Linkind BR30 Wi-Fi Smart Light Bulb Instruction Manual
- June 16, 2024
- Linkind
Table of Contents
Linkind BR30 Wi-Fi Smart Light Bulb
Function Introduction
Installation Instructions
- After installing the bulb, power on the bulb.
- The bulb will gradually change to a warm white light after R-G-B-W, and then enter the state of waiting to connect to the network.
- To connect the bulb to the Internet, download the Aidot APP and follow the APP guidelines.
Quick Start Guide
- Scan the OR code below, or search for”AiDot· in the App Store or Google Play
- Create an account and sign in.Tap·+· to add the “Wi-Fi Light Bulb”.
- Follow the instructions on the App. ( Note: Please turn on Bluetooth and location. )
Troubleshooting
Cannot connect the bulb to the Ai Dot App.
- Check whether the bulb is powered on.
- Check whether the Wi-Fi of your smartphone is enabled. Please make sure Wi-Fi connected to your smartphone is 2.4GHz (5GHzWi-Fi is not supported).
- Please check whether Bluetooth and GPS are turned on.
- Make sure your smartphone is close to the bulb in the first configuring network.
- Check if you have entered the correct Wi-Fi password during the Wi-Fi setup. Make sure the distance between the bulb and router is less than 50ft.
- Check whether the home network is stable. If not stable, let the blub connect to another phone’s hotspot.
Can I use group control with voice assistance?
- Please make sure your bulb is connected to Wi-Fi before using voice assistance.
- Please set voice group control in Alexa/Google/ Assistant/ Smartthing App.
What is the maximum number of bulbs I can connect via Bluetooth?
- Up to 6 bulbs can be connected as usual, but the specific quantities is based on the brand of your smartphone.
How many bulbs can be connected to one phone?
- Up to 50 bulbs can be connected to one phone if the network is normal.
How to turn on the music rhythm function
- Automations page >Sync Lights with Music> Tap the”+” icon(at the top right corner)> Then create a new music rhythm model that you
- Note: You can choose different music models based on your needs.
Frequently Asked Question
Can Linkind Smart Bulbs connect the wall dimmers?
No, Linkind Smart Bulbs cannot connect the wall dimmers or other variable
power devices. Dimming is only supported via Ai Dot App or other compatible
smart devices.
How to Connect Alexa I?
- Our bulbs cannot be found directly by Alexa, or through Alexa’s
“discover devices” function.
You need to connect the bulbs to the AiDot app first, and then connect the AiDot to the Alexa app so that the bulbs added to the Ai Dot can be synced to the Alexa app.
-
1. After you have connected your device to the AiDot App, go to the Ai Dot> lnteg ration > choose Amazon Alexa. - Put in your Alexa username and password to connect the two accounts.
- This enables the AiDot skill within Alexa. (Please note: the skill is AiDot.)
- Once connected, use your nearest Alexa device and address it using the name you assigned in the AiDot app. You can tell it to turn the light on or off, change colors, dim the bulb, etc.
How to reset the smart bulbs?
- Turn on and turn off the bulb consecutively 6 times(on and off counts for once). Keep the interval between 0.5s-1.5s.
- Then turn it on again, and you’ll see the color cycling(red, green, blue, and white), or the light bulb will blink twice, which means reset success.
- After resetting the device, the device will still be displayed on the App.
What should I do if the blub offline?
Here are some suggestions that may help you.
-
Please make sure the SSID or password of the WiFi has been changed or not. If it has not been modified, please restart the device. If it has been modified, please reset the device and re-add the device to the Ai Dot APP with the new Wi-Fi SSID and password.
-
Please check the strength of the WiFi that the device is connected to. -2-
If the connected network environment is weak, it may also cause the device offline. In this case, please move the router closer to the device or move the device closer to the router. If possible, please remove some infrequently used networked devices on the router to reduce the Wi-Fi load. -
Please make sure the voltage of the device is stable, unstable voltage will cause the device to keep rebooting and unable to connect.
-
Please check whether the router or device is in a power-off state or has been in a power-off state for a long time. If it is powered off, please re-power it. If it is powered off for a long time, please reset the device and re-add it to AiDot APP.
How to get support?
- Email: [email protected]
- Support Phone: 1-877-770-5727 (Monday-Friday 9:00 am-5:00 pm)
Warning
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: The grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. Such modifications
or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures – Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/lV To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Cautions
To avoid personal injury and/or possible product damage, the following cautions must be followed:
- Risk of electrical shock. Disconnect power at fuse or circuit breaker before installing or servicing.
- To prevent early lamp failure, a lamp should only be installed in operating environments ranging between: -20t: and+40t:(-4°Fand+ 104°F).
- Suitable for damp locations.
- Not for use with dimmers.
- The lamp dims via wireless control and will not operate with a dimmer switch.
- Not for use in totally enclosed luminaires.
- Not for use in emergency light fixtures or exit signs.
- Ensure the fixture can support the added weight of the lamp/bulb.
Contact Us
- SPRINGSUNSHINETECHNOLOGYCO., LIMITED FLAT/RM 01-04, 24/F, FU FAI COMMERCIAL CENTRE, 27 HILLIER STREET, SHEU NG WAN, HK
- Phone: 1-877-770-5727(Mon.-Fri. 9to5PST)
- Email: [email protected]
- Manufacturer: Leedarson loTTechnologylnc.
- Address: No.151 1, 2nd Fanghu North Rd, Huli District, Xiamen, China
- @llinking. lights
- @linldndofficial
- @linkindofficial
- http://www.linkind.com
Made in China