Linkind OB-XEOV-0758-AV 16 LEDs RGBW Solar Landscape Spotlights User Manual
- June 5, 2024
- Linkind
Table of Contents
Linkind OB-XEOV-0758-AV 16 LEDs RGBW Solar Landscape Spotlights
SPECIFICATION
INTRODUCTION
The solar landscape spotlights can automatically detect the changes in the brightness of the external environment. When the brightness is low enough, it will automatically switch from energy-saving mode to lighting mode without motion detection (Auto on at night/ Auto off at sunrise).
PACKAGE CONTENTS
- A 2 x Solar Landscape Spotlight
- B2 x Plastic Anchor
- C 2 x Plastic rod
- D 2 x turn-knob
- E 4 x Gecko screw
- F 4 xScrews
- G 1x User Manual
Not If 6 Pack, content A-F will triple e: If 4 Pack, content A-F will double
INSTALLATION
Press the back button and select a desired mode. Then choose a place that can get enough sunshine to install the light, the more sunshine it gets, the longer it can illuminate.
Method 1 : Ground Inserted
- Connect the ground stake with the light. Then, adjust the angle of lamp holder and tighten the knob.
- Insert the whole light into the ground vertically.
Method 2: Wall Mounted
([)Punch two holes on the wall with a drill bit and insert the attached wall
plugs into holes. Then, twist the screws through the screw holes of holder
into the wall plugs.
@Adjust the angle, then tighten the holder and the light through the knob
screw. Adjustable Angle: horizontal 180°, vertical 90 °
OPERATION GUIDE
The default mode of the product is OFF mode. Press the back button to adjust modes when using the light.
LIGHTING MODES
Press the power button, turn on the solar landscape light. It will charge but not light up in the day and automatically be on in darkness or at night.
Short press once to switch among colors under below 3 Modes in a sequence:
Solid Color Mode
Red, Green, Blue, Max working time: 12 hours.
Cool White Mode
Daylight white(6500K) for daily illumination, Max working time: 12 hours.
Long Press the button for 2 seconds at any color mode above, it will shift to a dynamic status:
Color Cycling Mode
The solar light will change the color gradually in a cycle at a Low
brightness. Max working time: 12 hours; Short press the button, it will turn
to high bright color cycling. Max working time: 6 hours; Short press again, it
will shift to low bright changing. Long press the button for 2 seconds to exit
this mode to Solid Color Mode.
OFF
Keep hitting the button till it jumps over all colors to daylight white and
turns off then
WARM TIPS.
- lt is recommended to turn off the light and charge it under direct sunlight for 1-2 days before the first use. Make sure the product has enough power.
- During the installation, please make sure the landscape light is installed under direct sunlight where there is no shade or eave to shelter the solar panel. Otherwise, the lighting time will be shorter.
- Whether the solar landscaping spotlights can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather conditions, seasons, and other conditions.
TROUBLESHOOTING
- If the light failed to turn on, please check if there is any light source around;) charge the light for a while and then cover the solar panel to have a test; make sure you hear a clear “click” sound when you press the button
linkind
Our goal is to bring you the best shopping experience on Amazon. If you have
any questions about our product, please feel free to contact us. Our customer
service is right here to resolve the case.
Made in China
1-855-999-6677 (Mon.-Fri.9 to 5 PST)
service@linkind.com
http://www.linkind.com
Why not share your stories to help other buyers?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>