Linkind WL100070203 Smart Vintage Filament Bulb User Manual
- June 6, 2024
- Linkind
Table of Contents
WL100070203 Smart Vintage Filament Bulb
User Manual
CAUTIONS
To avoid personal injury and/or possible product damage,
- Risk of electrical shock. Disconnect power at fuse or circuit breaker before installing or servicing.
- To prevent early lamp failure, lamp should only be installed in operating environments ranging between -20 ℃ and +40 ℃(-4°F and +104°F).
- Suitable for damp locations.
- Lamp dims via wireless control and will not operate with a dimmer switch.
- Not for use in totally enclosed luminaires.
- Not for use in emergency light fixtures or exit signs.
- Ensure fixture can support the added weight of the lamp/bulb.
Warning
- This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE: The grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. Such modifications
or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Quick Start Guide
-
Get the Linking app from App Store or Google Play.
-
Create an account and sign in.
-
Press the ‘+’ button to add Wi-Fi Filament A19 / ST64 (2nd Gen).
Contact Us
SPRING SUNSHINE TECHNOLOGY CO., LIMITED
Room 2401-2404, 24/F., Fu Fai Commercial Centre, 27 Hillier
Street, Sheung Wan, HK
Phone: 1-855-999-6677(24×7)
Website: www.linkind.com
Email: service@linkind.com(EN)
To protect our environment, this manual is made brief. For a detailed version,
please download it from the Amazon product page or on our website.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.