PROAIM FLCM-FLN-600N/750N Flowline Professional Series 12-19k E Ergonomic Body Support Instruction Manual
- June 6, 2024
- PROAIM
Table of Contents
PROAIM FLCM-FLN-600N/750N Flowline Professional Series 12-19k E Ergonomic
Body Support Instruction Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have
received everything that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo- copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.
Flowline Setup
-
Join Support Arm with Section on Support Jacket, by simple push-fit technique.
-
Slightly loosen all four Adjustment Knobs provided on back of Support Jacket to adjust the height of Support Arm.
-
Wear Support Jacket and tighten the buckles provided at waist and chest. Then adjust until you find it comfortable.
-
Adjust Support Arms on both sides. This will fine tune your Jacket to a comfortable position and also help in shifting weight to your shoulders and hips.
-
Loosen the knob on hook and attach camera with it. Tighten the knob back to ensure slip-free connection.
Note: When filming upwards/downwards, you might have to manually pull up/ pull down the camera setup at your convenience.
Note: Leave a gap of approximately 2cm/1” between the top of Camera Hook and Support Arm.
-
Finally, attach one end of Safety Belt with camera and other end with Support Jacket, for more safety & protection.
-
When folding Flycam Flowline, always make sure to put the upper part of Support Arm inside hip/waist belt and fasten buckle at the hip/waist belt. This will prevent Suspension Line from wearing.
YOUR FLYCAM FLOWLINE PROFESSIONAL SERIES ALL DRESSED UP AND READY TO GO!
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>