset
  3. Power Button/LED
  4. +DP-Port
  5. HDMI Port
  6. USB 2.0 Port
  7. Port
  8. Ethernet Port
  9. Electric Power Inlet

INSTRUCTION

GEEKOM-XT-Series-Mini-PC-FIG- \(12\)

M.2 SSD

GEEKOM-XT-Series-Mini-PC-FIG- \(13\)

1.2V DDR4

GEEKOM-XT-Series-Mini-PC-FIG- \(14\)

VESA

GEEKOM-XT-Series-Mini-PC-FIG- \(15\) GEEKOM-XT-
Series-Mini-PC-FIG- \(16\)

Safety and Caution Information

  • AC Power Adapter: Risk of electric shock, fire, or burn if using an AC adapter other than the one provided with this device. Indoor use only and in dry locations. The device must only be repaired by a professional. Do not open the enclosure. The adapter is rated for use between 0 °C and 35 °C (32 “F and 95 *F). Connect only to a properly wired and grounded outlet.
  • Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be by local environmental regulations.
  • A return use of the maude per user may violate regulatory compliance requirements and may expose the user to safety hazards.
  • Temperature: This device is intended for use in ambient temperatures between 0°C and 35°C (32*F and 95 F). Avoid using or storing next to heat sources, indirect sunlight, or outside the intended temperature ranges.
  • Medical: This device may interfere with the operation of some pacemakers, hearing aids or other medical devices. To reduce the risk, maintain a separation distance of 20 cm (8 inches) between the device and the medical device. Refer to the medical device for additional information.
  • Modify: Modification of the wireless solution, thermal solution, device components or enclosure shall violate regulatory compliance requirements and may induce safety hazards.

FCC

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body.

Connect to a Network:

  1. Click the network icon in the notification area in Windows. A list of available wireless networks will be shown.
  2. Select the desired network, and input the information (if needed).

Note : when connecting to a secured wireless network, enter your Wi-Fi password when prompted.

Customer Support: support@geekompc.com
www.geekompc.com

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC ID
This device contains license-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation of 5150- 5350 MHz is restricted to indoor use

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals