Linkind LS60001-RGB-NA-1 Neon Rope Lights with Music Sync Instruction Manual
- June 14, 2024
- Linkind
Table of Contents
Linkind LS60001-RGB-NA-1 Neon Rope Lights with Music Sync
Product Information
Specifications
- Function: Smart Neon Rope Light
- Color Options: 16 million colors
- Control Options: Timing & countdown, APP control, Voice control
- Dimming Options: Dimming from 1% to 100%
- Music Sync: Syncs with music rhythm
- Package Contents:
- Controller Box
- Power Adapter
- RGB Neon Rope Light
- Manual Instruction
- Fixed accessories (x9)
- 3M sticker (x9)
Function Introduction
Package Item
- Item List Quantity
- Controller Box 1 PC
- Power Adapter 1 PC
- RGB Neon Rope Light 1 Roll
- Manual Instruction 1 PC
- Fixed accessories 9 PC
- 3M sticker 9 PC
Led Neon Rope Light Kits
Installation
STEP 1:
Tear one side of 3M sticker release paper
STEP 2:
Apply 3M sticker to U-shaped accessory
STEP 3:
Fix 3M sticker horizontally, tear the release paper on the other side of 3M
sticker and stick to the required installation position. Refer to the diagram
below:
Fix the 3M sticker vertically, stick the release paper on the other side of the 3M sticker to the required installation position, and then use a screwdriver to insert the screw through the hole and fix the U-shaped accessory on the wall. Refer to the diagram below:
STEP 4:
Install the neon rope light into the U-shaped accessory
Introduction of the Controller
Installation Instructions
- After installing the smart neon rope light, power it on.
- The rope light will gradually blink R-G-B, and the light will enter the state of the distribution network.
- To connect the neon rope light to the Internet, download the Aidot
APP and follow the APP guidelines.
Quick Start Guide
-
Scan the QR code below, or search for “AiDot” in App Store or Google Play.
Google, Google Home, and Google Play are trademarks of Google LLC. -
Create an account and sign in. Tap’+’ to add the smart neon rope light.
-
. Follow the instructions on the App.
( Note : Please turn on Bluetooth and location. )
For more information about the usage guidelines and FAQs, Please scan the QR code below or visit the website: https://www.aidot.com/s/000038.
Warning
- This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
Cautions
To avoid personal injury and/or possible product damage, the following
cautions must be followed:
- To prevent early lamp failure, the lamp should only be installed in operating environments ranging between：-10℃ and +40℃(14° F and +104°F).
- Suitable for damp locations.
- Not for use with dimmers.
- The lamp dims via wireless control and will not operate with a dimmer switch.
Contact Us
SPRING SUNSHINE TECHNOLOGY CO., LIMITED
FLAT/RM 01-04, 24/F, FU FAI COMMER CIALCENTRE, 27 HILLIER STREET, SHEUNG WAN,
HK
Phone: 1-877-770-5727 (Mon.- Fri.
9 to 5 PST)
www.linkind.com
service@linkind.com
Made in China
- Manufacturer: Leedarson loT Technology Inc.
- Address: No.1511, 2nd Fanghu North Rd, Huli District, Xiamen, China