CREALITY 3D Print Mill and Infinit-Z User Manual

: June 6, 2024
: Creality

Table of Contents

CREALITY 3D Print Mill and Infinit-Z User Manual
Introduction
Parameters
Parts List
Install the Profile Support Frame
Install X/Y Axis Belt Assembly
Install the Spool Holder
Install the Display
Cable Connection
Leveling
Load Filament
Start Printing
Trouble-shooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CREALITY 3D Print Mill and Infinit-Z User Manual

CREALITY 3D Print Mill
and Infinit-Z-pro

Dear customer,
The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.

www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411 Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Notes

Do not use the printer any way than described in order to avoid personal injury or property damage.
Do not place the printer near any heat source or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA to calibrate and test the machine.
Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
Do not touch the nozzle or printing surface during operation as they may be hot keep hands away from machine while in use to avoid burns or personal injury.
Do not wear gloves or loose clothing when operating the printer. Such clothes may become tangled in the printer moving parts leading to burns, possible bodily injury, or printer damage.
When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle directly when heated. This can cause personal injury.
Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails or wheels. Use glass cleaner or isopropyl
cohol to clean the print surface before every print for consistent results.
Children under 10 years of age should not use the printer without supervision.
This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism manually while booting up, otherwise the device will automatically power off for safety.
Users shall comply with related nation and region’s laws, regulations and ethical codes where the equipment or produced prints by it is used, and users of our product shall not use a foresaid products to print any end-use products, objects, parts or components or any other physical prints that violate the national regional laws, regulations and ethical codes where herein referred product and produced prints by it is located.

Introduction

CREALITY 3D Print Mill and Infinit-Z-fig1

1 X motor| 2 Nozzle kit| 3 Printing platform| 4 Bed leveling nut
---|---|---|---
5 Belt tensioning screw| 6 Manual power switch| 7 X axis limit switch| 8 Extruder
9 Y motor| 10 Material rack and material tube| 11 Knob screen| 12 Knob
13 Storage card slot and USB socket| 14 Y-axis limit adjustment component| 15 Z axis belt motor| 16 Power cable connection

Parameters

Model	3DPrintMill
Print size	Infinite length 200170mm

(lengthwidthheight)

24/14.6A

Parts List

CREALITY 3D Print Mill and Infinit-Z-fig2

*Tips: the above accessories are for reference only, please refer to the physical accessories !

Install the Profile Support Frame

Step: Install the profile support 1 and profile support 2 to the bottom of machine with four hexagon flat head screws M5x12 (As shown in the figure above).

Install X/Y Axis Belt Assembly

Install the Spool Holder

Install the Display

CREALITY 3D Print Mill and Infinit-Z-fig6

Cable Connection

CREALITY 3D Print Mill and Infinit-Z-fig7

Leveling

First move the X axis to the contact part between the nozzle and the belt (slightly press the nozzle onto the belt).
Push the two limit switches against the X sliding block to lock the limit;
Press back on the screen to get the printer back to the origin; adjust the Y axis end-stop adjusting screw according to the position of the nozzle relative to the belt after back to the origin in order to make sure the nozzle contacts with the belt rightly; then tighten the Y axis end-stop screw, leveling finished;
if there is any seam or overcontact between the nozzle and the belt, adjust the leveling nut slightly.

CREALITY 3D Print Mill and Infinit-Z-fig9

When you want the temperature to rise, hang the filament over the filament holder.

Load Filament

When the current temperature reaches the target temperature, press and hold the spring of the extruder and insert the consumables into the charging detection hole one by one,then insert the consumables into the small hole of the extruder until the nozzle position.